8 modeli
This is the first variant which I printed with PETG and 0.15mm structural layers. Works quite good but will probably do some iterations for tolerances. It is a drop-in replacement for the original passthrough holes. As I already had made…
If you want to support my work, buy me a coffee RatRig V-Minion reverse Bowden w/PC04-M8 by dragonfly BMO 2 cap head M6x12 2 T-Nut - Drop In for 3030 - M6 1 Bowden adaptor by Phaetus dragonfly BMO
EDIT/UPDATE: one PETG coupler broke after couple of months so I decided to print one in TPU and it works even better (I will update if TPU will not be able to handle the heat). So recommended filament for this project is TPU. I printed…
Initial Try, no long term proof jet Dimension: Gear - see picture. Outer Dimensions reduced by 0.2mm Fin - outer length 15mm, height 6mm Zylinder (without gear and fin) - inner diameter 25.1mm , outer 29.6mm, 8.3mm I printed it with PLA…
Just another pass-thru fitting for PC04-01 or PC06-01 pneumofitting for PTFE. Use M4 nuts and M4x10mm cylinder-head bolts for assembly and it will work like a charm! G1/8 thread with 0.2mm offset.
This is a replace cover to be used with PC04-01 Use original project print settings Print Settings Printer: Bear 2.1 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: Sunlu PETG Black Category: 3D Printer Parts
I've only had a few PC04-M10 connectors laying around. So I decided to use them for this drybox project. Works fine, so if you need one, feel free to use.
I've only had a few PC04-M10 connectors laying around. So I decided to use them for this drybox project. Works fine, so if you need one, feel free to use.
