Liczymy pasujące modele…
Wanted to do a Star Trek: Picard combadge with stand so here it is. Update May 5 2024 - Widened the gap in the bars to look better. Update December 19 2023 - Redesigned the whole badge to better match the screen prop. Stand base and leg…
Here's my attempt to recreate this very detailed phaser. It took some work, but features a neat sliding top that moves the popup sight up and down, removable power cell, and squeezable trigger for that fidgety satisfaction. February 4…
This was an old design I made like 7 years ago. It got spread around thingiverse for a while so now it's here.
Jean Luc Picard Bust. Star Trek.
Here is my version of the Confederation of Earth combadge from the alternate reality seen in Star Trek: Picard season 2. Has a removable rank/power cell. Update February 1 2023 - Since the face of the badge is more of a brushed metal and…
Note: Build photos coming soon! This replica of the Starfleet Combadge from Star Trek: Picard is the perfect addition to any cosplay armada or combadge collection. This combadge is notable for following the trend of Discovery having…
Original model is by fabbio84 : https://www.thingiverse.com/thing:2922171
15. Mar. 2024 V1.0: First release Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 Get your Dummy 13 here: /model/593185 DUMMY 13 loves COMIC CON! So I have started…
On Artstation there's a solid Jack Crusher phaser model by Nick T that I remixed to split up for printing in parts. Update August 23 2025 - The original model size seemed a little too big, so I scaled it down to 92%. The new size feels…
Quick model of the combadge from the CBS All-Access show Star Trek: Picard. This model uses 8x3mm magnets to allow you to pin this badge to clothing. Just print out the model and pop the magnets in! Check out my Amazon Page to see what…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I really wanted a copy of this. I checked the scale, and it looked more like a driver's license than a business card. I compared my thumb to Brent Spinner and figured they were the same size. If you print this at .2mm layer height, I…
Here's my version of the rank pips from Picard--still sort of a work in progress until I can get more accurate references. The lighting on the show made it difficult to see the pips clearly, but it appears to me the ‘black’ pips were…
Here's the big PADD from the flashback scenes with Picard and Raffi. Has a changeable display slide. Graphics included as a PDF file. Print at original scale. Display stand included. Buy prints of this model: Ancient Stone Inspirations -…
Here's my version of the Starfleet PADD from the final season of Picard. Features a removable display slide for swapping graphics. Split up the display slide so you can print in any color to save your good filament and has a separate top…
Here's my version of the holo emitter worn by Elnor and Raffi in Picard seasons 2 and 3. While it is hard to get a clear look at the prop--and there are no reference photos online--I did my best to get it looking close. I had no idea what…
Captain Picard facepalm created by C3dar
For everyone who wants a Captain Picard Bobblehead on the Dashboard of your Spaceship or on your Printer. This is a Remix of 3D Printy's Bobbleheads , the Spring and Base are needed from his Printable. It is really easy to remix as 3D…
Need a little support Print as fine as you can to get best result
A club member requested this simple prop for a cosplay event and it was super easy to make. Nothing special just sharing in case anyone else wants it too. Uses 6x2mm magnets.
Lithophane of Picard facepalm. It is thinner than a normal lithophane to make it work with a simple tea light. If you use LED backlight, it might be too bright in some spots. Uploaded a V2 that is slightly thicker and prints nicer.…
Rank pips as seen in Star Trek: Picard season 3. Designed for magnets 6.4 x 2.5mm in size.
Star Trek Symbol as Clothes Button
Captain Picard Buddha statue.
Tea, Earl Grey, Hot Noveltea Captain Jean-Luc Picard tea holder. The design has a single color change for the face detail. The one model can hold about 5 tea bags, but the deeper model can hold more. The design is easy to slide tea bags…
I painted the Picard bust file in Prusaslicer to print with 4 colors - tan, black, red, & yellow.
This is my attempt at creating the Star Trek Picard Season Two badge (seen close up in episode 8 around 17:35 or so) The badge is printed with 50% infill and no support. The pin with cross pieces is printed at 100% infill and does need…
If i have to explain then I'm getting too old for this shit. Category: Sculptures
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA JAYO Black Transmission Distance: 0.3 PLA JAYO Gray Transmission Distance: 2.5 PLA GEETECH Gray Transmission Distance: 3 PLA JAYO White…
Captain Picard Monitor Buddy Make your workspace engage with this delightful Captain Jean-Luc Picard monitor buddy! Designed in a cute, chibi-inspired style, this miniature figure features the iconic Starfleet Captain in his classic Star…
Early on in Star Trek Picard Season 3 we see an encrypted subspace message sent to Picard from Dr. Beverley Crusher on this style of PADD (Personal Access Display Device). This is my rendition. I recommend the following filaments: Bambu…
Here are my version of the Officer and Admiralty rank pips from Star Trek: Online Uses 6x2mm magnets and the back plates. Filaments used: Bambu Labs - Basic Silver, Black and Bronze.
NOTE: If you like our designs, please consider supporting our work by joining our Patreon channel—your support helps us keep creating and growing our community! This is a set of pieces that can be used to recreate the Start Trek Picard…
NOTE: If you like our designs, please consider supporting our work by joining our Patreon channel—your support helps us keep creating and growing our community! This is a set of pieces that can be used to recreate the Start Trek Picard…
My attempt to create Jean-Luc Picard from Star Trek, The Next Generation. You may need to resize to fit your needs.
Here is the title logo for Star Trek: Picard, which ran from 2020-2023. Included is a frame, which will stand up on its own. If you don't want to frame it there is an optional stand with additional info. Choose your own display!
Facepalm whoever you like. Category: Sculptures
Jean-Luc Picard (Sir Patrick Stewart) — Bust Inspired by an iconic photograph of Jean-Luc Picard in Star Trek: The Next Generation , this bust captures Sir Patrick Stewart’s likeness in his role as captain of the Enterprise. His serious…
Combination of Cyberman: https://www.thingiverse.com/thing:21812 and Picard: https://www.thingiverse.com/thing:2726648 Printed laying down with supports. Category: Sculptures
"A final salute to our Captain." 🖖✨ This 3D-printable model is a multi-part, color-separated remix of the classic Captain Jean-Luc Picard statue originally designed by Mers_Art . This specific model is lovingly posted as a solemn memorial…
Montage d'une lampe à partir d'un verre Category: Art Tools
A gridfinity holder for the Picard 701-series knife, plus a 10-pack of blades.
Jean-Luc Picard was a celebrated Starfleet officer, archaeologist, writer, historian, diplomat, and philanthropist who served throughout much of the 24th century. The highlights of his career were centered around assignments as commanding…
Clint in his Dragoon form. 2D 3D Print. The file contains both DND mini (1 inch) and DND small (2 inch) models. Models include: Clint (Secure) - Clint is pressed more into the base for a stronger print. Clint (Shield Down) - More true to…
Text works best with 200 percent scale
Here's my attempt to recreate this very detailed phaser. It took some work, but features a neat sliding top that moves the popup sight up and down, removable power cell, and squeezable trigger for that fidgety satisfaction. February 4…
Here are my version of the Officer and Admiralty rank pips from Star Trek: Online Uses 6x2mm magnets and the back plates. Filaments used: Bambu Labs - Basic Silver, Black and Bronze.
Romulan Disruptor used by the Relocated Romulans in ST Picard Season 1.
Borg Picard : Locutus : Star Trek When assimilated by the Borg, Jean-Luc Picard's name was Locutus of Borg. The name, from the Latin for "speaker" or "he who has spoken," was given to him because the Borg designated him as their spokesman…
Star Trek Next Generation - Jean-Luc Picard (Patrick Stewart ) - 1987-1994 3D printable model.
I proudly present you Picelangelo (Jean-Luc Picard) My wife is a huge Star Trek fan so I thought she will love it From all series he's definitely my favourite captain. This is my own remix using free Michelangelo model (don't remember…
Printing info There are four lights-- Uh, I mean, there are two versions of the main part. One which is more authentic with ear lobes, that require supports, and one which I have tweaked the ears of to make it print without supports, but…
