42 modeli
RC1 Buttstock Decal ‘RC1’ is in a bold Asul font; the rest in Gidolinya . The smaller size of the other letters turned out terribly difficult to work with, so I ended up using only the 'RC1‘ part. Reeder Handguard Label The ‘Reeder’ label…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
PLA 0.2mm. Numbers were printed without top and bottom layers with 25% honeycomb infill. UPDATE - 01.02.2023. 1. Following suggestions of Chiefton I added "0" and additional base for two digit numbers. 2. Original base is now 0.2mm higher.
Airsoft replica of Simonov rifle. Gun using v7/m14 gearbox with modified ar15 style hop unit. My attempt was once again to make this replica realistick as possible . Gun has real Type 56 and SKS 45 markings and features. Also model is…
oven knob for samsung oven
Overview I saw the original centering gauge by Chris (Aero)Engineering Design and I loved it! I was particularly impressed with being able to draw a line of a certain length from the edge of a block. However, living in the US makes the…
Added cup markings to the Super Scooper² to make it easier to tell how much food was being scooped
Couple of ideas for marking your luggage for easy identification. A name tag that simply says "This is not your bag" . Hopefully keeps others away from your bag at the airport. This should be printed in two colors, and changing filament…
Simple remix of the Voron Skirt USB Insert with the markings removed for a clean look.
I was really excited to print the Articulated Spider by @soozafone especially when I saw the Black Widow Remix by @Depep1 . However, when I went to look up black window images for comparison, I learned the markings are actually on the…
Fits Airsoft GBB/AEG and maybe real steel. this is my first time making 3D prints, please leave comments and makes to let me know where to improve.
Recently I was in need to mark my WAGO terminal blocks, but I didn't want to buy WAGO's markers because it requires a special printer and can be bought only as a quite large coil. This is not the exact copy of WAGO's WMB marking as the…
The centerfinder features holes to guide your pencil to mark at ½, ⅓ or ¼ of the board/profile. It‘s available in 6 sizes: 50, 75, 100, 125, 150 and 200mm. The pegs each have a pocket to fit an 8x3mm magnet to hang them on the side of a…
Symmetric beefy front idlers for v2.4. Simple remix of Tetsu's symmetric idlers, all I did was add skew markings and optional comic sans. Thanks to Hector at Fabreeko for the numbering suggestion.
On typical horizontally-opposed aircraft engines, following this rotation pattern will swap plugs from top to bottom, short lead to long lead, and reverse the spark plug polarity.…
I didn't want to mark this as an original because I found something very similar, and I guess we independently designed nearly the same thing with similar dimensions by accident, but I can't find the model for the life of me. I designed…
I remixed Matt Arlauckas' Tap and Die Case lids to label the content of each of my 2 sets, SAE and Metric Taps and Dies. I did not modify the tray even though I have included it's .stl file. There are 2 versions of the lid, SAE and…
(2) - Cup Grain/Feed Scoop with Markings. (1) Cup and (2) Cup markings inside. I printed this without supports, be advised there is one small bridging area inside the handle. If your printer is calibrated well with bridging it won't be an…
Introduction The right angled ruler allows for not only straight and 90° lines, but it also comes with a 45° slope, making it a versitile tool with many applications. With the availability of two different ruler lengths (10cm and 15cm),…
I needed a square and thought adding a center finder to it and degree markings would be nice. You can use the degree marks as you would on a protractor. Also, since they are degree markings and NOT distance measurements, you can scale…
What is says in the summary
Saw Jangos 2.4 remix and decided to adapt them for the Trident.
Just added little indicators to easily differentiate between the models
just like the orignal, its a 2x3x6 gridfinity holder for quinn brand 12point sockets on a 3/8 drive ratchet. im happy i was able to find the orignal but i have both the metric set and imperial set and watned them to be nicely seperated in…
This is a one of a kind Sith saber that was forged in my mind. are you man/woman/child enough to wield this beauty :)
Holds all coins from 5 cents onwards. Remixed from https://www.thingiverse.com/thing:441079/files
I just changed the markings Versions for Polish language: PL PP - Prawy Przód PT - Prawy Tył LP - Lewy Przód LT - Lewy Tył
This model is featured in figure 1.19 of Visualizing Mathematics with 3D Printing . See also Solid comma symmetry spheres . Category: Math
Added MMU compatible markings for open and close positions.
Ruler for road markings in 1/43 scale. Contains scaled squares with side sizes of: 0.125 m 0.250 m 0.5 m 1 m and came in two variants - 3 m and 4 m length It's suitable for Czech road markings as: width of line between lanes = 0.125 m…
Print in PETG and choose the one-colour or two-colour model.
A 3D-printable replica of a classic marine radio room clock , featuring the traditional red and green radio-silence sectors, 12-hour and 24-hour markings, an integrated quartz movement holder, and a rear keyhole wall mount. The clock is…
Filament Marker for Velcro UPDATE V3 with TPU and Nozzle Sizes Ideal for Printer, Dryer / Drybox / Shelf Markings MULTICOLOR Printed with Flashforge AD5X RED: PLA BLUE: TPU GREEN: PETG BLACK: ABS Ideal Size for standard velcro rolls. feel…
The original model used recessed markings that weren't thick enough to look good when I printed them, and the individual keys were only combined into complete caps in a 3MF file that contained everything. This remix changes the keycaps to…
I use both right hand polarized an left hand polarized Skew-Planars to fly with. So with the original design the antennas would need making up to identify their polarization. I simply added an "R" and a "L" to the covers so I could…
Just a simple but effective design for a vinyl clock, it has a natural spring to it, which holds it to the vinyl itself, but you can use some Blu-Tack adhesive putty on the back of the vinyl if needed.
This is a DXF file for a scale a friend asked me to make for his grandkids. There is really nothing special to it. You can either print with a wide border like in the picture leaving room to personalize with a name or message. Or simply…
Device for Applying Markings on Ground, Grass, Asphalt, and Other Surfaces The device is a mobile granular-material applicator that operates on the principle of gravity-fed dispensing through a grooved metering roller. As the wheels roll,…
Symmetric beefy front idlers for v2.4. Simple remix of Tetsu's symmetric idlers, all I did was add skew markings and optional comic sans. Thanks to Hector at Fabreeko for the numbering suggestion.
My attempt was to make this M79 model realistic as possible so you could used it for Vietnam war events or as just a nice pice to your collection. Model has realistic manufacturer markings and imitation of the cocking mechanism under the…
Airsoft replica of Simonov rifle. Gun using v7/m14 gearbox with modified ar15 style hop unit. My attempt was once again to make this replica realistick as possible so there is gonna be some hand modifications need while assembling the…
Just a simple but effective design for a vinyl clock, it has a natural spring to it, which holds it to the vinyl itself, but you can use some Blu-Tack adhesive putty on the back of the vinyl if needed.
![[REMIX] Self Centering Gauge (Inch Markings)](https://media.printables.com/media/prints/434633/images/3596966_9323a97a-251a-407f-a685-42cca411472b/centering-gauge-01.jpg)
