Liczymy pasujące modele…
16Nov2024 - Uploaded V2 model which has a shorter front wall and deeper cut to the rear with a larger radii up to the top. This was created to provide a splash guard to the PETLIBRO DockStream pet water fountain in order to prevent water…
Wydruk około 7,81 €–9,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model was inspired by ThoughtFactory over on thingiverse doing this with a feeder by PETKIT. Also refer this for assembly and demo video: https://www.thingiverse.com/thing:6206548/files Goal This whole setup is done with the purpose…
Wydruk około 2,34 €–2,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a very niche problem…but I purchased this feeder to help control my cat's diet because they were becoming overweight. One of them (Yzma) figured out how to operate the “feed” button on the front display, thus dispensing herself a…
Wydruk około 1,56 €–1,90 € nettoWstępna wycena jednego wariantu
My cat was drinking close to the back edge of the water fountain then splashing lots of water on the floor. This promotes drinking where the tongue is closer to the front of the fountain, and if they do splash should reroute the splashes…
This model aims to replace the tank base silicon “portioner” for the Petlibro Granary (PLAF005) with a smaller opening. This reduces the amount of kibbles dispensed which is especially useful when using smaller kibbles. Files included:…
This design spawned from a need to reduce the portion sizes from our Petlibro (model: PLAF006). I've included two STLs for small and smaller sizes as well as the f3d file for anyone who needs to adjust to fit their needs. This part sits…
This remix adapts the original "Dog slow feeder bowl" model to fit the Petlibro Granary Dual 5L automatic feeder. The insert is designed to slow down food intake for cats that eat too quickly and tend to regurgitate dry food. Changes…
Print upside down for minimal supports needed. Premium option with locking alternate lid and 13 cups of added capacity available on my Printables store or at Cults, CrealityCloud, and Etsy (physical prints available) pages:…
Petlibro PLAF103 Fix adds angles to the rotor to help with jams. Will not prevent jams if the outfeed gets backed up working on a fix for this. Printed out of PLA, 2 walls, 15% infill. If your like this model consider buying me a coffee?…
This is a stand for the PETLIBRO PLAF003 pet feeder that lifts it up about 6 inches. This can be helpful if your pet has digestive issues and needs to be more upright when feeding, or if you are using a the PLAF003 food ramp to dump the…
This model was inspired by ThoughtFactory over on thingiverse doing this with a feeder by PETKIT. Also refer this for assembly and demo video: https://www.thingiverse.com/thing:6206548/files Goal This whole setup is done with the purpose…
Wydruk około 2,34 €–2,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a temporary use replacement straw/tube for the PetLibro Dockstream water fountain. My cats ate the original so t
This adapter is designed to work with the Small 5.9" OHMO Slow Feeder Cat Bowl on amazon. My one cat eats way too fast from the regular bowl and makes himself sick, so I designed this adapter to force him to eat slower. I tried other…
This is a stand for the PETLIBRO PLAF003 pet feeder that lifts it up about 6 inches. This can be helpful if your pet has digestive issues and needs to be more upright when feeding, or if you are using a the PLAF003 food ramp to dump the…
This is a remix of the Petlibro feeder bowl. I made it into a slow feeder for a feline Queen we have on a diet. And just to add some humor to it I used FDA Approved material so it is totally food safe. Queen Stella started off her weight…
This modified feeding tray is for this feeder: https://www.amazon.com/PETLIBRO-PLAF005-Automatic-Cat-Feeder/dp/B0953SDCRG/ If it looks like this, you are good to go. I remixed the slow feeder for another model of Petlibro feeder to fit…
Height: 178mm Length/Width: 184.7mm Designed for FDM 3D Printing For best results, print funnel top and lid upside down. .18mm layer height 4 wall layers 4 top and bottom skin layers Various options for infill Minimal supports needed
I use a different bowl in my Petlibro feeder, so I raised it around 15mm so it fits nicely under the chute. It uses fairly minimal amount of plastic. If you need a different height for a different bowl, you could stretch the model, or…
Fits a bit loose and could certainly be made better but this is a 5 minute blender export. Print times was about 1hr on a Prusa Mini v1.
This is a temporary use replacement straw/tube for the PetLibro Dockstream water fountain. My cats ate the original so t
This is a replacement dispensing wheel for the Petlibro One RFID. It reduces the portion size to around half of the normal amount (probably a little bit less). I printed mine out of PLA but you could probably do whatever you want. The…
Slow feed bowl general design remixed from this model on thingiverse: https://www.thingiverse.com/thing:5376282
These Petlibro bowl bowl replacements allow you to dump the food out onto a feeding mat. They work with the PLAF003 model. Check out the PETLIBRO PLAF003 Stand as well. NOTE : The FDM process does leave areas in the print where bacteria…
I originally bought two of these feeders, but one had a smaller drop slot creating inconsistent feeing. I contacted Petlibro and they're aware of the issue but don't send out a replacement essentially saying “you get what you get”. I…
This adapter is designed to work with the Small 5.9" OHMO Slow Feeder Cat Bowl on amazon. My one cat eats way too fast from the regular bowl and makes himself sick, so I designed this adapter to force him to eat slower. I tried other…
I am new to 3D printing and designed a simple stand for my PETLIBRO Automatic Cat Feeder. Tips and Tricks are welcome and feel free to use the model. The cat feeder constantly got jammed since the kibble didn't go into the bowl. It helped…
Print both halves and slide them together. I printed it with petg at a 0.55mm layer height with a 0.8mm high flow nozzle because I was impatient and that made it print a lot faster.
Gedruckt mit PLA Ich habe mir für den PETLIBRO Futterautomat eine Doppelschüssel gebastelt, da es keine solche zu kaufen gibt. Als "Futterschüsseln" verwende ich Untertassen von Ikea der Serie 365…
this replaces the silicon tube inside that was chewed beyond use by one of the cats. print it from TPU and it works great.
You are welcome to remix. Print Settings PETG 3 walls | 3 top and bottom layer. No infill ( walls arent wide enough No support - printed standing up on the bed.
This is a remix of the Petlibro feeder bowl. I made it into a slow feeder for a feline Queen we have on a diet. And just to add some humor to it I used FDA Approved material so it is totally food safe. Queen Stella started off her weight…
Fits Bowls Diameter: 5.35 inches or 136 mm Depth: 1 inch or 27.5 mm
This modified feeding tray is for this feeder: https://www.amazon.com/PETLIBRO-PLAF005-Automatic-Cat-Feeder/dp/B0953SDCRG/ If it looks like this, you are good to go. I remixed the slow feeder for another model of Petlibro feeder to fit…
Once combined you will now be able to use the Petlibro air feeder with the surefeed microchip feeder to keep kitties from eating each other's food. 5 total print files (Top, Middle, Bottom, Slide, and the lid to accommodate the larger…
Once combined you will now be able to use the Petlibro air feeder with the surefeed microchip feeder to keep kitties from eating each other's food. 5 total print files (Top, Middle, Bottom, Slide, and the lid to accommodate the larger…
Give your Petlibro Dual Granary Automatic Feeder a home that's as thoughtfully designed as the rest of your space. This stand elevates the feeder off the floor while drawing inspiration from the clean lines and tapered forms of…
Custom triple-pet bowl for use on a Petlibro (or similar, maybe) automatic pet feeder. We just got a third cat and noticed that they can't all eat at the same time, so one or two end up hogging the food during feeding times. Recommend…
This design is for a metal dish holder for the Petlibro PLAF004 automatic pet feeder. It came with a plastic bowl which apparently can, over time, lead to "chin acne" (their newer models now have a metal insert). The bowl it's designed to…
My cats tend to try to pull the bowl of the Petlibro waterfountain, which result in a wet floor. This design clamps it against a wall or furniture. After 3D scanning the bowl itself i made it a negative resulting in 2 clamps to hold the…
The Petlibro capsule pet water fountain is great. Easy to clean, filters aren't too expensive, looks good. The only issue is you might find is the water bubbly sound is a little loud if you want to place it in a quiet room. This object…
My cats are gremlins that like to push their plates from under the feeder and then lick bare spots in the rug once their food dispenses everywhere. I designed this insert so anyone can easily attach a custom dish holder securely to the…
This is a sorter for the Petlibro Granary Camera Monitoring Feeder (Dual Bowl) It is a spare part if you loose or damage the original one. On my Granary Feeder the original sorter does not work properly, so i designed my own one.…
Riser stand for PetLibro Automatic pet feeder Made this for my pet cats automatic feeder after talking to vet, elevating to 5 inch feeding level will help in eating/digestion. Material: PLA Infill Pattern: Gyroid Infill : 5% Additional…
Thank you to MochPoch for their awesome small kibble adapter . My cat needs to go on a diet and their file was PURRFECT. I printed the original in TPU and was worried it was too flexible. To match the OEM, I added ribbing to keep the…
My cat food was jamming the silicone wheel portionner of the feeder. I contacted the customer service that told me they could replace or reimburse. I took the later and fixed it myself. It's been working great for the past year now!…
Kept having issues with my cats' water fountain spilling water all over the floor. Unsure if it's leaking or my cats are just jerks. Either way, I like the fountain otherwise so didn't want to replace it. I designed this tray to collect…
I added some stickable non-slip pads to the bottom and they work great. They are called GorillaPads on Amazon, but there are other options that are less expensive. Plus, they can be cut, which makes them more economical.
