7 modeli
I created this design for the INGCO P20S Lithium battery charger 2.0A (FCLI2001/FCL12001E). The charger needs to be screwed in the base before mounting in the wall. You need to unscrew 4x M10 Torx tapping screw from the bottom of the…
To print the model, use supports, 20-30% infill works best, use support blocker near the lip where the hole is, the overhang is small enough to be printed successfully by most printers.
The size of battery metal contacts is 15 x 13 mm , thickens 0.8 mm A dry wall metal supports are good alternative for metal sheet , for contacts. A wood screw betwine 20 - 30 mm depends on tool handle size on the other side , for securing…
P20s battery box to add buck/boost or battery cut-off circuits to use a p20s battery as a power bank or power source
This adapter fitted perfectly so I just made some holes for the pd65w case and soldered a pair of cables, for the battery conections I used two cables, a pair of male american outlets and four selftapping screws, I used instant glue for…
Older battery adapter can be removed and some part might be needed to be cut off to make a room for new one , just screw it in. There are bonus side mounted addons for hose and cleaning pipes , i recommend print it in ABS because of…
Mounting tools for chargeable portable tools using the P20S battery. It can be installed vertically or horizontally based on equipment size and space. TOTAL, DeWalt, INGCO ...
