Liczymy pasujące modele…
I have created this printable maggot model for use as fishing bait or just for good old-fashioned pranks. Printable with filament or resin. A flexible material is probably best to use. The printed model is about 22.5mm long by 8.9mm tall…
Easy printable form / mold maggots
Marvin the Martian's Rocket Ship - the Martian Maggot by RebelTaz This is Marvin the Martian's Rocket Ship - the Martian Maggot. It's modeled based on the ship in the original " Space Jam " movie. I printed this in resin, so I have…
📄 Description This mounting bracket is designed to perfectly integrate an Anker MagGo MagSafe charger into Dacia vehicles equipped with the YouClip system. Although some Dacia models offer an optional wireless charging pad, iPhones often…
All Parts are oriented correctly This stand is assemble by sliding and pushing in position the toe main parts , it will be enough to hold the parts together and snap it out it when you need to travel. All the colored parts are for…
I needed this charger to sit flat so I could fasten it with VHB in my car. The holes on the side probably allow some cooling to happen, they are primarily there to allow you to pop the charger back out of the holder.
I wanted to be able to use a MagSafe charger in my vehicle with my Unholey Mount that uses the Ram mounting system. The official Ram mount uses the Apple MagSafe charger. The Apple MagSafe charger magnet was too weak to display my phone…
This model is based off of its appearance Dark Souls series: I made these models myself - they are hand sculpted from basic cylinder shape in blender software. No custom brushes or library of tricks. yet. You can scale the model however…
I wanted a stand for my new Anker MagGo Ultra-Slim 10,000mah Power Bank (affiliate link) to sit on my desk, so I made this one based off Apple's Twelve South Forté MagSafe Stand. I highly recommend the power bank, it's the best one I've…
I was tired of needing both hands to unplug my phone and then remove it from the RAM mount. So I upgraded to MagSafe. After some testing, I found that the Anker MagGo had stronger magnets than the original Apple MagSafe charger. The…
Made a version with a power button cut out to charge AirPods Pro without needing to take the bank out to push the button
Quite simple model of stand for Anker 633 with Apple Watch charger. I suggest to use stiff filament like PLA or ABS.
All Parts are oriented correctly This stand is assemble by sliding and pushing in position the to main base , it will be enough to hold the parts together and snap it out it when you need to travel. I recommend using ABS,PETG or ASA, PLA…
A 2x1 gridfinity organizer for the Anker Powerbank 622 MagGo (5000mAh). 15% Infill 0,2mm
Holds the power bank in any virtical orientation This power bank 6U high Printables | MakerWorld
I recently got a new set of drawers and due to the size of my bedroom I had to lose my bedside cabinet. I do On Call a lot and so I need to see my phone in the middle of the night. Rather than just have a magnet/wireless charge I made a 2…
Print two slider mounts and one charger holder. Snap the mounts onto the main part of the charger holder, with the flat side towards the mounting surface. Put the charger in (plug first through the slot), and it should be a friction fit.…
CALLIE MAGGOT BONE - UGLY AMERICANS - WALL ART
Please like before downloading the model. Thank you so much for your support ✌ This is an older model; find my latest models on Instagram @artmancults. bait model and bait form for fishing for predatory fish the hole for the screw is 6 mm…
Modular Bait Box scatola porta esce modulabile da stampare come 2 oggetti divisi
A gridfinity base for Anker's MagGo 2-in-1 charger that I made for my nightstand.
Simple two-part mold for casting your own soft maggot fishing lures. The mold features a central injection channel to make multiple baits at once. Just clamp the two halves together and inject your material. It works great with standard…
Please like before downloading the model. Thank you so much for your support ✌ This is an older model; find my latest models on Instagram @artmancults. bait model and bait form for fishing for predatory fish the hole for the screw is 6 mm…
I had bought the cupholder mount because my previous one had completely destroyed itself and this new one didn't have support for my ball and socket based magsafe mount. I had an Anker A25M0 wireless charger around and i wanted to have it…
Please like before downloading the model. Thank you so much for your support ✌ This is an older model; find my latest models on Instagram @artmancults. bait worm 3D print mold 1. stl form of worm bait 4,5cm 2.stl bait 3D model for print…
Please like before downloading the model. Thank you so much for your support ✌ This is an older model; find my latest models on Instagram @artmancults. bait earthworm 3D print mold 1. stl form of earthworm bait 13cm 2.stl bait 3D model…
A gridfinity base for Anker's MagGo 2-in-1 charger that I made for my nightstand.
📄 Description This mounting bracket is designed to perfectly integrate an Anker MagGo MagSafe charger into Dacia vehicles equipped with the YouClip system. Although some Dacia models offer an optional wireless charging pad, iPhones often…
Print with PEG/ABS or other outdoor appropriate material. Best to use the like color of the fruit you're trying to protect. After printing, coat the outside of the trap with Tangle Foot or other insect tacky coating, and hang multiple in…
Print out of PLA or PETG Has letters that you can print separate and insert or use multiple filament printer. 3mf has the lettering
This model is an add-on cover for the Anker model A2544 2-in-1 MagGo charging stand to hold and properly align an Apple AirPods Pro 2 charging case with the base of the charging stand. The main cover can be printed upside-down without…
I could not find a case sized small enough to just enclose and protect the Anker 621 MagGo power bank. I saw Ariel 3D's TPU iPhone battery pack case and thought it would work out nicely if scaled to the right size. Printed mine in Sain…
About Anker's MagGo Wireless Foldable Charging Station is a pretty cool product for traveling but I found it unpleasant and flimsy to use at home, so I made this housing that sticks to your desk using double sided tape, making the charger…
A simple stand designed to hold an induction charger. I wanted one that could be secured to my nightstand. The cabling is routed through both parts and exits through the bottom of the “clamp”. The “clamp” isn't a clamp, it's rigid with a…
Inspired by “MagSafe Charging Stand (Standby Mode)” by @GrantG . This is a phone stand designed to hold an Anker MagGO Qi2 15 W Wireless Charger . See the 3MF files to print the holder with the honeycomb pattern (disable top and bottom…
I was tired of needing both hands to unplug my phone and then remove it from the RAM mount. So I upgraded to MagSafe. After some testing, I found that the Anker MagGo had stronger magnets than the original Apple MagSafe charger. The…
Apple maggot flies go after anything that looks like an apple. If said apple-looking-thing is covered in Tanglefoot, they get stuck to it and, most importantly, don't dig into an apple. Post-Printing Bend at the seam (heat helps), put a…
Anker MagGo SLIM case with UniFi Travel Router. Easy case so you can travel with both at the same time.
Print with PEG/ABS or other outdoor appropriate material. Best to use the like color of the fruit you're trying to protect. After printing, coat the outside of the trap with Tangle Foot or other insect tacky coating, and hang multiple in…
Ein Deckel für die Maden Dose von einem Angelgeschäft dessen Namen ich hier nicht nennen werde. Dieser Ring sorgt dafür das die maden nicht raus können. Sinnvoll wenn man die maden mit einer flüssigkeit benetzt. Ich benutzt es wenn ich…
I didn't like the apple maggot traps I found, so I designed my own. Designed to print with no supports and with minimal material. Print with ABS or PETG, obviously. I use a bright red colored filament for use in my apple trees, and they…
