2513 modeli
Train station model created in Fusion 360 from a project foundable on http://www.smpd.cz/olympia/projekt.html Print instructions For easy printing, model is sliced to 4 parts which can be easily glued together.
Wydruk około 15,76 €–19,26 € nettoWstępna wycena jednego wariantu
This is a stubby nozzle for the Milwaukee M18 FUEL Blower. This nozzle is for the NEW blower model (3017-20) that Milwaukee just released in 2024. I couldn't find one available for this model yet, so made my own. I was able to get it to…
Wydruk około 13,60 €–16,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed a super short nozzle for my M18 Fuel blower to help with cleaning tasks around the shop. People also like these nozzles for drying their cars after washing. I printed at 1.5mm line width using a 0.8mm nozzle and 0.3mm layer…
Wydruk około 3,91 €–4,78 € nettoWstępna wycena jednego wariantu
I have change a few details from Sean&Lucia model. All the fillet are now chamfers Added chamfer in the bottom corners to add strenght Added chamfer were the Packout sits for a better stability of the case in the bracket The top surface…
Wydruk około 9,57 €–11,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Heavy-Duty holder for Milwaukee M18 batteries, which was created specifically for the larger high-demand and new FORGE batteries. The holder can be mounted on the wall (designed for 4.5 or 5.0 mm screws), but since the batteries also lock…
Wydruk około 3,17 €–3,88 € nettoWstępna wycena jednego wariantu
Small, simple building you need on your model railway. It is for the train driver, engineer or some linemen. Scale H0 / 1:87. Print all pieces and glue it together. Layer height: 0.2mm Support: No I printed it with white PLA. I primed and…
Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu
Created to mount your the Milwaukee PACKOUT bins on the IKEA SKADIS!
Wydruk około 1,95 €–2,39 € nettoWstępna wycena jednego wariantu
This cleat fits perfectly in the wide opening of the lid. You can use it to attach things to the lid of your packout cases. Print with no suppports
Wydruk około 0,65 €–0,80 € nettoWstępna wycena jednego wariantu
This is a snap in place label for the Milwaukee Packout Organizer; model 48-22-8430
Wydruk około 1,91 €–2,34 € nettoWstępna wycena jednego wariantu
These tags simply snap onto the aluminum corner posts of the Milwaukee Packout Bins. Print with PETG for best results. I have redesigned the original version so that they do not require any gluing/ds taping, they are much easier to…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The model is inspired by modern real-world Jersey barriers and focuses on clean geometry, realistic proportions and easy integration into different layouts. The barrier is modular , allowing you to print and place multiple segments side…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
U závory (prkna) je možné poslední vrstvu vytisknout červeně. U stojanu závory je nutno po odstranění podpěr model přibrousit. Následně s vteřinovým lepidlem slepit Pokud se vám mé modely líbí, nezapomeňte mě podpořit v dalších výtvorech!…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
A set of parts bins for the Milwaukee PACKOUT 3-Drawer Tool Box (48-22-8443). Based on @pmirf_140495's design, but these should fit the newer tool boxes with the added reenforcing ribs. I also added a set of bins which can be inserted for…
Wydruk około 5,38 €–6,58 € nettoWstępna wycena jednego wariantu
Every M18 Bit Holder I have found cover the cooling vents for the motor. So my design goes over the top, while still avoiding the cooling vents. I prefer this for the life of the drill.
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
printed in PETG 0.3MM layer height
Wydruk około 1,92 €–2,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple cover to protect the new, red Milwaukee guide rail. This is simply pushed onto the rail on the right and left and clamps by itself. It reliably prevents damage to the ends. Best printed with TPU, ASA or PETG. No supports…
Wydruk około 1,28 €–1,56 € nettoWstępna wycena jednego wariantu
This is a protective cover for the Milwaukee 2367-20 M12 ROVER Service and Repair Flood Light with USB Charging.
Wydruk około 2,87 €–3,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I love the little Milwaukee FMCS cordless circular saw, not only for metal, but also for wood! But unfortunately there is a problem: Milwaukee does not offer a way to use the saw guided on the rail for whatever reason. To finally solve…
Wydruk około 9,82 €–12,00 € nettoWstępna wycena jednego wariantu
Milwaukee M18 Battery Holder with Charged / Needs Charged Flags 4 Model files available, With and without the locking part for the battery clip as well as with and without the charged/ needs charged flag.
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
This is a horizontal (box) or vertical (wall) mount for the Milwaukee M12 FIWF12 0.5inch impact driver. It mounts with a just a few screws. I use this for my box with powertoolholders (see my other models/collections).
Wydruk około 3,31 €–4,04 € nettoWstępna wycena jednego wariantu
I have a unique space and I wanted something to “holster” my M12 installation driver on the underside of a shelf above my standing desk. Most options I could find were wall mounts. I printed it with minimal supports standing up. Due to…
Wydruk około 5,79 €–7,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model allows you to expand or replace tracks in your LIDL/IKEA railway sets. The set includes straight tracks in various lengths from 35 mm to 180 mm and 90° curves. And set also includes curved tracks in various lengths and angles…
Wydruk około 2,14 €–2,62 € nettoWstępna wycena jednego wariantu
Print the two walls separate, bend and glue into place.
Wydruk około 3,40 €–4,16 € nettoWstępna wycena jednego wariantu
Cable box holder 160x62mm for Ikea skadis or similar. If you need it in a different size you can always try to scale the model without hooks and add the hooks later. The brand of cables I use:…
Wydruk około 3,09 €–3,78 € nettoWstępna wycena jednego wariantu
This model represents a generic industrial interlocking concrete block system , inspired by real-world construction and infrastructure elements, commonly used for retaining walls, temporary structures, ballast containment, and industrial…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
This variant supports the stock hex key that comes with the cutoff tool, and other minor improvements. Changes from the original: Hex key retention slot to hold stock M12 hex key that comes with the cutoff tool Arbor retention moved to…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Jeden z elementów organizacji warsztatu
Wydruk około 10,63 €–13,00 € nettoWstępna wycena jednego wariantu
Designed for maximum realism , it is ideal for trackside scenes, stations, yards, depots, and urban or suburban areas on model railway layouts. The fence features: Accurate proportions based on real FS concrete fencing Clean details…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
This is a horizontal (box) or vertical (wall) mount for a milwaukee drill driver type 2407-20. It mounts with a just a few screws. I use this for my box with powertoolholders (see my other models/collections).
Wydruk około 3,51 €–4,29 € nettoWstępna wycena jednego wariantu
I really liked the original HtRabbit model, so modified it for vertical mounting of some tools Never really know which battery I will need until I start the project, so included a battery mount above.
Wydruk około 5,69 €–6,96 € nettoWstępna wycena jednego wariantu
This is a convertable track for wooden railways. Requires 4x M4 x 20mm screws. Further information and instructions can be found here: https://holzeisenbahn.schreinerman.de/chamaeleon-gleis
Wydruk około 1,51 €–1,84 € nettoWstępna wycena jednego wariantu
In the Netherlands we have this saying: “You can't always roll a six". For when stuff isn't going as you wished. In dutch: “je kunt niet altijd zes gooien” So to prove that wrong I made this silly cube that has six indents on every…
Wydruk około 0,52 €–0,63 € nettoWstępna wycena jednego wariantu
These plates fit in the Milwaukee toolbox to organize your bench dogs. I modeled the inside of the organizer trays in the toolbox so the 3 plates fit perfectly. I then made 9 holes in each for 20 mm bench dogs. Simply print and drop them…
Wydruk około 2,64 €–3,22 € nettoWstępna wycena jednego wariantu
This model represents a realistic H0 scale parking bollard / car park barrier , designed for use on model railway layouts, urban scenes, parking areas, streets and dioramas . The shape and proportions are inspired by common European…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Wanted to put my Ryobi Hot Glue gun on my Wall Control board but I use a battery converter for Milwaukee so I made a tray to hold it. This is the Ryobi => Milwaukee Battery Adapter I'm using: https://amzn.to/3FzSqHO
Wydruk około 3,91 €–4,78 € nettoWstępna wycena jednego wariantu
This is my version of the Why Always Me (Warum immer ich) dice game. Most versions of this game have either 6 holes or 12 holes, but not both. My version can be played with only a few people (6 holes) or a lot of people (12 holes). The…
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
Extra Boden der unter den Rollwagen geschraubt wird. Metabo hat hier bereits Bohrungen für Schrauben vorgesehen. Sollte möglichst massiv gedruckt werden, falls der Staubsauger mal über eine Stufe gezogen wird… Support Filament: PETG
Wydruk około 11,41 €–13,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Motivation For the proper installation of the Paulmann LED Set 3x3W (Mirco Line) I needed a housing for the assembly into a hollow wall. I also wanted to place a Shelly switch into the housing, so some additional space was added for…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wolf Cola : Always Sunny in Philidelphia The Public Relations Nightmare.
Wydruk około 7,33 €–8,96 € nettoWstępna wycena jednego wariantu
Milwaukee M18 Battery Holder With Lock. So yit can be used inside van etc... Easy to print. Also I have created "short" version of this without lock to use inside workshop. https://www.prusaprinters.org/prints/53685 Print instructions…
Remix eines Batteriehalters für Milwaukee M18 Akku. Boden abgeflacht um mit PLA bessere Druckergebnisse zu erhalten
This is a remix of the wall mount on thingyverse. Converted from a single to a double mount to make life easer and not as frustrating. Increased to 6mm holes Made larger Screw Counter sink to accomodate decent screw to hold to wall…
Need a little extra storage for nuts and bolts readily accessible? maybe a drink holder. versatile storage crate for Milwaukee packout system. Print at scale, supports may be needed along bottom of crate depending on printer. crate itself…
Printed .2-.26 layer height. I like to use 20% infill, could go more or less. Mounting holes made for #8 wood screws. Added an extended version for tools with the metal belt clips on them. Another extended version added with deeper…
Note!** June 13 2022 Version 5 Released. ** - Increased spacing and set back to accommodate the Larger 3 amp and up battery sizes - Added single and 2 unit shelves if you don't have 3 - added profile and snugged fit for better hold and…
I designed this in freecad, it prints fine at 0.3 layer height 0.45 line width with a 0.4 mm nozzle. print with supports for the Grove
Watery counters are a problem of your past! This super handy soap dish is a stylish addition to any sink or shower. It will also leave your counters, and your bar soap, bone-dry and ready to use. Leave it on the lip of your sink to allow…
Please drop a like if you want to see more of this kind of stuff:). I remixed this model with different tolerances to make sure the batteries stayed on the wall above my busy work bench and vibrations from the tools. 3 battery Holder for…
I needed an accurate (tighter tolerance) cleat for the bottom of the Milwaukee Packout so I started from scratch and modeled my own.
Organize your M12 Milwaukee tools with these mounts. Extended version for radio, but could be used with other tools if you need them sticking further off the wall. Printed in PLA, I like to use 3 walls and 20% cubic infill but they are…
I was designing very specific Packout receiver to fit a toolbox and someone mentioned making a standalone universal receiver. This receiver can be used in pairs to hang a full Packout box or standalone to hold items that only have one…
See update notes below ↓ 1-8-2026 This is to store a Milwaukee router inside the Packout Compact Organizer box by Milwaukee. The parts bin could use a lid but I don't plan on having much else inside this area other than the vacuum shroud.…
This is a blank insert I made when I created My Router Case for the Milwaukee Packout Compact Organizer. I have this shared as part of the files but I figured I would make it a seperate model. 3mf, stl, and step files included.
Universal Cordless Impact Driver/Drill Holder A universal cordless Impact Driver/Drill Holder meant to organize your workbench as well as make it more ergonomic and easier to use. Front extrusion allows for it do double as a bottle…
printed at 30% or better for strength, best to use PETG or ABS if used in hotter spaces.
I wanted to store my M18 batteries mounted to the inside of a drawer with the tools they power and not dig to find one. Unlike other M18 mounts, this model keeps the battery secure simply through friction, the battery does not "click"…
Straight and angled tool holders + a quad battery holder for mounting Milwaukee M12 system power tools on Wall Control or standard pegboard. I've made both a heavy-duty version with a 3rd leg for extra stability and a standard version…
Prints upright with no supports necessary. Two small supports designed into the model. (should pop right out) Adding wires and connectors is up to you. Designed around the M18 Red Lithium batteries that I have. Cannot confirm fitment for…
Converted @Zer0sum's design into Fusion 360: Modified chamfers to better match Packout design Adjusted tolerances for a better fit Added mounting holes for #8 Screws Upsidedownified = ready for printing without supports Modify the .f3d…
This will securely hold an M18 grinder or oscillating tool and should work with most other brands as well. I recommend printing with four or so parameters for strength. No supports are necessary. The included holes are sized for #6 wood…
Train Tracks - Dragon Railway S - Scale (1/64) 22.5mm size (Standard gauge) The train tracks are a part of the Dragon Railway Recommended Radius : Minimum 400mm Whats included: Straight tracks 50mm 100mm 150mm 200mm 250mm 300mm Curved…
UPDATE 08.03.24: Added a new version (Milwaukee Charge Mount 3 v8). Did some edits on the holes and beefed up the side brackets. This virtually eliminates any wobble. Also, rebuilt the small mounting tabs… better fit. To be honest, I use…
This model allows you to mount the M18 batteries for the Milwaukee tool system on or under a shelf, or on a wall. The batteries snap in using the same retention mechanism as they do on the tool. This lets you mount them where it's…
its just a rough approximation of the inside of the Milwaukee Packout compact organiser case for you guys to edit for specific things you wish to put in it. I think i have seen something online but this is modeled by me and is far from…
This is a CAD blank for the internal profile of the Compact Milwaukee Packout Organizer. I have supplied both the original fusion file and a .step file. Feel free to use it as a way to satisfy your endless urge to organize as as a kind of…
Decided to make my own version of the M18 battery adapter. This is a bit more involved than some of the others on here. Its two pieces which can be printed without supports. It uses 5 M3 flat head screws and nuts to hold together. The two…
A battery carrier/tote for Milwaukee 18v batteries. It's stable and won't tip over even when fully loaded on one side. It also includes a quick connect wall mount. Uses a pair of 8g stitching screws like these -…
Couldn't find a decent mount for these so I made it myself. They are not perfect, but work great for me. Only caveat is being that these tools weren't designed with mounting in mind actually placing them on the mount is a little tricky.…
Full Guide: Instructables The EMD F7 is a diesel-electric locomotive model produced by General Motors' Electro-Motive Division (EMD) between 1949 and 1953. The F7 locomotive scale model is a highly detailed and accurate replica of the…
Milwaukee M18 Battery holder that you can use to mount 4 batteries. The initial holder design was created by https://www.printables.com/social/69337-vikgr/about . The design has space, so you can easily press the buttons on a battery to…
This is a modified version of packout hangers from blahblahblahresearch. I wanted these to have the recess for the charger's base feet to be 90 degrees from the original design and far less tall so that the charger is more stable in the…
nozzle for the Milwaukee 2724-20 M18 FUEL Blower there's one thicker one and one thinner one
These feet allow you to attach anything you want onto your Milwaukee packout toolbox. Post-Printing To help the bolts thread through the parts easier, I drilled out the holes with a 6.5mm drill bit. How I Designed This I've decided to go…
This Milwaukee M18 battery holder mounts to the wall and positions the batteries horizontally at a slightly upward angle. This allows for the batteries to be stored closer together than the traditional vertical holders.
I've included a blank label and “Rotary Tool”. Easy to add text in a slicer - I used BambuStudio. I used raised text and printed on the face with supports. You could also print the text flush for a cleaner surface and no supports needed.…
I designed some Battery holder for my Milwaukee M12 battery to organized them. Printing: Printer: Mk3s+ Material: PLA/ PETG Infill: 15% Layers high: 0.3mm Note: The bigger Battery's (4-5) are not fitting in the 2Ah battery holder.
PackUp Labeled Nesting and Stackable Bins for Milwaukee Packout Organizer Models 48-22-8430 and 48-22-8435 A nesting divider bin system with customized labels for your Milwaukee Packout organizer. October 23rd 2025 Updates: Parametric…
My battery cover had fallen off due to abuse and machine coolant exposure, which degraded the original cover. This is a replacement cover for the Milwaukee M12 battery, this works for the small stubby type shown in the picture. It clips…
Editable insert for the thinner, Low Profile organizer. The over all inside height should be 38mm.
You'll most likely want a mix of files for your exact needs. If you're using a 48-22-8436 5-Compartment Low-Profile Compact Packout , you can fix 3× Slim Long Bit Bins (or a mix of half-width bins) If you're using a larger 48-22-8431…
Please as a simple return for the job... Like, Share, and Post your prints ! Thanks ! Optimized for printing vertically like a breez.. No supports needed ! ;) Original file fit on 35mm diameter tube (Festool, Bosch,…) Update 05 November…
These Packout low-profile organizer labels are inspired buy Dan Winciker’s Milwaukee Low Profile Packout Bit Set Label thing on Thingiverse. I have re-modeled the labels in openSCAD so that you can customize the text on the label and…
This is a clean and simple Milwaukee Packout Rail bracket. It is probably the most cost affordable design out there as there are no addition screws, nuts, or extras to purchase. Print Instructions: Please print 1 at regular orientation…
Dividers for stock factory Milwaukee Packout Deep Bins; divides bins into halves or quarters.
Mount your Milwaukee M12 or M18 Batteries cleanly to your wall! 2 of each file are available. “Non Locking” files will not retain the battery, better for shop or home storage where vibration and movement are not an issue, and easier to…
An HO-scale bridge for railway modeling. The length is 230mm, about maximum I could fit into my printer. Most parts required 45 degrees rotation. Internal width for trains is around 54mm, full width is around 75mm. Internal height is…
M12 wall mount for drills. Keeps the drill close to the wall.
AutoCoupler Cutaway educational model of an automatic coupler designed for 3D printed model trains. The coupling can be disengaged with very little force. Original Auto Coupler Check out the Dragon Railway ecosystem! Join our : Discord If…
Fits this case: https://www.milwaukeetool.com/Products/48-22-8435 https://www.homedepot.com/p/Milwaukee-PACKOUT-5-Compartments-Small-Parts-Organizer-48-22-8435/303005752 Make a custom organizer for your stuff!
This will securely hold any drill type M18 tool, and should work with most other brands as well. I use these to store my M18 drills, impact wrench, and impact drivers. It even works with other tools that have a pistol grip, such as the…
Magnetic Bit holders for the trays that come with the Milwaukee slim low profile packout compact organizers. Uses 6x2mm magnets https://www.amazon.com/dp/B07KJ9H31P?psc=1&ref=ppx_yo2ov_dt_b_product_details Super glue the magnets on the…
Angled battery holder for Milwaukee. In 2 versions. Version 1 for screwing with wood screws or version 2 for hexagonal screws. Angewinkelter Akkuhalter für Milwaukee In 2 Versionen verfügbar, Version 1 zum festschrauben mittels…
I needed af holder for my M18 batteries in my van, and I wanted it to be easy to print. There is no click lock on the model, the battery is supposed to be held in place by friction mine is printet in ASA but works well vith PLA,PETG,ABS…
Full Guide: Instructables The GP60 is a diesel-electric locomotive made by EMD in the 80s. It was used for freight trains and was known for its cab-forward design and improved fuel efficiency. Despite being largely replaced by newer…
Drill holes without the mess! I had it print on the face that touches the wall with supports for 50 degrees.
I couldn't find one I liked so I decided to design my own. I print these in PLA+, 0.28 layer height, 6 walls and 45% infill with a 0.6mm nozzle. Supports everywhere and they break off pretty easy and clean with the right settings. Maybe a…
This is a level holder for the milwaukee packout. I designed this to fit a Milwaukee level, 4' and up. The width and height dimensions it is based off of is 1.4" x 2.75" plus 1mm clearance on all sides. (some levels have a 3" dimension…
I decided to clean up my tools. Started with wall control and then added more metal pegboards later. The pegboards I ended up with have smaller holes so I modified the anchors to suit mine, both are included. These will fit both pegboard…
I printed these with a .8mm nozzle so they are pretty stout.
Full Guide: Instructables The EMD GP7 is a type of diesel-electric locomotive that was manufactured by the Electro-Motive Division (EMD) of General Motors between 1949 and 1954. The GP7 locomotive scale model is a 3D printable and…
