Liczymy pasujące modele…
This is a parametrized KeyMod Picatinny rail designed to be printed diagonally for best strength, that I've designed for mounting my bipod to a handguard. It uses chinesium KeyMod screw set bought on AliExpress. Following dimensions are…
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
Just a simple KeyMod foregrip. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,2 Infill: 25 % Filament: DasFilament PETG Black Category: Sport & Outdoors
This Picatinny rail is designed for compatibility with KeyMod systems and adds a sleek and functional touch to your setup. Print Notes: For a clean finish on the side of the rail, be sure to enable supports during printing. After…
# GrovTec GTSW230 6 Inch 15 Slot Keymod Black Anodized [Product link](https://www.ozgunmart.com.au/grovtec-ar-foreend-picatinny-rail-adapter-6-15-slo~120813) ## Printing Guidelines: The printing orientation is as provided in the file. The…
Fore-end cover using the KeyMod interface for attachment to the weapon system. The upper surface features parametric honeycomb perforation , which serves as an anti-slip element (grip). In accordance with requirements, the end of the part…
This is a keymod flashlight mount for use with the tactical 588 lumen flashlight sold at Harbor Freight. I had to use supports everywhere, but it turned out pretty good. I had the minimum overhang angle set pretty high so that I didn't…
Front hand grip for AR-15 with Keymod mounting system. You'll need Keymod screws to attach it. Here's a video where I attach this print to my rifle. If you don't want to hear me babble on about other stuff, start at 8:52.…
Custom handguards for AR 15 with keymod mounting system. Will need supports. You'll need keymod screws to attach it. https://youtu.be/64Xc5Ai6wJ8 UPDATE Added a bottom handguard with a hand stop on it. https://youtu.be/Zsz355lkg-g…
If you have a labradar, you need the JKL PPrecision trigger. This will allow you to mount that trigger to a keymod rail
Remix of Toxic Sandbox Keymod angled foregrip. https://www.thingiverse.com/thing:2889845 I have also uploaded an M-Lok AFG. You can find the M-Lok AFG here - https://www.printables.com/model/304426-m-lok-afg-angled-foregrip Added lugs to…
Small AFG for Keymod rail, Odinworks inspired. Small but comfortable for a good hand angle if using a thumb over bore grip. I could only get it on with just the rear pin in place with the keymod screws i had which seemed short. It is…
Hand stop for a keymod style rail. Will also need the nut and bolt to mount it.
I created this because I know that this is a part that I will need in the future for my airsoft attachments. Print it with 0.2mm layer height, 10mm brim and supports enabled. Print this from the side that is touching the gun when attached…
DISCLAIMER: Since this is still just plastic don't expect for it to be able to hold some heavy attachments, it is meant for just some light and small things that won't be under heavy force. I myself have tested this part for a grip and it…
I created this because I know that this is a part that I will need in the future for my airsoft attachments. Print it with 0.2mm layer height, 10mm brim and supports enabled. Print this from the side that is touching the gun when attached…
AUG KeyMod Underbarrel Railsystem inspired from Corvus Defensio Railsystem for the Steyr AUG (STG77). Build from scratch with DesignSpark Mechanical 5.0 Only the KeyModNut is a Remix. Source:…
I created this because I know that this is a part that I will need in the future for my airsoft attachments. Print it with 0.2mm layer height, 10mm brim and supports enabled. Print this from the side that is touching the gun when printed…
I created this because I know that this is a part that I will need in the future for my airsoft attachments. Print it with 0.2mm layer height, 10mm brim and supports enabled. Print this from the side that is touching the gun when printed…
Needing a mount on my keymod rails to mount my flashlight pressure switch for use during a airsoft night game. It mounts to the rails using normal keymod nuts, I have designed some that you can print with a M3 nut. Adding some velcro…
These are keymod attachment rails for use with keymod RIS/RAS rails. I have made several sizes to try and make as much usefull sizes as I could think of that are still compatible with the original keymod sizing. There are 3, 5, 7, 9, 13…
After playing a couple of games with my M4 AEG I found that the plastic handguards were just not sturdy enough for me and looked a bit too stock. I then sat down and took my M4 apart and studied the Delta ring and gas tube connection,…
The original model used M-Lok mounting but I changed it so you can mount it to Keymod systems.
This is a remix that combines keymod a mounting solution with an inline Surefire Scout mount. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Category: Sport & Outdoors
A keymod handstop that happens to have the same size and shape as a Bravo Company KAG. Includes STEP files aswell as a STEP file for the template if you want to make a MLOK version. Print mount side down Settings used: Material: PLA+…
A small keymod handstop that happens to have the same size and shape as a Slate Stop. Includes 3 versions and STEP files including STEP files for the template if you want to make a MLOK version. Print mount side down Settings used:…
The covers are designed for the long handguard (16.75") for both Keymod and MLOK and sit tightly in the rails. A rubber hammer is recommended for assembly. For the design I took measurements and used the official technical drawing of the…
Keymod Cable Guide by Qwerm A set of small keymod cable guides. Designed for use with 3.5mm cables. Print Orientation: Print with face side down. Recommended Print Settings: Layer Height: 0.2mm Wall Line Count: 4 Infill Density: 30%+…
Remix of KeyMod Angle GripFor Airsoft fixed the keymod required holes increase the length to be usable on keymod rail fixed the design for a better print and look removed the angled base for better stability Category: Toy & Game Accessories
This is a flashlight holder for airsoft AEGs with M-lok or Keymod. The flashlight has a diameter of 25mm. Additional components needed: 2x M4x20 cylinder head screw 2x M4 nuts 1x Set of M-lok / Keymod screw and nut
Prints in two pieces for ease and strength. Requires (2) KeyMod rail hardware commonly found on Amazon/eBay.
I wanted to clip my SG Go timer on my rifle so I designed clip to be mounted on handguard. For assembly you need threaded insert M2x3x3 and M2 screw long enough to fit your accessory rail (I used M2x12 HEX screw) I recommend to modify…
Hello people! Great that you ended up on one of my designs! This is an Keymod Rail 3 slots. The design has been tested and works for all externals . Information: Filling density: 100% (I guarantee 100%) Support: Yes Material: PLA (The…
Hello people! Great that you ended up on one of my designs! This is an Keymod Rail 4 slots. The design has been tested and works for all externals . Information: Filling density: 100% (I guarantee 100%) Support: Yes Material: PLA (The…
Hello people! Great that you ended up on one of my designs! This is an Keymod Rail 5 slots. The design has been tested and works for all externals . Information: Filling density: 100% (I guarantee 100%) Support: Yes Material: PLA (The…
Hello people! Great that you ended up on one of my designs! This is an Keymod Rail 6 slots. The design has been tested and works for all externals . Information: Filling density: 100% (I guarantee 100%) Support: Yes Material: PLA (The…
Hello people! Great that you ended up on one of my designs! This is an Keymod Rail 7 slots. The design has been tested and works for all externals . Information: Filling density: 100% (I guarantee 100%) Support: Yes Material: PLA (The…
Hello people! Great that you ended up on one of my designs! This is an Keymod Rail 8 slots. The design has been tested and works for all externals . Information: Filling density: 100% (I guarantee 100%) Support: Yes Material: PLA (The…
Hello people! Great that you ended up on one of my designs! This is an Keymod Rail 9 slots. The design has been tested and works for all externals . Information: Filling density: 100% (I guarantee 100%) Support: Yes Material: PLA (The…
Hello people! Great that you ended up on one of my designs! This is an Keymod Rail 10 slots. The design has been tested and works for all externals . Information: Filling density: 100% (I guarantee 100%) Support: Yes Material: PLA (The…
Hello people! Great that you ended up on one of my designs! This is an Keymod Rail 11 slots. The design has been tested and works for all externals . Information: Filling density: 100% (I guarantee 100%) Support: Yes Material: PLA (The…
Hello people! Great that you ended up on one of my designs! This is an Keymod Rail 12 slots. The design has been tested and works for all externals . Information: Filling density: 100% (I guarantee 100%) Support: Yes Material: PLA (The…
Hello people! Great that you ended up on one of my designs! This is an Keymod Rail 13 slots. The design has been tested and works for all externals . Information: Filling density: 100% (I guarantee 100%) Support: Yes Material: PLA (The…
![[REPLICA] GrovTec GTSW230 6 Inch 15 Slot Keymod Picatinny Rail](https://media.printables.com/media/prints/eae493a0-47f2-4bf5-bc17-28a455c0a74b/images/10239750_391bc8e2-1bbb-499a-8c3b-e210203abea5_45f9e104-28c1-4521-81cc-70f34d7ab2a7/screenshot1.png)
