Liczymy pasujące modele…
Count stopper for KJ-8310C mahjong table. Printed in PETG with 0.4 mm nozzle and 0.2 mm layer height. Super glue a 10 mm x 2 mm magnet in there.Tap the larger hole with a M4 tap.
Tenbou sticks used for Riichi Mahjong These Tenbou Sticks are designed to be printed on single color printers, they are slightly flat on both sides for easier printing. Pick your own colors, here's my selection and how many of each to…
A riichi mahjong compass suitable for use the larger, Chinese, mahjong tiles
This is the design of Dany Sánchez , but I added the Arabic and Chinese numbers, since my play-mates sometimes cannot remember which wind is which number. To get nice contrast between the characters and the base of the token, you can…
We play Mahjong every Saturday, or should I say we are learning. This model is a rack I designed and printed which can be used to hold the tiles, melds and to build the wall. The black line is just a color change to allow players to fit…
I made several mahjong tiles to be keychains for a present. Because I do not a multicolor printer I wanted them to be able to be printed in different colors using filament layer changes. I made 6 different tiles. 1. Red Dragon Tile 2.…
Mahjong D4 (four-sided) dice with the 4 winds. Only one character is correctly oriented at a time, so you can tell which wind is “up”. Two versions are available: pointy or rounded edges. Update: Included support to hold the current wind…
Indique également les saisons et fleurs associées --------------------------------------------------------------------- Also indicates seasons and associated flowers
🀄 🌬 Sometimes when playing Mahjong , the traditional Chinese tile board game, players need a token or marker to remember which Wind corresponds to them during that game. This design is friendly to non-Chinese speakers, as each tile is…
A compass for Riichi Mahjong with cursive or AMOS modern font and wall break number indicator. To print the compass in multicolor, change color for the top 2 layers assuming you are using 0.2mm layer height
Bevel gear for KJ-8310C automatic mahjong table. Made for a friends table whose gears broke. Printed in PETG with 0.4 mm nozzle and 0.2 mm layer height. Tap the larger hole with a M4 tap.
Needed something for my Mahjong set but could not find anything I like. Category: Dice
This is a tile rack for Mahjong . It fits tiles that are up to 33 x 44 x 23 mm. The rack is printed in parts that are connected using joints. I printed it with the short edge on the print surface, then it doesn't need any supports.…
Tenbou sticks used for Riichi Mahjong These Tenbou Sticks are designed to be printed on single color printers, they are slightly flat on both sides for easier printing. Pick your own colors, here's my selection and how many of each to…
Made to be compatible with my Mahjong compass: Works fine without color changing but a multicolor print will definitely look better
Made to perfectly fit 6 28mm mahjong tiles on each side, works well for Riichi and Hong Kong Mahjong. Made to be compatible with my Tenbou Sticks: https://www.printables.com/model/1660675-mahjong-tenbou-sticks-single-color and my Wind…
Helps focus a standard Mahjong card on one line. Fits perfectly so that card can slide up and down
This Cameramount allows 4 iPhones to be lined up on 4 sides in order to project a Mahjong player on Stream like YouTube Live. You can be creative in how you place and compose your camera. ■You need… W1/4 Hexa Screw × 5 W1/4 Hexa nut × 5…
A 3D-printable Mahjong Wind Indicator (Mahjong Bettor) Die is a 18mm cube that fit easily in the holder with 18.35mm cubic cut out. Store it with logo or flat bottom Printing Recommendations Material: PLA Infill: 100 % Supports: No Notes…
I created this for my wifes 160 piece American Mahjong set that I bought her for her birthday. I currently have it setup with only pressure fit pins but you may want to use glue in addition to the pins. You need 4 body pins, the body…
Mahjong Garden Gnome Bring a little luck, strategy, and playful charm to your collection with this Mahjong Garden Gnome ! Featuring a cheerful bearded gnome holding a large Mahjong tile, the model is decorated with sculpted tile symbols…
Mahjong Fairy House 🀄✨ Bring a little luck and magic to your miniature world with the Mahjong Fairy House ! Inspired by classic Mahjong tiles and traditional East Asian architecture, this charming cottage features a sweeping tiled roof,…
A dealer marker is used throughout the game to either indicate the current dealer, or the initial dealer. In the case of the latter, the dice are used to indicate the current dealer, as it gets passed around from one dealer to the next.…
I used PrusaSlicer to paint on a different filament. gcode files use extruder 1 as main color and extruder 2 as accent (border and character). Colors in photo: East: Prusament Opal Green, Made for Prusa Pearl White South: Made for Prusa…
I printed these face down in two parts using the filament swap method. The details of the characters are quite small, you may need to print it larger or increase the layer thickness or flow rate to get it to stick. Drop the disc file and…
This year's christmas present for my mom. Thought I'd share it with you. A standard set of 144 Mahjong tiles. The case measures roughly 180x155mm (without the hinges and therefore should hopefully also be printable on the Prusa MINI). The…
A friend asked me to print something to fill the empty space in his Mahjong case. The .scad file can be modified to change the size of the tile “units” as well as the length/width of the spacer in tiles.
Customized version of http://www.thingiverse.com/thing:434613 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=434613 FB: https://www.facebook.com/3DPPark/ MV：…
As I recently got into playing Mahjong and did not have tile holders yet for my set I decided to design my own tile holders that fit my needs. It has a width of 510 mm when assembled . The individual pieces have a width of 170mm . The…
A riichi mahjong compass suitable for use the larger, Chinese, mahjong tiles
Tenbou sticks for riichi mahjong. They're meant to be printed up-right (vertically) to preserve the cylindrical shape. You should be able to print as-is, but a brim may be necessary if you have issues with bed adhesion.
Mahjong rack. Only fits 30x23x11mm tiles. Prints in 2 halves with hex pins on an Ender 3. Included the full model should you have a ridiculously oversized printer or just want to scale it down. <3
You can easily resize it in Prusaslicer to whatever dimensions you like. I made this in blender, so dimensions won't be right anyhow. Add a color change pretty low in the model to get the classic mahjong split color tile effect. Goes…
I have often come across this 2 player game on Tiktok or Instagram where 2 players have a battle with Mahjong tiles to see who completes their playing field first. Since I didn't want to spend €70 or more on the stones, I thought I'd just…
Mahjong tile rack with rows for hidden and revealed tiles. Fits 20x14x10mm tiles Use the dovetail feature in prusaslicer (cut tool)
This was a commisioned design for my father who asked me, if I could print him some wind indicators he wanted to give away as presents. As I am not playing Mahjongg, I cannot further explain the use of this. The cube can be inserted into…
I downloaded mahjong tiles from https://www.thingiverse.com/thing:4967487 This ruler is made for 30* 22 * 11 mm size mahjong tiles. One for 13 tiles game and one for 16 tiles game. 麻將牌尺，分別做了適合13張及16張的，可折疊，適合30*22*11mm大小的牌
I recommend printing them with the icons towards the plate of the printer, to save color and make them look a little more nice. Scale by 50% for the travel version.
Compass for riichi mahjong. Slot is for standard scoring sticks (65 x 7 x 4 mm). Tiles on the picture are AMOS 28 mm (28 x 21 x 16.5 mm). You can make compass bigger or smaller depending on tiles you are using. Compass size is 130 x 130 x…
