Liczymy pasujące modele…
ATTENTION! THESE PIECES ARE ONLY TO BE USED BY THOSE EXPERIENCING DIFFICULTIES FITTING CERTAIN PIECES TOGETHER FROM MY ORIGINAL MASTER SWORD DESIGN! Hopefully not many of you will need these pieces, but more than a few people who have…
I have printed the original from Dani Projects and as I wanted to glue the handles together, they wouldn't close fully. So I added some distance (total 1,2 mm) to them and it worked like a charm with no need of cleaning up. Use supports…
The bottom recess will fit a single 8x3mm magnet. I'd recommend printing with PETG if possible (less brittle). The original model was designed for assembly as opposed to print-in-place. Printing the parts separately will likely yield…
Print-in-place ratcheting capo design from Mikolas Zuza. Print the optional sleeve from tpu or wrap the arm in electrical tape.
This is a replacement shade ring (nut) for standard E14 lamp sockets (M28 thread). I designed this to be a bit beefier than the original stock rings, which often crack over time. I also designed it with looser tolerances than many other…
This is a remix of the Portable cable winder with larger gaps between the print in place parts.
This is a remix of elegant adapter designed by Pavel Hrčiak.
The original treasure chest puzzle box was a great design, but having to sand the parts was a drag. So some of the interfacing elements were tweaked, and now sanding is no longer required. Note: the top frame may not be a tight fit with…
The original slot provides almost no clearance for inserting the square nut into the extruder body.
Original ones didn't work well with my ender 3 pro and kobra neo. This part is edited for 0.4mm nozzle for easier printing on cheaper fdm printers
LISA SIMPSON - LOOSER - WALL ART
I really liked Sy's Peglock system, but was tired of scratching and hurting my hands trying to remove the board attachment. I don't mind a little wiggle room, and I don't need my mounts to be so sturdy that I can't move them. So, I scaled…
This is a remix of this hook: https://www.thingiverse.com/thing:2781654 I thought the fit was a little too tight on the pegboard, so I moved the pin down 0.5mm to create a little bit looser fit for when I want to relocate it. Print…
This is a simple remix of the DNA playset by emmett with looser joints for those that have trouble printing the original. Includes the stl files as well as the modified scad. To cite the original source: «... This is an accurate…
Print face-down. You can get the spacer from the original upload.
Thanks to https://www.printables.com/@mkoistinen for uploading the source so I could modify it!
I liked the original Nespresso capsules holder, but it didn't fit my capsules
The original bolt is very difficult to tighten. This modification solves the problem. Print on the head of the bolt. Without supports. Recommended number of perimeters: 4
Original slot has almods zero clearance for inserting the square nut in the x-carriage and makes it really difficult
Miniware ES15 case bit holder with looser fit, 6mm magnet holes, and 32 holes
This is a remix of the Ultimate Gridfinity Drawers 3x4 rack with looser tolerances for the drawer rails. With larger line widths or layer heights it's possible to print the original models and have <1mm rails, which then means lots of…
When I printed the beacon ventilation knob the cold indicator kept getting stuck so I added an additional .2mm tolerance to make it a looser fit.
I wasn't satisfied with the original tray since the holes were too tight and the spacing was inefficient. So I designed this insert that crams as many rounds into the original case as possible (297x) and makes it easier to get them in and…
Wheels for life counter for board/card games like Magic The Gathering/MTG. Different tolerances to fine-tune fit.
You are not a loser if you cant loosen a nut. But you could use one :) Simple tool for tightening or loosening nuts and bolts that can replace 6 most common wrenches. Cube includes following sizes: 6mm 8mm 10mm 12mm 13mm 15mm Recommended…
I really liked Derek's model of this filament guide, but it wouldn't clip onto my MK3S with a stock 6.35mm thick frame. I just added a rectangle negative space modifier into the slicer with slightly bigger than the exact dimensions of the…
Rope lenght: your height + 90cm (ex. i'm 183cm + 90cm = 273cm) consider an extra 15/ 20 cm for your knot Total height of the handle: 12cm Rope hole diameter: 8mm
I’ve created a BETA openGrid MultiConnect Lock Snap_Looser / Remover to help loosen the threads on the MultiConnect system. This allows for easier installation and removal during assembly and disassembly. To Find BETA openGrid…
Akaki has created a wonderful puzzle series, called the Picnic Basket . One basket uses multiple piece-sets to provide a multitude of puzzles. Some users (along with me) have found the pieces fit too tight and stick in the basket; some…
@tomi_one_3566063's angle finder was a bit too tight for how I wanted the angle finder to interact with this print, so, I remixed this to be looser with printer tolerances in place.
Wider cut-out for the Meistergriff deburring tool (amazon.de ASIN: B093PQXJCS) Printed on a GEEETECH Mizar S, with white GEEETECH PLA @210°C and 50°C bed temp with a 0.6 mm nozzle, scaled it to 101% to fit no support needed
Small edit to the barrel to increase the ID to 16.1, so darts dont get stuck inside it.
Customized version of https://www.thingiverse.com/thing:2482372 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2482372 Instructions Using the following options: name = looser font = 9 textSize = 30…
Ultra Silly Shell except some varied internal sizing for performance since Ultra is stiffer and pickier. Available in .1mm-.25mm radial increases, so 16.2mm-16.5mm ID. Any licenses, limitations, permissions granted by the original…
For best results, print rotated to 90 degrees on X, this way there is less stress on the locking part. Print with supports,
I found the tolerance between the two pieces of the original hook way too tight, and even the remix by Rahmi (.3 mm) still didn't slide freely. Not sure if it was the rougher surface of the wood filament I'm using or what, but I needed a…
looser fit different heights for different types of filters of total height: 10.4mm 12.6mm 17.6mm 22.4mm
This is a version that decreases the tight tolerance a bit, so you can fit more of them together easily.
Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3045130 Instructions Using the following options: faces_segment = 6 textstring1 = looser…
The original pieces had a very tight fit, these are a little smaller
I made this model with a Mac SE in mind, but it should fit perfectly in any standard 3.5" bay. It was just right for my application. A STEP file is included in case you need to make further modifications - see also my STEP version of the…
Basically I couldn't get mine to fit right so I decreased the gap by 0.2mm. it should be compatible with any levers or lugs you might have already printed
Print face-down. You can get the spacer from the original upload.
Wheels for life counter for board/card games like Magic The Gathering/MTG. Different tolerances to fine-tune fit.
Original slot has almods zero clearance for inserting the square nut in the y-rod holder.
