76 modeli
It's the big bolt from the Lethal Company game. I've been playing so much and I wanted to make some stuff from the game. Visit my site to support my work or just look around: https://www.shellingtonlabs.com If you don't have a printer or…
EMPLOYEE BALLIN' FREE MODEL Models height ~ 5.1 cm Model can be scaled up and down. ( for smaller prints i recommend using something like "horizontal expansion" in Cura at 0.3mm) Please share your makes! I would love to see them! 3D…
Model height ~ 4.6 cm Model can be scaled up and down. ( for smaller prints i recommend using something like "horizontal expansion" in Cura at 0.3mm) 3D PRINTING SETTINGS Layer Height: 0.1 - 0.2mm Wall Thickness: 0.8 - 1.2mm Infill…
Prints without supports (although you will probably want to scale it up ~200% for an easier time printing). You might want to add a few negative volumes near the tip of the hands/teeth if the slicer decides that the part of the tip should…
Pro-flashlight from the Lethal Company. It's really just a regular flashlight with the lethal company skin over it. Functions as an ok actual flashlight, would not recommend going to Titan with this. The backyard is fine. Assembly…
This traps a mouse inside and locks them in. Assembly It's pretty straight forward. First, put the lever platform inside of the main box. The thick end should be towards the opening. You will have to bend the side walls of the box…
I was looking for a smartphone stand with the option to charge the smartphone while in the stand. Since I couldn't find one, I designed my own stand. The current stand is actually the 5th revised version. This version has a hole on the…
Best non weaponized door stop on the internet Designed by: ChrisMUC https://www.thingiverse.com/thing:200571 Print instructions Printed in TPU using the 'Generic FLEX' settings @.2mm layer height. WARNING: You must use glue stick or some…
https://www.printables.com/model/6remixes from JayJey https://www.printables.com/model/259625-employee-of-the-month-fridge-magnet SeaHamsterr https://www.printables.com/model/682159-lethal-company-employee-figure…
Took me about 2 days to create this little version of a printable Hoarding Bug from Lethal Company! It isn't perfect but it gets the job done! Printed on the Ender V3 SE and used Ultimaker Cura as the slicer (used Trees as supports)…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Remix of Anastasiia_Szh's project, I reduced the polygon count in Fusion360 so that I could import the bug into TinkerCAD, which does not allow files over 25MB. That's pretty much the only reason I made this remix, have fun with it. How I…
Lethal Company | Employees poses | Figures - FREE MODELS Model can be scaled up and down. ( for smaller prints i recommend using something like "horizontal expansion" in Cura at 0.3mm) Please share your makes! I would love to see them! 3D…
i used orca slicer for this printing with auto tree supports and layer height at about 0.2 mm and i also upscaled it quite a bit ill post the pics here when im done
From Lethal Company, the Delivery Rocket. The model is 11 cm tall.
Im sorry that thar is not a helmet.
Es handelt sich um eine Nachbildung aus dem Videospiel "Lethal Company". 📏Gewicht: ~260g Maße: 21cm x 14cm Update 24.03.2024: new print files
The Bracken is made from 2 parts - the leaves and the body. The body needs to be 3d printed. There is an additional presupported version for resinprinting. The leaves are made from paper and need to be cut out. The .dxf file is for laser…
Keep your page in your book with the help of a crewmate as you spectate your teammates slowly perishing one by one on a barren moon in an abandoned facility you were never welcome in! Standard Settings work fine, Ironing might result in a…
I made this a while back and had one of my friends test the file as I don't currently have a 3d printer. Idk if this works with the 1.0 version of Dummy
3D preview Models height: ~ 3.3 - 5.1 cm | Model can be scaled up and down. | (for smaller print i recommend using something like "horizontal expansion" in Cura at 0.3mm) | Models not presupported! 3D printing settings Layer Height: 0.1 -…
Great original mode, but for everyone not living in America, we cant access imperial screws. This was designed to use a 3D printed thread section, which can be glued or left as is so the screw can be assembled and disassembled. The…
What you see is what you get. ☺ Data: Tablet holder to organize charging. For three tablets. Daten: Tablethalter zum Laden. Für drei Tablets.
https://www.thingiverse.com/thing:6348204 this guys helmet, just cut to fit a ender 3 also in-case you were wondering how to cut big models to fit a small printer, i used slic3r with the cut function to cut it up then export the models…
Cuteness can be lethal, especially when it comes to adorable babies who melt hearts wherever they go. Indeed, an excessive dose of sweetness can cause a flood of smiles and even make people fall in love instantly. To warn passersby about…
The Employee(Lethal Company) Fortnite Skin
gus redux verson haaaa
Lethal Company hair brush model. It can be used as a prop or back scratcher. Quick and easy to print
INTENDED USE: Print Domes, use plastic sheet (24" (circumference) x 14" x 0.020*" for walls. Use Printed Bracket to bolt the two tanks together using the ¼" holes, and ¼" EVA foam for the tank cross straps. * or thinner Backpack Straps:…
i made the bottles from the lethal game
This is a 3D model of the "Coilhead", a fierce and unpredictable enemy you will likely encounter, when scavanging the remnants of secluded and abandoned factories or mansions in the galaxy, for scrap to sell to "The Company". It is only…
Large Axle from Lethal Company. Modeled by hand to match the asset in-game since I couldn't find a great printable model online. PRINT AS MULTIPLE PARTS To print, download the LargeCog, SmallCog, and ThinRod (x2), and print separately.…
Dies ist eine kleinere Version meines Handyhalters: https://www.printables.com/de/model/906014-handyhalter Gut geeignet um zum Beispiel Tablets oder, wie auf den Bildern zu sehen, Monitore abzustellen.
Lethal Company - Lethal Love A loving mini-figure that is made for that special someone in your life. Whether it's a teammate or partner in crime, this figure makes a great addition to anyone's collection. Give the gift of love this…
A Lethal Company employee with a sign in his hand. Cut into two parts for best looks. You can add text to the sign. I got the best result with variable layer height in prusa slicer (0.25 adaptive setting and added details around the top…
I do comprehensive 3D scanning and you can see some of my results here. The models are partially edited with AI due to small or missing details. If you are interested in my work and have a specific interest, you can write to me and my…
Tablethalterung für ein Samsung Tab A7, die Halterung wirdmittels Schrauben an einer Unterputzdose angebracht. Ich habe einmal eine Version des Halters für eine Unterputzdose mit 60er Innendurchmesser erstellt und eine mit 68er…
Lethal Company Large Axle prop Printing in the original orientation is recommended. Slicer settings should ideally be optimized - the small struts can be a pain to print well if your printer isn't tuned. Happy printing!
Ein einfacher, aber nützlicher Halter für Tablets und Smartphones. Die Konstruktion wurde so gewählt, dass keine Stützen notwendig sind.
Die Halterung kann für viele Modelle benutzt werden, da der Abstand zwischen dem rechten und dem Linken Teil ändern kann. Ich habe dieses Modelle für mein Samsung Galaxy S7 FE gefertigt. Sie passt auch super gut. Du bräuchtest noch: 4x…
A carefully traced, multilayered sign featuring one of the most common connection errors in the game Lethal Company! I printed this at a 0.12mm layer height, but more typical layer heights like 0.16 and 0.20 could also work, just be…
I remixed this model, so you can add custom text to the badge. Easy to add custom text on Blender or Slicer (I use Orca Slicer).
Diese Adapterplatte ist speziel für den Tablet halter von Skoda erstellt. Um ihn mit der orginalen Halterung zu tauschen benötigt es einiges an Kraft. Die Adapterplatte ist extra für diese Datei:…
Print your own hoarding bug stencil just as it is, or scale it in the X and Y axes for a variety. Simply trace the outside, all your gaps in between, and you've got your very own hoarding bug!
its a non lethal weapon for self defense against an bad person trying to hurt you
Hierbei handelt es sich um eine Halterung für Smartphones und Tablets , die zum Aufhängen an einer Bettkante konzipiert ist. Es kann beispielsweise neben dem Bett angebracht und genutzt werden. Darin können Smartphones, Tablets und…
This is a reinforced Gopro mount for Lethal Conception Drakkar Frame
Hallo, hier biete ich einen Modularen Tablet halter für allerlei Tablets an. Ich habe hier eine Samsung Tab S7Fe. Es ist jedoch auch problemlos mit jedem Ipad oder anderen Tablets kompatibel. Ebenso kann es auch als Handy-halterung…
Kleinere Basis für die Halterung von https://www.printables.com/@Martinhensge_1708943
Ripped from the game Lethal Company . Original design credit goes to ZeekerssRBLX/Zeekerss, the (at time of writing) sole developer of Lethal Company . The .dds files are textures, the .png equivalents of which are the final two thumbnail…
Support pour GoPro Session pour le Drakkar de Lethal Conception. Tilt 25°, compatible filtres ND TBS Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes Resolution: 200 Infill: 20% Triangle Filament: Saint Smart…
Kugelkopf 17mm für Tablethalter/Handyhalter auf Stativ 1/4" Gewinde mit Ruthex 1/4" Gewindeeinsätze Druckempfehlung: ABS mit 0,1mm Layer im Kugelbereich und mind. 3 Perimeter
Support d'antennes Tracer et VTX pour le Drakkar de Lethal Conception Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes Resolution: 200 Infill: 20% Triangle Filament: Saint Smart TPU Black How I Designed This…
MagSafe Tablethalterung für K&M-Notenständer 10065 Nach Umstellung auf einen digitalen Musiknoten-Manager soll das Tablet am vorhandenen K&M-Notenständer 10065 sicher befestigt werden. Das 3D-Druckteil wird hierzu mittels der baulich…
Die Halterung wird an der Grundplatte befestigt und die Grundplatte kann wie auf den Bildern zu sehen, z.B. unter einem Monitor oder andere Schwere Gegenstände legen
Ein universel nutzbare Scherenhubteleskoparm hier als Rednerpult! Auf-Abbau in 1,5s, mehr Zeit für Redefreiheit!
Hierbei handelt es sich um einen Tablethalter, der anstelle der Lüftungsgitter im VW T4 montiert wird.
Unleash the ninja within and set your world on fire. This isn't just a 3D print—it's a path to total destruction and unmatched style. Whether you are obliterating targets or dominating the streets, this project brings the heat. Lethal…
Protection de bras + landing pads pour le Drakkar de Lethal Conception Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes Resolution: 200 Infill: 20% Triangle Filament: Saint Smart TPU Black How I Designed This…
Kleinere Basis für die Halterung von https://www.printables.com/@Martinhensge_1708943
I was looking for a smartphone stand with the option to charge the smartphone while in the stand. Since I couldn't find one, I designed my own stand. The current stand is actually the 5th revised version. This version has a hole on the…
Die Halterung wird an der Grundplatte befestigt und die Grundplatte kann wie auf den Bildern zu sehen, z.B. unter einem Monitor oder andere Schwere Gegenstände legen
I extracted the desk and its items from a ripped Lethal Company Unity project, and used the 14 model setup from my GeneralImprovements mod. I included STLs for both vanilla monitors (2 large, 8 small), and modded monitors (3 large, 12…
Derived from the original (thing:68139) I kept the base and changed the hanger itself. It does not come in the way of the tealights heat any longer. Backlight-effect is still the same and still beautyful. Instructions Just print the…
may shatter on impact (that is if you throw it hard enough), but thats all part of the fun.
This pro flashlight is approved by the company for useful assets such as you Instructions to print: -20% Infill -No supports -Wall thickness 1.6. (0.4mm width with 4 line width) -(optional) Brim for flashlight body
![gus lethal ape [NEEDS SUPPORTS]](https://media.printables.com/media/prints/a5251286-4f4c-492c-9ee4-64afc09bf936/images/11992339_c2e3c299-85c5-4f78-b31f-3c9e14ad2f30_ec209b97-5e88-4091-ae18-4f8d7b02015e/gus.png)
![Lethal ape sandman\ashy monster. [NEEDS SUPPORTS].](https://media.printables.com/media/prints/4b95145a-408c-434a-832d-fe114967a747/images/12068550_9cd13528-1113-4d05-96ab-7250aa3aff0f_cd0e7920-5f45-417c-98f1-bb8933167c16/screenshot-2026-02-16-103523.png)
![gus lethal ape redux [needs suppports]](https://media.printables.com/media/prints/5cd8871d-70b0-4384-a7dd-d9866ab52744/images/12004480_9e48c5eb-06ee-4810-bed6-10c96a3e0a69_afab2a87-f9f3-4f01-975e-8a61ee7f6b21/screenshot-2026-02-11-080717.png)
