Tier 2 Salt Phasmophobia
The T2 Salt from the ghost hunting game Phasmophobia. May need to scale up since i design in mm not inches. I printed mine in Amolen wood PLA with great results.
- Pobrania
- 204
- Polubienia
- 18
- Ocena
- 5
31 modeli
The T2 Salt from the ghost hunting game Phasmophobia. May need to scale up since i design in mm not inches. I printed mine in Amolen wood PLA with great results.
Update: Arduino Nano Model uploaded 24-04-2021 Can hold a Arduino Nano and a single 18650 Battery. Redesigned the EMT Tool from scratch as I wasn't happy with my first attempt. This one resembles the in Game Model more closely with a few…
A Phasmophobia Apocalypse Trophy model that should be fairly accurate to the in-game model (attempted to measure it in VR). Recommend printing the base and rod together in black filament, the skull in a metallic filament, and for the…
Emf Meter Components: 1x Aktiv Buzzer 5x Leds with resistor 1x 3,6 M Ohm Resistor 1x Kabel ( for the antenna ) 1x Arduino Nano 1x Switch I used 3M inserts for my printes. You can download the code right here to.
Version one is designed for single filament printers. Version two (MMU) is designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game):…
The perk Thanathaphobia from the videogame Dead By Daylight You can print it with multiple colors if you want to. In that case, you should change filament at: layer 7 (0.12mm layer height) Should be printed at layer height 0.12 You should…
This creepy vase features an army of spiders climbing their webs up the side of the vase. Print it as is to use as a vase or pencil holder, etc. or add the included vase mode insert and a battery powered tea light or three to create a…
A ‘trypophobia’ inspired vase. Print Settings Mine is printed at 0.2 mm on an Ender 3 V3 SE in PLA.
"She plays with us and revels in our pain." Category: 3D Printing
Er, I always worry when I find my gloves that I wear to prevent spider bites that the fact they are often covered in webs means they will be filled with evil spiders. I made this "chip clip" extra loose to allow the gloves to fit nicely…
UPDATE: 05/01/2021 - Added tray lids with no text UPDATE: 04/02/2019 - Added trays for sleeved cards measuring 66x44mm. I have not tested to make sure sleeved cards of that size will fit, but there's approx 1mm or so extra space on the…
My gaming office chair's armrest was broken for a while, and when I checked the company's website, the replacement armrests seemed too expensive in my opinion. So, I decided to take the broken part as a reference and made a slightly…
The Spirit Box from Phasmophobia. Recommended Print Colours: Body.stl - Black Antenna.stl - Grey Screen.stl - Orange I recommend scaling all models by 200% to make the Spirit Box more accurate. Please like and download.
These trays are designed to slide into the boxes included with Claustrophobia 1643. They are a very tight fit and you may want to scale them down by 1-2% if you want them to be loose. I cut the tabs off of my boxes and turned them into…
Bleasdale Farmhouse - Phasmophobia Figurine is a character figurine from the Phasmophobia video game, made as a 3d printable stl for collectors, dioramas, and tabletop display. Use it as a display piece, room decor, or added detail for…
Banshee - Phasmophobia Figurine is a game character figurine STL for 3d printing, modeled after the Phasmophobia banshee for display and collecting. Great for tabletop collectors, horror dioramas, desk decor, and fans building a…
It's a set of easily-printed elements to build a light but strong shelf, for example for insides of your kitchen cabinets. Elements feature Voronoi pattern for the design of their surfaces. Three units would fit on the inside of a door on…
The T3 Sanity Medication from the game Phasmophobia
Brownstone High School - Phasmophobia Figurine is a 3d printable character figurine from the phasmophobia game series, made for collectors who search for phasmophobia brownstone high school model and phasmophobia school character decor.…
Hey there! whoever is reading this know that this is one of my first models and if you print it post a make and leave feedback I would love to hear what you think.
Ghost fingerprints straight from Phasmophobia, including the special Obake handprint! Important Printing Tips: Filament: I printed these using glow-in-the-dark PETG (the type that absorbs light and glows on its own, NOT the fluorescent…
You'll need 4x trypocover-even & trypocover-even-2 (import these both at the same time to create one cover) or else 4x cover-honeycomb The first layer of each cover needs to be somewhat transparent. I use Prusament pearl red for this and…
I printed mine in Black PLA with 2-3% gyroid pattern infill to reduce printing time, took an hour and ten mins (Plus supports). I suggest doing the same because filling the entire inside would take way too long and be a waste of filament.…
Asylum - Phasmophobia Figurine is a 3d printable character model based on a video game character from Phasmophobia, made for collecting and display. Print it for your haunted game room, tabletop dioramas, desk display, or as a gift for…
Version one is designed for single filament printers. Version two (MMU) is designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game):…
A ‘trypophobia’ inspired vase. Print Settings Mine is printed at 0.2 mm on an Ender 3 V3 SE in PLA.
Phasmophobia video game butcher ghost mask and hand machete. These designs include the following STLs: -Complete mask with teeth. -Mask with hole in mouth. -Handheld machete. Printing parameters below. Thanks for stopping by :) No…