11 modeli
**Update 2-Mar-2023:** Added 1" barrel NP5K Files. **Update 12-Jan-2023:** Added Gryphon 1.3 compatible files for solenoid and manual, which should be easier to assemble. Also added select-fire wiring diagram. This will likely be the…
A couple of years ago I bought an np5 gryphon secondhand, and wanted to design something to make mine a little different from the other ones out there. 2 years later and I finally got around to doing it! The NP5SD replaces several parts…
I made this part because the screen and select fire switch are only required for the solenoid version of the NP5 gryphon and there were no part variants that did not include spaces for these unnecessary parts. THIS IS FOR THE MANUAL…
This case perfectly fit Jetway's NP591 or NP691 single board computers. It uses NP591's original heatsink as the top lid, needs 4 M3*5mm flat head screws to mount the case to the heatsink. Recommend using PLA if worried about warping…
Replaces the "Right Mech Cover" and "Left Mech Cover". They don't sit flush with the grip otherwise.
These pins will help keep the stock in place, with some tight-ish fitting.
A couple of years ago I bought an np5 gryphon secondhand, and wanted to design something to make mine a little different from the other ones out there. 2 years later and I finally got around to doing it! The NP5SD replaces several parts…
Replaces the "Right Mech Cover" and "Left Mech Cover". They don't sit flush with the grip otherwise.
While you can friction-fit this (it's very tight!), I would recommend supergluing it in place, otherwise the handle has a habit of twisting in place, making for a very unsatisfying NP5 slap because the handle was at an odd angle. Should…
My fixed stock was too loose, so I decided to remake them with tighter tolerances and a hole to stick a pin through.
These pins will help keep the stock in place, with some tight-ish fitting.
