Liczymy pasujące modele…
This is my model of the SSV Normandy SR2 from the Mass Effect series. It is the Alliance version from the third game. The model is some 50cm long and is a kit. The pieces are divided per their color. For the assembly, I recommend to watch…
This is my model of the SSV Normandy SR1 from the Mass Effect series. The ship is done in scale with my SR2 . The pieces are divided per their color. For the assembly, I recommend to watch the following video.
Undaunted: Normandy base for miniatures with a hole for tokens
29. Dec. 2023 Improved the hand for easier printing Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 Get your Dummy 13 here: /model/593185 DUMMY 13 loves COMIC CON!…
Public domain model of the Normandy from Mass Effect by JoshuaS . Originally uploaded to Blend Swap .
This model was created based on the cover of “The Design of Everyday Things” by Don Norman. The model stands 167 mm tall (the body being 132 mm tall). I printed both the body and lid at the same time with a detailed layer height and no…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
You can glue two 10 x 1.5 mm round magnets in the base. Print instructions Recommended infill angle: 0° Color changes: White -> Black -> Gold Low speed and high temperature will create a shiny top surface. There are "holes" inside the…
By request: Cerberus logo set for Martin's brilliant Normandy SR2 model. Quick and easy convertion in Thinkercad, took litterally 10 minutes. Please visit user @Martin on printables for the magnificent base model of the Normandy SR2 Files…
UPDATE 2024-08-12: Boy, I've learned a lot about model design since I made these and shared them on Thingiverse originally. Someone may still want them, so I'm sharing them here. At some point, I may make updated versions, just to show…
This is my design for an Undaunted Normandy Insert. Everything fits nicely with room for the rulebooks on top. One caveat with my design is it is designed to hold the unit tokens in the coin cases I purchased, so this is unlikely to work…
This scale model provides a bird’s-eye view of a motte and bailey castle, a design that served as the "starter home" for the Norman aristocracy following the conquest of England in 1066. Combining speed of construction with formidable…
Psycho - Norman Bates - Wouldn't Hurt a Fly - 1960 3D printable model.
An alternate stand for Martin's gorgeous Normandy SR-2 which mounts the ship at a slight angle to show it off better.
Gun emplacement based on the Longues-sur-Mer battery. It is not intended as a scale model, but as a similar casemate site. According to Wikipedia, the guns used at that site were 15 cm TbtsK C/36 naval guns. If so, the gun on this build…
Iconic Movie Moments - Psycho - Norman / Mother Attacks - 1960
This is an organizer for the Undaunted: Normandy + Reinforcements board game. This organizer was designed to store the content of Undaunted: Normandy combined with the Reinforcements expansion (Normandy content only). The unit cards for…
At the original height of 30mm can be printed with 0% infill and no supports. The sturdier version of the file has a closed teapot spout. Let me know if you have ideas to improve the model or print speed. ----- Design of Everyday Things…
Use 4x ¼-20" screws to mount. Included part file in case you want to change the angle more. (Currently offset by 10deg) The ship pushes in snug on the bottom and can comfortably be removed. No glue necessary.
Insert for the board game Undaunted - Normandy and the relevant parts from Undaunted - Reinforcements. This insert fits sleeved cards for Normandy (including the cards from Reinforcements). It also fits the relevant AI cards from…
Mounts to wall and displays model on an angle to show it off more
Hey all, this is my 2nd attempt at a board game insert. This does not fit sleeved cards but with some modification to the file it is completely possible. This holds all the additional parts from Reinforcements for Normandy and maintains a…
Well. It's 1066 and you're looking for something to rest your ale on.
Iconic Movie Villains - Psycho II - Norman Bates - 1983
Print instructions: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Start with Black At layer #6 (0.56mm) swap to Red At layer #9 (0.8mm) swap to Yellow At layer #15 (1.28mm) swap to Jade White for the rest.
2017-05-29 Update: I added a quiver to the first crossbowman and thickened up his ankles, as they seemed a little thin after my first print. I also added a second pose, this one reloading. 2017-05-25 Update: I've now given the crossbowman…
Praga Piccolo v úpravě pro čsl. četnictvo z r. 1929.
Freedom From Want : Norman Rockwell
A prototype collet, 5/8 tool size, with a Van Norman C Taper/Hardinge 5V taper. I based this model off of drawings from Van Norman and the previous work of John Kasunich. Needs refinement, and happy to take feedback. End goal is to get…
The transmission gear of the motor from food processor NORMANN AFP-947 2002
Made entirely by cutting up different models in a slicing software. Absolutely not the most graceful of models. You'll need supports, and I suggest printing in the default orientation to ensure the Skadis pegs and Normandy mount doesn't…
Norman the gnome loves hot co co and especially candy canes welcome this little guy into your home to watch your kids over the holidays merry christmas and happy new year
I created this stand for the Normandy SR2 model created by Martin. Can be painted in match whatever color scheme the ship is.
We have 2 sets of these Normann Design Stackable Tablets (3 each) which we love very much. Unfortunately some of the rubber spacers / bumps got lost during the years and Normann Design was not really willing to sell spare parts … so i…
UPDATE 18.05.2026 - uploaded new versions 1.1 of USA, german and map tiles parts Welcome, insert fits CZ version of the game but should fit ENG version too. Printed with 0,2 layer Enjoy!
NOT TESTED - For Use on Van Norman Milling Machines
Saint Adela of Normandy - Devotional Statue is a religious statue and sacred figure designed as a saint sculpture for respectful display. This devotional sculpture is ideal for display on a shelf, altar, or collection, and also suits…
Adds a cover to the dice and token so they don't rattle around if you don't own the reinforcements expansion.
These are 2 mm thick counter bases and a storage box/lid for Mike Lambo's The Fields of Normandy wargame. These are bases for the orginal counters to the game that can be found here . The numbers after the filename are the number that…
This scale model provides a bird’s-eye view of a motte and bailey castle, a design that served as the "starter home" for the Norman aristocracy following the conquest of England in 1066. Combining speed of construction with formidable…
Inserts / Organizer for Undaunted Normandy by am-media.biz 🎺 **FEATURES** 🎺 This is a 3D printable inserts for the board game Undaunted Normandy, designed to organise ALL the components of the base game inside the original box. Thanks to…
25 cm tall bust of Sam Strand Porter Bridges from the video game Death Stranding. This design includes the following STLs: -Bust -Base Printing parameters are listed below. Thanks for stopping by :) Model for personal use only. NO…
Exclusive model version with no MT logo.
Exclusive model version with no MT logo.
The Britten-Norman BN-2 Islander is a British light utility aircraft and regional airliner designed and originally manufactured by Britten-Norman of the United Kingdom. Still in production, the Islander is one of the best-selling…
Places Art - Mont-Saint-Michel in Normandy, France 3D printable model.
