22 modeli
Case for Ardusimple simpleRTK2B with lid. Dimensions 75 x 75 mm. 3D printable file case made for SKU AS-STARTKIT-BASIC-L1L2-NH-02. Construction features: - 3x metal thread ready (M3 screws) supports for motherboard raised fixing - micro…
Notes: Phase offset 80mm from bottom of pole mount. Designed for m2.5 hardware. Use the (4 mounting hole) battery holder variant shown in pictures. There is a 2 mounting hole variant that will not fit because the terminals are in a…
This is a case for the ArduSimple simpleRTK2B board Category: Engineering
Notes: Phase offset 75mm from bottom of pole mount. Designed for m2.5 hardware. Use the (4 mounting hole) battery holder variant shown in pictures. There is a 2 mounting hole variant that will not fit because the terminals are in a…
Simple small box for GPS RTK module - used for Vitulus robot , but could be usefull for anyone.
Printed on an ender 3 v3 se with PLA. Layer height: 0.2mm Nozzle: 0.4mm supports: only for the Base Required PARTS* 4x standoffs (they should come preinstalled with the k2b board) 4x M3*6 countersunk screws (to hold the board in place) *…
Also check out the Case for the Sparkfun ZED - F9R
Designed around several specific parts. See image for specifics
Basic case for the ArduSimple simpleRTK2B board with space for the WiFi module (and hopefully others too). I generally mount these boards in to tractors, so needed a case with flexible mounting options. I can screw mount or tie wrap this…
This is a case for the base station of the simpleRTK2B Starter Kit LR from Ardusimple ( https://www.marotronics.de/simpleRTK2B-Starter-Kit-LR-IP67 ) I bought the RTK Mower Alfred ( https://www.marotronics.de/GNSS-RTK-Mower-Alfred ) and…
KickPi K2B Case w/ 40mm Fan This is a case for the KickPi K2B Development Board: https://www.kickpi.com/product/k2b/ which is available from Amazon here: https://a.co/d/7kwtqUZ (Price fluctuates. I bought mine @ $26.59 USD, FYI)…
Simple case for the Ardusimple RTK2B Pro board, no internal battery. Holes are included with the intent to use them as light guides for internal LEDs. They should work with typical 1.75mm transparent PETG. Both top and bottom USB C ports…
The used i3 clone that I purchased for a very good price printed horribly and had many flaws. One of them being a bow in the pcb heated bed which left a rather large gap between the heater and the glass bed. I also noticed that the bed…
It's the Lulzbot Rock2Pus (AKA Rocktopus ) with a beer bottle! the original is from lulzbot https://www.lulzbot.com/rock2pus I added a hand https://www.thingiverse.com/thing:1039550 and a beer bottle…
I am “klipperizing” my old Prusa i3 (clone) and I designed this mount to attach it to the Heatbed and measure the resonances in the Y axis. To mount this part just insert the slot into the heatbed. It grips.
This is my adaptation of Ultimaker bed plate for MK2b heater. I've made 2 versions: One is based on original design for Ultimaker 2 heater with added mounting holes for MK2b heater. Second version is designed for my custom heater plate .…
A mount for RaspberryPi and simpleRTK2B on YardForce SA models. It was quite difficult to build an openmower/mowgli robot mower with SA models because of lack of place. So I took inspiration from…
Knob on a Northwood CNC decided to just, fall apart. Replacement was going to cost $34 after taxes and shipping... So why not spend 20 minutes and a dime worth of plastic? Made for a fanuc controller, but should fit any purpose that uses…
Box for ardusimple RTK2B with heading and bluetooth. simpleRTK2B Heading - Basic Starter Kit (ZED-F9P) - ArduSimple . Mounted with 4 rubberized magnets 22mm.
Basic case for the ArduSimple simpleRTK2B board with space for the WiFi module (and hopefully others too). I generally mount these boards in to tractors, so needed a case with flexible mounting options. I can screw mount or tie wrap this…
Knob on a Northwood CNC decided to just, fall apart. Replacement was going to cost $34 after taxes and shipping... So why not spend 20 minutes and a dime worth of plastic? Made for a fanuc controller, but should fit any purpose that uses…
This is my adaptation of Ultimaker bed plate for MK2b heater. I've made 2 versions: One is based on original design for Ultimaker 2 heater with added mounting holes for MK2b heater. Second version is designed for my custom heater plate .…
