Liczymy pasujące modele…
Originally published here on Thingiverse . This was made with MATLAB R2016a in a similar way that of other astronomical bodies, plotting a topographical map on a spherical projection. I could not find a good, detailed and free…
Originally published here: Earth with exaggerated topography scaled one in sixty million by tato_713 - Thingiverse These models were made using MATLAB R2016a with a topographical map of the Earth, including the seafloor. Like other models…
Originally published here: Saturn scaled one in 500 million by tato_713 - Thingiverse Everyone's favourite planet. This model was made using MATLAB R2016a on a global map of the planet made by Bjorn Jonsson, with the contrast enhanced,…
Originally published here: Mars with exaggerated topography scaled one in sixty million by tato_713 - Thingiverse This model was made using the latest MOLA data processed with MATLAB R2020a. Like most of my topographical models its relief…
Originally published here: Mercury with exaggerated topography scaled one in sixty million by tato_713 - Thingiverse This model was made using MATLAB R2016a with the data from the MESSENGER mission available in the USGS site. The relief…
Originally published here: Uranus scaled one in 250 million by tato_713 - Thingiverse Similar to my post of Neptune , this model of Uranus does not represent a topography because it has not a solid surface. Instead of that, the model…
Originally published here: Luna with exaggerated topography scaled one in twenty million by tato_713 - Thingiverse This model is made using the most up to date topographic map from the NASA site, from the latest MOLA data. The topography…
Originally published here: Venus with known topography scaled one in sixty million by tato_713 - Thingiverse This model was made using MATLAB R2016a with the data from the Magellan mission available in the USGS site. The original map has…
I remixed the great model from tato_713 to have a secret compartment. The two halves are secured together via a short thread with a snap-fit.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Originally published here: Neptune scaled one in 250 million by tato_713 - Thingiverse This model was made using the contrast enhanced mosaics made by Bjorn Jonsson from the data of the Voyager 2 probe. The "relief" of the model is…
Originally published here: Pluto and Charon with known topography scaled one in ten million by tato_713 - Thingiverse This model is made using MATLAB R2016a on the topography map from the USGS Astrogeology Science Center site, from the…
Resin Slicer used in the 1st photo is Lychee Please consider joining my Patreon to access more models like this! Patreon: https://patreon.com/MinWin3D TikTok: https://www.tiktok.com/@minwin3d Twitter: https://twitter.com/MinWin3D YouTube:…
Originally published here: Flat Earth scaled one in 250 million by tato_713 - Thingiverse These models were made using MATLAB R2016a to make different projections of an Earth's topographical maps, in order to illustrate how the…
Originally published here: Arrakis scaled one in sixty million by tato_713 - Thingiverse This post is based on this official map of Arrakis (suggested by the user Joy Cohn ), from the Frank Herbert's Dune saga. I created my own hand…
Originally published here: 4 Vesta scaled one in ten million by tato_713 - Thingiverse This model is made by myself using MATLAB R2016a on the height map of the USGS site from the Dawn mission. On this scale the Moon is a basketball and…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Originally published here: Starkiller Base scaled one in ten million by tato_713 - Thingiverse The new version of the Death Star ; an unnamed, Pokeball shaped "planet" covered by snow, decorated with mountains, and wrapped in a Earth like…
Originally published here: 1 Ceres scaled one in ten million by tato_713 - Thingiverse This model is made by myself using MATLAB R2016a using the IQC model made by Park, R.S. and Buccino, from the data of the Dawn mission. It's scaled to…
Originally published here: Europa with approximate topography scaled one in twenty million by tato_713 - Thingiverse This model was made with MATLAB r2016a with the map from the JPL Solar System Simulator. I'm not sure if this map is a…
Originally published here: Io with known topography scaled one in twenty million by tato_713 - Thingiverse This model was made using MATLAB R2016a on the DEM (digital elevation map) of Io from White et al (2014). Like with many of the…
Originally published here: Titan with exaggerated topography scaled one in sixty million by tato_713 - Thingiverse This model was made using MATLAB R2016a on the DEM (digital elevation map) of Titan from Corlies et al (2017). Like with…
Originally published here: Haumea, Namaka and Hiʻiaka shape scaled one in ten million by tato_713 - Thingiverse This model was made using the length of the axis of the ellipsoid estimated from Dunham (2019). It's scaled to 1 in 10^7 or…
Originally published here: Earth from 540 to 20 Mya scaled one in sixty million by tato_713 - Thingiverse The idea of this post was suggested by Sebastian Steinig . I plotted the geography of the Earth several past ages, from the…
Made to accept countersunk screws. The model is already in the preferred printing orientation, in which it does not require supports. I've included the Fusion 360 .f3d file if you want to modify it. The model is offset from the origin…
Originally published here: 21 Lutetia scaled one in two million by tato_713 - Thingiverse This model was rendered using MATLAB R2016a on the ICQ model of the NASA PDS site made from the data of the Rosetta mission. The file's names…
Originally published here: 243 Ida scaled one in one million by tato_713 - Thingiverse This model was rendered using MATLAB R2016a on the ICQ model of the PSI made by Peter Thomas from the data of the Galileo mission. The file's names…
Originally published here: Planet Nine scaled one in 250 million by tato_713 - Thingiverse This is a representation of how it could be in size the hypothetical planet beyond Neptune, proposed by many astronomers, nicknamed "Planet Nine".…
Originally published here: Largest TNOs and their moons shapes scaled one in ten million by tato_713 - Thingiverse This could looks like a lazy post. The idea of this was to make scaled models of the biggest Trans Neptune Objects that are…
This model was rendered using MATLAB R2016a on the ICQ model of the PSI made by Robert Gaskell from the data of the Cassini mission. It's scaled to 1 in 107 or one in ten million. This model is about 4 cm in diameter. On this scale the…
Originally published here: Enceladus with known topography scaled one in ten million by tato_713 - Thingiverse This model is made by myself using MATLAB R2016a on the incomplete map from Schenk (2009) filled with the low resolution map…
Do you want to get your 5 million watch hours reward earlier? Plaque is press fit I printed the model right way up, but its probably quicker to print it upside down. Right way up, and upside down gcodes are with support
This model was updated using the topographic map present on Steinbrügge (2019), exaggerated 30 times, since Ganymede topography is really flat. It was rendered using MATLAB R2016a. The file's names explained: name_1_x_10_y.stl is 1 : x*…
a 3d printable youtube 1 million subscriber play button
Originally published here: Iapetus with known topography scaled one in ten million by tato_713 - Thingiverse This model is made by myself using MATLAB R2016a on the topography map from the blog of Dr. Paul Schenk. The original map has the…
Originally published here: Amalthea scaled one in four million by tato_713 - Thingiverse This model was rendered using MATLAB R2016a on the ICQ model of the PSI made by Philip Stooke from the data of the Galileo and Voyager missions. The…
Originally published here: Rhea with known topography scaled one in ten million by tato_713 - Thingiverse This model is made by myself using MATLAB R2016a and Paint.net on the topography map from the blog of Dr. Paul Schenk. The original…
Originally published here: https://www.thingiverse.com/thing:5828226 This is my model of the planet Tatooine from the Star Wars saga. It's a dessert planet, and the birth planet of Luke Skywalker. There is no official world map of the…
Originally published here: 2 Pallas scaled one in ten million by tato_713 - Thingiverse I did not render this model, I just soften and simplified to look less "poly", using the model available in the DAMIT website. The model has no…
Originally published here: Triton with known topography scaled one in twenty million by tato_713 - Thingiverse This model was rendered using MATLAB R2016a on topographic map from Schenk (2008), made with the images from the Voyager…
Originally published here: Miranda with known topography scaled one in ten million by tato_713 - Thingiverse This is based on the topography map from the Dr. Schenk's blog, rendered with MATLAB R2016a. When the Voyager 2 probe flew by the…
Originally published here: Tethys scaled one in ten million by tato_713 - Thingiverse This model was rendered using MATLAB R2016a on the ICQ model of the PSI made by Robert Gaskell from the data of the Cassini mission. It's scaled to 1 in…
Originally published here: Dione scaled one in ten million by tato_713 - Thingiverse This model was rendered using MATLAB R2016a on the ICQ model of the PSI made by Robert Gaskell from the data of the Cassini mission. It's scaled to 1 in…
Originally published here: Pern scaled one in sixty million by tato_713 - Thingiverse This model was made using MATLAB R2016a using a fan-made topographical map. Pern is the planet where the Anne McCaffrey saga Dragonriders of Pern take…
Originally published here: 216 Kleopatra scaled one in four million by tato_713 - Thingiverse I did not render this model, I just resize, soften and simplified it Windows 3D Builder to share the same scale as other objects. The original…
Originally published here: Callisto with known topography scaled one in sixty million by tato_713 - Thingiverse This model is based on the global digital elevation map (DEM) of the MIIGAiK Extraterrestrial Laboratory (MExLab) Geoportal…
This model was made using MATLAB R2016a combining the south hemisphere from Shepard (2017), based on the radar images; and the north hemisphere from Viikinkoski (2018), based on direct images; both models available in the 3D Asteroid…
I made this model mixing the stereographic model from the south face of Arrokoth from the supplementary material of Spencer (2020) and the shape model from Stern (2019) published in the 3D Asteroid catalogue, using MATLAB R2016a. The New…
Originally published here: 90 Antiope approximate shape scaled one in two million by tato_713 - Thingiverse This model was made using the data from Bartczak (2014), I just resize, soften and simplified the models using Windows 3D Builder…
Originally published here: Exoplanets scaled one in 120 million by tato_713 - Thingiverse The concept of this post is to compare the size in the same scale of various Earth sized exoplanets with the Earth itself or other astronomical…
Originally published here: Ariel with known topography scaled one in ten million by tato_713 - Thingiverse This model was rendered using MATLAB R2016a on topographic map from Schenk (2008), made with the images from the Voyager mission.…
Originally published here: Phoebe scaled one in four million by tato_713 - Thingiverse This model was rendered using MATLAB R2016a on the ICQ model of the PSI made by Robert Gaskell from the data of the Cassini mission. It's scaled to 1…
Originally published here: Luna 4 billion years ago scaled one in twenty million by tato_713 - Thingiverse This is an hypothetical representation of how could look the Moon during or shortly before the Late Heavy Bombardment. It was…
Originally published here: 3 Juno scaled one in four million by tato_713 - Thingiverse I did not render this model, I just softened and simplified to look less "poly", using the model available in the 3d Asteroid Catalogue site. The…
Originally published here: Proteus scaled one in ten million by tato_713 - Thingiverse This model was rendered using MATLAB R2016a on the ICQ model of the PSI made by Philip Stooke from the data of the Voyager missions. The original model…
Originally published here: Titania with approximate topography scaled one in ten million by tato_713 - Thingiverse Not to be confused with the moon of Saturn Titan . This model is not based on a topographical map, there is not enough good…
Originally published here: Hyperion scaled one in four million by tato_713 - Thingiverse This model was rendered using MATLAB R2016a on the ICQ model of the PSI made from the data of the Cassini mission. The file's names explained:…
Originally published here: Oberon with approximate topography scaled one in ten million by tato_713 - Thingiverse This model is not based on a topographical map, there is not enough good images to make one, this is based on a high…
Originally published here: Gem Homeworld scaled one in 120 million by tato_713 - Thingiverse This is an interpretation of how it could looks like the homeworld of the Gem race in Steven Universe show, usually referred as "Homeworld" or…
Originally published here: Larissa scaled one in four million by tato_713 - Thingiverse This model was rendered using MATLAB R2016a on the ICQ model of the PSI made by Philip Stooke from the data of the Voyager missions. The original…
Originally published here: 253 Mathilde with known topography scaled one in one million by tato_713 - Thingiverse This model was rendered using MATLAB R2016a on the ICQ model of the PSI made by Philip Stooke from the data of the NEAR…
Originally published here: Umbriel with approximate topography scaled one in ten million by tato_713 - Thingiverse This model is not based on a topographical map, there is not enough good images to make one, this is based on a high…
Originally published here: 130 Elektra scaled one in four million by tato_713 - Thingiverse I did not render this model, I just softened and simplified the non-convex model available in the 3D Asteroid Catalogue site, where it is…
Originally published here: Wheel of Time Earth scaled one in sixty million by tato_713 - Thingiverse This post was requested by Robert Jacobs . This is a model of the world of The Wheel of Time novel serie, by Robert Jordan, nicknamed by…
Originally published here: Eternia scaled one in sixty million by tato_713 - Thingiverse This is the planet of the Masters of the Universe series, including He-Man and She-Ra . I decided to do this after the announcement of the upcoming…
Originally published here: Mars 1962 reconstruction scaled one in sixty million by tato_713 - Thingiverse This is a recreation of what the scientists though it was Mars before the first missions arrived to it, the Mariners. The model was…
Originally published here: Nirn, Secunda and Masser scaled one in sixty million by tato_713 - Thingiverse These models were made with MATLAB R2016a from the data and observations of the fifth mainline game of the saga The Elders Scrolls…
Originally published here: Janus and Epimetheus scaled one in four million by tato_713 - Thingiverse These models were rendered using MATLAB R2016a on the ICQ models of the PSI made from the data of the Cassini mission. The file's names…
Originally published here: Helene scaled one in one million by tato_713 - Thingiverse These models were rendered using MATLAB R2016a on the ICQ models of the PSI made from the data of the Cassini mission. The file's names explained:…
Just a 3 d fractal testing if it can be 3d printed. obj files included for meshlab.
Originally published here: Prometheus and Pandora scaled one in two million by tato_713 - Thingiverse These models were rendered using MATLAB R2016a on the ICQ models of the PSI made from the data of the Cassini mission. The file's names…
Originally published here: 10199 Chariklo shape scaled one in four million by tato_713 - Thingiverse This model was made using Microsoft 3D Builder from a medium resolution sphere changing its diameters following the work of Leiva (2017).…
It is designed to be fully 3D printed with minimal hardware required, making it a highly accessible build that visually breaks down complex mechanical engineering. It includes a custom base to display the final assembly while it runs.…
Originally published here: Mesklin scaled one in 500 million by tato_713 - Thingiverse The whirling world. This is the scaled model of the planet where it takes place Mission of Gravity by Hal Clement, a hard science fiction short novel.…
Originally published here: Cygnus X-1 accretion disk scaled one in ten million by tato_713 - Thingiverse This is a representation of how it would look like the nearest region around the hypothetical, mostly agreed to be, Cygnus X-1 black…
Originally published here: Red Moon scaled one in sixty million by tato_713 - Thingiverse This is my interpretation of the Red Moon where it takes place Manifold: Origin , a hard science fiction novel full of gore, by Stephen Baxter. It…
Model Boudy je složen ze dvou dílů – Boudy a Střechy s pokladničkovým otvorem. Oba díly lze tisknout bez podpor s možností dodatečně díl Boudy dobarvit. Zároveň lze na štít nalepit samolepku s nápisem Mary's Meals. BOUDA - tisknout v bílé…
Youtube demo video: https://youtu.be/A-4PnGTBvqo Youtube build video: https://youtu.be/IYNmUCdP02I Youtube video about the remote I used: https://youtu.be/VOsjm5y2jQQ This thing is my remote controlled "Death Probe" from the 70s TV show…
A fun Rebus-style keychain to give to a friend, girlfriend/boyfriend, or anyone else.
The task is simple: Fill a 45x45 square with 1 piece of size 1x1, 2 pieces of size 2x2, 3 pieces of size 3x3 and so on up to 9 pieces 9x9. There are 1,730,280 solutions to it! After watching Matt Parker's great video on the topic, I just…
Originally published here: Centaurworld scaled on in sixty million by tato_713 - Thingiverse The planet of the homonymous Netflix cartoon (Centaurworld), this was based on the intro animation, and the space view from fourth episode. I…
Originally published here: Cube planet scaled one in sixty million by tato_713 - Thingiverse This is a simulation of how would the water and other fluids distribute on a cube of the same volume and density as Earth. The simulation and…
Disclaimer | This is a design inspired by the 3D printable badges you can earn on Printables. I remade the entire model from scratch (except for pieces d, e, f, g) using the measurements from the current models. This is considered a…
This was a thought I had! 1 Star would have Millions upon Millions of stories. So I designed a falling star desperate to tell their stories It comes out nice and smooth Category: Sculptures
Originally published here: Rocheworld scaled one in twenty million by tato_713 - Thingiverse This is one of the fictional planets orbiting Barnard's Star in the Robert L. Forward hard sci-fi novel Flight of the Dragonfly ; or Rocheworld…
These spheroids are addons to a 1 in 10,000,000 scale model, all of them being either Trans-Neptunian Objects or Asteroids.
My Best Six Million Dollar Man Plate. Variable layer height also required uses two layers.
The Six Million Dollar Man Head Eye Side View. Dual layer design.
Originally published here: Ghroth scaled one in ten million by tato_713 - Thingiverse This is the first lovecraftian being I've made, and the only one I can, at least, guess its size. Ghroth is not from the hand of H. P. Lovecraft…
The Six Million Dollar Man Logo, Dual Layer with variable layer height base.20mm & text.10mm. ENJOY!
Hi this is a remix of magu's "Machi Koro to Machi Koro: Bright Lights, Big City Conversion Compact (Expansion) Box Insert" found at https://www.thingiverse.com/thing:2401771 I liked housing all my cards into one box, especially the…
Simple remix of this mount for the great FastCap 10 Million Dollar Stick to use with Multiboard. Slight reduction in width of model as there is no need for screw holes.
Just a 3 d fractal testing if it can be 3d printed. obj files included for meshlab.
Simple remix of this mount for the great FastCap 10 Million Dollar Stick to use with Multiboard. Slight reduction in width of model as there is no need for screw holes.
The Six Million Dollar Man - Steve Austin - 1973 3D printable model.
The houses and hotels from the Monopoly Millionaire's Edition, which are often too few or missing. Caution, Choking Hazard.
Mince z knižní série Tetování krví tak jak si ji představuji. Coins from the Monster Blood book series as I imagine it.
