Liczymy pasujące modele…
In order to run NMR samples at work, we need to prep everything in the lab then run the tubes to the other side of the building where the NMR instrument is located. To make our Health and Safety guy happy, I made up a transport case for…
Requested by a grad student inspired by the Romero Lab at UCSD.
Simple stand for 5mm NMR tubes, holds up to 24 tubes. Dimensions: 100x66x100mm Takes about 40g of PLA to print at 10% infil and 1 perimeter. Based on a ramdom STL send from a friend working in a OC Lab, don't know the original creator,…
Parametric septa / sleeve stoppers generator and stl examples for tubes, bottles & NMR tubes. Few samples have been provided too. It contains a table to generate septas from 3 to 35mm in diameter, and the option to create custom septas…
NMR tubes can be fragile things. They almost never break while you're walking from your lab down to the NMR facility, but when they do, you're going to have a bad day. Near-miss paperwork is not fun. Not anymore! These carriers enclose…
Details in picture are colored in simple black sharpie If you like this model, feel free to tip me at https://ko-fi.com/kcthechemist. If not no worries and enjoy!
Description This stand was designed to hold 12 NMR tubes (5 mm diameter) and if turned upside down it can hold a flask. It is useful for round bottom or pear-shaped flask of volumes from 10 to 100 mL. The top part can be used to imprint…
NMR tube holder i use it in the lab to make it more organize. preferred to use PETG but also PLA will be ok.
A "small" organ NMR tube holder. Can be printed without using support material, and with low initial (15%). Unfortunately it doesn't play.... yet.... Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No…
NMR Tube Rack, designed to hold 25 tubes of 5mm, ideal for use in scientific laboratories with nuclear magnetic resonance (NMR) spectrometers. This rack is rotatable, space-efficient (diameter 125mm, height 134mm), and easily customizable…
Microplate 96 NMR Tube Rack V2 - holds 96 x 5 mm NMR tubes, designed to be able to see the tubes and use less filament. Printed with holes in the corners so that it can be fitted with a replaceable and solvent-resistant top-plate (design…
Show your love to NMR with this Matryoshka NMR model
A model designed for use in the laboratory is available here. In NMR reactions, the mixing of the sample is always a problem, if you do not have an extra rotary apparatus. With this model, a rotary evaporator, which can actually be found…
Nuclear magnetic resonance card holder, i created a simple one for my wife for just one type. For this contest i made an upgraded version. The new version is stackable and allows you to put small signs(11x20mm) in there. I also uploaded a…
Microplate 96 NMR Tube Rack - holds 96 x 5 mm NMR tubes. Printed with holes in the corners so that it can be fitted with a replaceable and more solvent-resistant top-plate if required.
The add-on to the evaporator is used when mixing solutions within the NMR tubes. That is for both the mixing solutions for NMR spectra recording but may be used when one aims at washing NMR tubes and does not want to shake the washing…
Each model has the material in it and a descriptive name in the file name, and if more than one is printed, it is at the end of the name. If a file has two materials in the name, the first one is what I would use, the second is another…
Holds 7 standard 5 mm NMR tubes horizontally (tubes will stick out on the right side), and 12 capillaries (roughly 80 mm length) vertically. There is a thin wall in the bottom to prevent the capillaries from falling out. This wall can be…
This was migrated from my Thingiverse profile and is from 2016. This takes standard 5 mm NMR tubes and spins them using a lab compressed air supply. The rotation may not be particularly smooth, although this can probably be improved on if…
A simple NMR tube cutting aid. This was designed to shorten NMR tubes filled under protective gas (to access/retrieve crystals near the bottom). The whole thing fits through a NS29 ground glass connection to maintain the protective…
These two plates enable a Bruker NMR tube rack (model no. Z112273 ) to be compatible with both the deck of an Unchained Labs Junior (allowing the rack to sit snugly in its deck position) and ensuring the top of the NMR rack to sit level,…
This model is a miniature version of a Nuclear Magnetic Spectrometer magnet. These devices are used in chemistry research for analyzing the composition of samples, among others, but are very similar in working principle to MRI machines…
These two plates enable a Bruker NMR tube rack (model no. Z112273 ) to be compatible with both the deck of an Unchained Labs Junior (allowing the rack to sit snugly in its deck position) and ensuring the top of the NMR rack to sit level,…
Update 3 Dec 2023 : uploaded a new version with magnets embedded in the design. Use 9x9x9mm neodymium cubes (the ones they sell on aliexpress 1cm are usually 9mm). Stop the printer mid print for placing the magnets as usual, and do not…
NMR Tube Holder for JAWSChem ( Just Another (Chemistry) Webinar Series ) https://twitter.com/JAWSChem Just print it and enjoy the beauty, no support material needed, nothing fancy for the slicer.
For synthetic chemist. I made an NMR tube holder with 25 slots. Enjoy printing! --------- This model was printed at Medbery Makerspace – The Studio at the University of Tennessee, Knoxville, USA. I would like to thank the Medbery…
An upgraded version of the original 25-slot NMR tube holder , this new design accommodates 50 tubes and includes an anti-slip layer for added stability during use. Perfect for synthetic chemists and lab work! 🛠 Features: Holds 50 standard…
I liked the desing of @TernMaker 50 tubes NMR tube rack V2, but wanted a smaller holder. So I went full circle and remodifed it back to a 25 tube holder, but with all the improvements from v2. I also simplified the model geometry as there…
Halbach Holder for NMR design for 12 pieces Halbach. N35 10x10x10mm magnet. Infill 60% for durable.
NMR tube holder / transport container / secondary container. Holds 29 NMR tubes (5 mm diameter x 7 inch long) with plastic caps. Also accommodates various other types of 5 mm tubes (J. Young tubes, high-pressure, valved tubes, as well as…
Update 3 Dec 2023 : uploaded a new version with magnets embedded in the design. Use 9x9x9mm neodymium cubes (the ones they sell on aliexpress 1cm are usually 9mm). Stop the printer mid print for placing the magnets as usual, and do not…
The holder and its bottom part are printed as separate objects to avoid using supports. Both of them are included in the same *.stl file. After printing glue the parts together.
When you like plants, but NMR is life: A simple pot modelled from an NMR. Just change the size to fit your plant. It prints upside down without any support. Spray coat the inside to make it water tight.
I did originally take the elephant itself from an artist online, but I can't find the original link or file. I added the slots for holding NMR tubes. I also didn't take photos at the time, however I had issues with the trunk on my…
Cover for protection from dust and moisture of the shaft outlet of the worm gear NMRV 050
