P
PrintablestenLipa
Oclean Air 2 - double stand
Made it support two Oclean Air 2 toothbrushes
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 0
Wyniki wyszukiwania: oclean
Liczymy pasujące modele…
P
Printables
Stand for pool autocleaner - Poolroboter station
With this model, you can give your pool autocleaner a "home" and charge him without water dropping onto your floor. To do this, simply place a towel underneath. Settings: PETG/ABS 15% infill no supports Scale it to the actuel size oy your…
P
Printables
Xiaomi OcleanX simple wall mount
I created this because I couldn't find a simple wall mount for my Xiaomi Oclean X toothbrush. After printing stick a double-faced adhesive tape (I used 3m tape) at the back and put it to the wall where you want it to be. Snaps to the…
P
Printables
intex autocleaner hose to skimmer adapter
Printed in PETG with 25% infill , no supports needed I added groove to put O-Ring from original adapter to seal the connection on hose side - see pictures
P
Printables
TOOTHBRUSH HOLDER FOR XIAOMI OCLEAN
Simple stand for Xiaomi OClean toothbrushes. Print using a 0.2mm layer height, 20% gyroid infill, 3 perimeters, and 0.8mm top and bottom layers. Use the Split tool to separate the holder and bottom pads.
P
Printables
HMS Woldoclean Superglue Plastic
Sekundenkleber für Kunststoff 25g - wasserfest, hitzebeständig & mit Nadel Verschluss
P
Printables
Oclean Air 2 Electric Toothbrush Holder
A convenient wall-mounted holder/stand for the Oclean Air 2 toothbrush. It has small holes in the bottom for water drainage. The back has a smal 0,5mm recess for the double sided tape to sit in. This makes the holder sit flush with the…
P
Printables
Shark Vertex Pro Duoclean Powerfins Attachment Holder
Keep your Shark Vertex Pro Duoclean Powerfins vacuum cleaner tool tip attachments close at hand and upright with this bin! Your vacuum attachments securely clip in using their built in latching mechanism. Bonus Gridfinity Refined version…
P
Printables
Stand for pool autocleaner - Poolroboter station
With this model, you can give your pool autocleaner a "home" and charge him without water dropping onto your floor. To do this, simply place a towel underneath. Settings: PETG/ABS 15% infill no supports Scale it to the actuel size oy your…
P
Printables
Tefal Oleoclean FR8040 Timer Dummy
Bei unserem Timer ist die Scheibe kaputt gegangen. Da wir den Timer nie benutzt haben und auch nicht benötigen, habe ich einen Dummy zum Verschließen des Lochs gemacht um das System wieder dicht zu bekommen. Gedruckt wurde mit dem Prusa…
P
Printables
Oclean elite ulstrasonic tooth brush tray organizer
Oclean elite ulstrasonic tooth brush tray Stand for tooth brush + two spare end tips Simple design and print Main hole - fi 27mm Spare holes - 2 x fi 15 Height - 40mm No supports, infil 5-15% If You are glad with my work You can buy me…
P
Printables
Oclean Endurance electric toothbrush stand
This is a compact stand designed for the Oclean Endurance electric toothbrush. It keeps the toothbrush upright and stable on any flat surface like a countertop or shelf. Prints quickly and consumes low filament. Dimensions: Stand width:…
P
Printables
SoClean Cpap reservoir plug with vent tube
a plug to an after market reservoir with a 27-28mm filler plug. a 7mm passthrough to accommodate the vent tube that would otherwise attach. the plug needs to maintain a pressure level while holding the vent tube securely. normally the…
P
Printables
TEFAL Oleoclean Pro Fryer
This is a replacement rotary knob for the Tefal Oleoclean deep fryer for setting the temperature.
P
Printables
Oclean X Charge Plug based on Original Charger
This is a custom-designed wall-mounted charging dock specifically created for the Oclean X electric toothbrush. The dock transforms the original magnetic charging puck into a convenient, space-saving wall solution that keeps your…
P
Printables
Oclean X (Pro/Ultra/Kids) Electric Toothbrush Stand with No-Touch Head Removal
This is a 3D-printed stand/holder designed specifically for the Oclean X series electric toothbrush (compatible with Pro, Ultra, and Kids models). It neatly stores the main unit and two brush heads . Key Features: No-Touch Brush Head…
P
Printables
OttoClean – Smart Vacuum Upgrade for Otto Robot
This 3D-printable vacuum attachment transforms Otto into a small cleaning robot, perfect for young beginners in robotics. With simple programming, kids can turn Otto into a “Roomba” to clean their rooms while learning coding and robotics…
P
Printables
Oclean Air 2T Zahnbürsten Halter - magnetisch -
Ein Wandhalter für die Oclean Air 2T Zahnbürste mit überdruckten Magneten, um entweder die Zahnbürste oder das Ladegerät in Position zu halten. Ich wollte die Zahnbürste nicht immer auf das kleine wackelige Ladegerät stellen bzw dafür…
P
Printables
Oclean X / X Pro / Z1 / F1 - wall mount clip edition
I would suggest printing it up right beacause that way, the plastic is sturdier and can whitstand the bending better. Also use 3 walls so the clip doesn't contain any infill. This remix is using the Oclean wall holder by Marcus24 as well…
P
Printables
Shark DuoClean vacuum accessory / attachment holder
I got tired of not having anywhere for the attachments so made this. Needs quite abit of infill, I use minimum of 3 outer layers. I sell these in my own eBay shop, you are welcome to take it, remix it etc but please don't just print and…
P
Printables
Oclean Air 2 - stand
Oclean Air 2 stand / holder Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Yes Supports: No Resolution: 0.10 mm Infill: 60% Filament: All PLA Notes: Nozzle diameter: 0.4 mm Perimeters: 3 Layer height: 0.10 mm Category:…
P
Printables
Shark DuoClean IF250 Attachment Mount
Wanted a convenient place for our Vacuum attachments, so whipped this up real quick! Convenient slots for both the included crevice and brush tools. Should fit any vacuum with a 33mm diameter shaft, but your results may vary, .STEP files…
P
Printables
Oclean X Pro Toothbrush Station with Brush Heads Holders v2
Warning! Keep in mind that putting the toothbrush in a charger right after using it will damage the charger over time. That's why I've created the alternative version of this model which does not use the charger. Station for Oclean X Pro…
P
Printables
Oclean Flow Stand for Sonic Electric Toothbrush
Just a simple stand for the Oclean Flow Sonic electric toothbrush
P
Printables
Tefal Oleoclean - Oil box control button
The Oil box control button on our Tefal Oleoclean broke, so I designed a new one…
P
Printables
Oclean X10 Case
This a transportcase for a Oclean X10 Toothbrush. The older X (Pro) will also fit, but have ca. 2 cm space and will rattle in the case
P
Printables
Shark Vertex DuoClean Attachment holster
A simple holster or holder for the Shark Vertex DuoClean cordless vacuum. The Shark did not come with any form of attachment holder to keep tract of the single attachment. Tested others that may have been similar but did not work out.…
P
Printables
OcleanX Wall Mount
So my magnetic plate for the charger\stand combo broke and I needed something else. Came up with this and thought I'd share it. I included the STL as well as the STEP file for you to do as you wish. Note: on my print there's a hole at the…
P
Printables
Oclean One toothbrush wall mounted holder
There are a few Oclean X or Oclean Z1 holders on Thingiverse, but none for the Oclean One (which is the simpler, bigger battery version). So, here's one wall holder kinda copied from the original one. Stick to wall using double sided…
P
Printables
Oclean Air 2 Stand / Holder
I created this stand for my new Oclean Air 2 sonic toothbrush. This stand was created in a way that all the water on the toothbrush after rinsing it can drain. So, the contact area from stand to brush is minimal and all the planes are…
P
Printables
Xiaomi Oclean X Pro/ X / Z1 / F1 - magnetic wall holder
If you found my things useful, you can buy me a cup of coffee: http://paypal.me/marcuss24 Parts: 3M double side tape 2x 8x3mm neodymium magnets super glue (to glue magnets in the 3D printed holder) Print Settings Printer Brand: TEVO…
P
Printables
Xiaomi Oclean X Pro/ X / Z1 / F1 - wall holder
If you found my things useful, you can buy me a cup of coffee: http://paypal.me/marcuss24 There is a new magnetic version of the holder: https://www.printables.com/model/510910-xiaomi-oclean-x-pro-x-z1-f1-magnetic-wall-holder This is…
P
Printables
Xiaomi Oclean Air - wall holder
If you found my things useful, you can buy me a cup of coffee: http://paypal.me/marcuss24 This is wallmount for toothbrush Xiaomi Oclean Air. Use some 3M double tape for mount to wall. Print Settings Printer Brand: TEVO Printer: Tarantula…
P
Printables
Oclean X Pro Stand
Keeping your toothbrush on the charger might damage it. Use this simple solution to keep it safe :) V2 changes: higher base to prevent toothbrush from falling (holding the stand with mounting tape is advised) larger chamfers to better…
P
Printables
Oclean X Pro Charger
Replacement shell for Oclean X Pro Charger If your charger ever stops charging, you can cut it open and clean the PCB. The problem is - once you do it you don't have a charger anymore, only the PCB - that's where this handy replacement…
P
Printables
Tefal Oleoclean Oil Tank Cap SS-203748
Update: Optimized Material use and added ripples for better grip. This is my first model I made myself. Please be kind :-) This oil cap / screw fits the oil tank of an Tefal Oleoclean Deep Fryer. Part no. SS-203748. Deutsche Beschreibung…
P
Printables
Deckel Koboclean
The lid of this cleaning bottle is very fragile. It broke the first time I closed it. Print upside down. Sealing ring (18x1.8) glued in at layer 35. *** Der Deckel dieser Reinigungsflasche ist sehr zerbrechlich. Gleich beim ersten…
P
Printables
Holder for Oclean X PRO / X PRO ELITE / Oclean Kids
Holder for 2 or 3 toothbrushes. This model can be used with these models: Oclean X PRO X PRO ELITE Oclean Kids
