Liczymy pasujące modele…
Created the model for this AliExpress camera: https://www.aliexpress.us/item/3256807991350522.html Added a 3mf model with supports already painted, only one part needs them. You will need two 1/8" screws and nuts to fix parts in place,…
If you engrave PMAGs and want consistent placement without the constant re-aligning, this 3D printable PMAG Gen 2 (G2) engraving jig is designed to help you lock in repeatable positioning and speed up your workflow. Built for 5.56 (45mm)…
Take your production to the next level with this Hat Clip Engraving Jig , designed for precise and repeatable alignment on both fiber and CO₂ laser machines. ✅ This alignment fixture includes a 6.5mm rail to ensure consistent placement…
Board camera cover and holder. A cheaper alternative to 8Mpx cameras for LIGHTBURN. Centered with optics, attached to the galvo motor cover (SG7110) The hole for the cable must be drilled as needed. For the galvo holder, don't forget to…
Lightburn Mount for IMX179 AliExpress Camera It's a camera mount for 2020 Alumunum Profiles. The camera can be mounted on the V-Slot and will require 8 M3x5 screws, no nuts. The print was designed for PETG but it can be also made with any…
Für meinen CO2 Laser ein Webcammodul damit ich die Kamera in den Gehäusedeckel des Lasers Montieren kann. Das Modul der Webcam ist eine 5MP Webcam das in das Gehäuse eingesetzt werden , das Gehäuse wird in den Grundhalter eingeschraubt (…
Created the model for this AliExpress camera: https://www.aliexpress.us/item/3256807991350522.html Added a 3mf model with supports already painted, only one part needs them. You will need two 1/8" screws and nuts to fix parts in place,…
I created a material library file from Creality's suggested settings for the 22W Falcon2/ Falcon2 Pro. I have the Pro model but I am guessing the settings are the same among both machines. You can open this file directly in Lightburn.…
This camera mount is designed for the Creality laser enclosure and allows you to securely install a camera used for real-time preview and positioning in LightBurn . It provides a stable top-down view of the working area and ensures your…
This custom mount integrates the ACMER A500 Camera directly onto the Creality Falcon 2 laser engraver frame. By securing the camera to the machine chassis, this upgrade maximizes the camera's potential and ensures consistent calibration,…
Mit dem Tool kann man deutlich schneller und effizenter die Kamera Kalibrierung in Lightburn durchführen. Kein umfallen oder verschiede Winkel bei den Kalibrierungsmustern (Kreise oder April-Tags) mehr. Stellt den Winkel ein und lehnt das…
Cut with more accuracy and create cleaner fills using Lightburn. Scan alignment and dimensional accuracy guide This video covers both of these items. You can see both the before and after results in my images(6000mm/m 0.18 line shift was…
If you engrave PMAGs and want consistent placement without the constant re-aligning, this 3D printable PMAG Gen 3 / M3 engraving jig is designed to help you lock in repeatable positioning and speed up your workflow. Built for 5.56 (45mm)…
If you engrave PMAGs and want consistent placement without the constant re-aligning, this 3D printable PMAG Gen 2 (G2) engraving jig is designed to help you lock in repeatable positioning and speed up your workflow. Built for 5.56 (45mm)…
Take your production to the next level with this Hat Clip Engraving Jig , designed for precise and repeatable alignment on both fiber and CO₂ laser machines. ✅ This alignment fixture includes a 6.5mm rail to ensure consistent placement…
Yet another enclosure for the 8Mp LightBurn camera. Uses 6 pcs. 10x3mm neobdymium magnets to hold the cam in place. Camera is just held in place with a pair of adhesive foam-pads. Build-in cable-relief to protect the small connector from…
This is designed for the Lightburn camera, specifically for the fisheye-120 but any variant should fit. This is designed to fit on the inside onto the handle-bolts of the lid of the laser engraver/cutter. Specifically the KH-750 but…
This is a custom mounting bracket for a Chinese co2 lasercutter that fits on the nuts of the handle it's best to print the camera case bottom with semi flex because it fits tight so the pins on the side don't break off
A camera enclosure based on the thing by athos76 with some more or less modifications and adaptions to my needs. Actually it is drawn from scratch. Details are in the file. Made of 3mm acrylic, the knob is made of 10mm acrylic You also…
Retoque el modelo porque la cámara tenía mucho movimiento una vez puesta y le faltaba más ventilación para que no se cal
This is a mounting enclosure for a camera I bought from Lightburn in 2022. Unfortunately the links they provide to download an enclosure do not fit the camera I bought. So I designed this to fit the 8MP 4K-W 120W degree camera and mount…
I downloaded the original 8MP camera mount from the LightBurn site and redesigned to print a little better with less support and also designed an additional neck mount for my galvo laser engraver. The neck on my laser might be different…
This is designed specifically for the camera that Lightburn sells for use in Laser Engravers/Cutters. It mounts to the underside of the lid, pointing down at the bed. The swivel allows the camera to be adjusted for angle and then locked.…
This is a CAD model from the IKier USB camera for Lightburn. Available in STEP Format
Height adjustable camera mount for Rapberry PiCam and non-adjustable height lightburn camera mount. .3MF file included so you can adjust or modify.
Board camera cover and holder. A cheaper alternative to 8Mpx cameras for LIGHTBURN. Centered with optics, attached to the galvo motor cover (SG7110) The hole for the cable must be drilled as needed. For the galvo holder, don't forget to…
Découvrez le guide de gravure parfait pour vos porte-clés en cuir, disponible sur Temu, Aliexpress, et d'autres plateformes. Conçu spécifiquement pour la gravure des deux faces, ce guide améliorera considérablement la précision de vos…
Due to the lower resolution and quality of the camera that QIDI sells, I upgraded to a 16mp lightburn motorized focus style camera and mounted it on the rail directly above the front door. Amazon link to Camera: https://a.co/d/ceiY27z
If you have laser head for Ender3 or other laser cutter/engraver you can cut these silent dampers for your motors. I have the small 5w laser head on my Ender so it's uneasy to cut 3mm cork but I did it with several passes and z-offsets.…
Camera I use with lightburn software: https://www.aliexpress.com/item/1005007231905118.html
