320 modeli
The story: Wanted to print small case for condoms which could be thrown in a bag and forgotten about without worry that the condoms will get damaged, because you know you should not keep condoms in a wallet. I could not find a single…
Wydruk około 1,74 €–2,12 € nettoWstępna wycena jednego wariantu
I couldn't find a yoyo model for a standard 608 ball bearing, that's why I created my own. I designed it with the specs of commercial unresponsive yoyos in mind: 55mm diameter 36-38mm width 54-60g weight Turned out that the yoyo can not…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
This is a dispenser for tampons. Made for diameters up to ca. 20mm and a length of 55mm, e.g. “o.b. comfort super plus”. Holds around 15 - 20 pieces. Ideally the pieces roll down the slope. Sometimes they can get stuck. A little shaking…
Wydruk około 4,77 €–5,83 € nettoWstępna wycena jednego wariantu
The Reference is an unresponsive yoyo, designed around Fluid Printdynamics' 3d printed yoyo spacer kit. It was created by Luftwerk's Jeffery Pang to facilitate 3d printed yoyo iteration in 2014. Kits are still available for purchase, and…
Wydruk około 3,49 €–4,26 € nettoWstępna wycena jednego wariantu
Magnets in the shape of miniaturized Shurikens, one of the Ninja weapons. In these models, all corners are rounded for safety. Models with realistic shape are available on the following page. “Shuriken Magnet — Ninja Weapons” About…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
This was based on an unresponsive yoyo I purchased off Amazon. The design worked for me but it can definitely be improved upon. If you do make it please post the make. Thanks and good luck. Also here's the link to the youtube video on how…
Wydruk około 1,43 €–1,75 € nettoWstępna wycena jednego wariantu
This is a simple keyboard stand inspired by the acrylic keyboard stand from ( https://thekey.company/collections/accessories/products/acrylic-keyboard-stand-pair ). I wanted a simple, robust, and attractive stand for displaying a keyboard…
Wydruk około 6,87 €–8,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mimic : Borderlands : Weapons Chest Trap Gcode and 3mf come as split model so you will have to glue parts together.
Wydruk około 9,10 €–11,12 € nettoWstępna wycena jednego wariantu
Hello, Welcome to my profile, full of models and miniatures :-) I have for you Holders, gun hangers and others. For wall mounting or wooden cladding. You have 4 sizes from me: 60mm, 70mm, 80mm and 90mm. Just choose the color, material and…
Wydruk około 4,13 €–5,05 € nettoWstępna wycena jednego wariantu
Wydruk około 0,52 €–0,63 € nettoWstępna wycena jednego wariantu
all weapons are originally created from @katfish heavy industries just resized to fit the balloon fight game.
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
100x160mm sign, with text “WTF? NFI. HTH. HAND.” Which translates into English roughly as “I am unfamiliar with this situation, and have No Further Information. Hope this helps; Have a Nice Day!” Mesh and Solid (may print easier) models…
Wydruk około 1,35 €–1,65 € nettoWstępna wycena jednego wariantu
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these at your own risk. Update - 2/20/2026: If you care about the future of 3D printing……
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these models at your own risk. There is an updated version 2.1 of this Dummy 13 Weapons Pack,…
This is a Heavy Weapons Pack for the Dummy 13. It contains - Gatling Gun - Bazooka - Barrett M82 - 2x Desert Eagles
Remix Dummy 13 Weapons Pack Version ORIGINAL: https://www.printables.com/model/681425-dummy-13-weapons-pack-version-20
04. Jan. 2024 DE50 detailed with silencer (UGH) Additional holster variant 28. Dec. 2023 Redesigned the hands to ease printing 3MF file added 27. Dec. 2023: Revised as a set New armed hands New Desert Eagle 50 for UGH added New Holsters…
Magnets in the shape of Shurikens, one of the Ninja weapons. [ Information ] A “miniature version” of this Shuriken Magnet is now available on the following page. “mini-Shuriken Magnet — Ninja Weapons” Caution Please be careful not to…
Here are some weapons shrunken down to fit the 13 series H&K G11 FMG Scar-H Kriss Vector SSG-552 Thompson (Tommy gun) Keltec KSG bullpup shotgun Mateba semi auto revolver BFR scoped revolver SITES Spectre M4
2 Katanas and a holster
Since my child has always lost his brick Minecraft tools and weapons, I decided to rebuild them. Furthermore, I have already created a possible variant of the new Mace 1.21. In total I offer the following items here - Sword - crossbow -…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
I got inspiration from LEGO and the model of Johnny B Mac … So i used the base of the bagpack (with its new hole in the back) and dillettanted a new dual holder for the Mini 13 and the original sword in mind. But also it can hold the…
Autocannon, Flamethrower, Autoshotgun, Pistol, LAS-5 Scythe and the Strategem Ball!
I've quite a collection of Skyrim models and I have here uploaded a vew different files some from https://www.pepakura.eu/skyrim-full-daedric-armor-male/ and some taken from Garys mods. I'll upload the female version next so Hopefully…
These sci-fi* weapons were designed from scratch for the Lucky 13 jointed figure by soozafone, though they may work with other action figures. They are borne of my own imagination, however they were clearly inspired by science fiction…
10 LEGO Weapons, perfect for your LEGO set!
Here are Skyrims daedric weapons. Print instructions Category: 3D Printing
Designed for use with the Lucky/Dummy/Mini 13 action figures designed by: soozafone . Pictured is the Dummy 13 (licensed under CC BY 4.0). Designed to be easily press-fit with little to no support. If your printer is tuned well there…
Created by mystoopidstuff
Dummy 13 Fortnite weapons Print with supports. photos are coming when I print Enjoy:)
Ripped from the game, minor edits in Blender, exported as STL. Caution: Have not been tested, resized based on existing weapons on this website. Might add other weapons and reupload this file. Print with supports! Edit: Added the BFG, Q2…
You can carefully warm up the Facehugger with a lighter to pose it.
Some more awesome models from DrMcKay, Cheers Jace As a request I have mad a solid version of the T21 for Legion scale although I dont know what size that is hopefully it will print ok, CHeers Jace
I recommend not overloading the chain, it may break, especially at the head. ATTENTION! This toy hurts when hitting, recommended for children :)
Some weapons from GTA Vice City, ripped out of the game and fixed in Blender (resized and extruded edges) Uzi Mac 10 Tec 9 SPAS-12 Stubby shotgun Ruger Use supports. Also be careful with the SMGs (Uzi, Mac 10, Tec 9) because they're so…
Ripped from the games, connected with the Dummy13 weapon grip. Yun Seong's sword Lizardman's Axe Cervantes' sword Sophitia's sword Soul Edge classic (may have ruined the geometry, oh well) Will add other ones next.
I made some ancient weapons for the 13 family the hands I used are the "Universal Grip Hand" by Mici. You can use the default hands but that requires a lot of sanding to get it to fit right with the “ugh” You just have to sand the top and…
This is a pack of melee weapons for lucky 13. Each one should be printed flat on its side with the handle pointing towards a side to avoid easy breakage. I have included files for the axe, sword, hammer, and twin blades separately so that…
Dummy 13 Fortnite snipers. Print with supports. photos are coming when I print Enjoy:)
This is a remix of “ Dummy 13 Weapons Pack Version 2.0 " Resized the Weapons for a better fit
Four weapons from Minecraft and Minecraft Dungeons( Thanks to Falling Entropy for the picture)
A weapon's platform for the Atelidae series. 03.14.24 - Looks like I neglected to add several parts. Fixed that. This piece should fit any guns that fit the hands. Assembly -
27. Dec. 2023: A sports bow that can be used with my UGH mod Renamed the model. This is now a set Available soon: Back holster for the bow Hip holster for the ice axe Print the parts with 0.15mm/0.10mm layer height. Bow: You will need my…
This is a set of weapons I modeled in Blender, referencing the 3.5 Edition D&D Player's Handbook weapon illustrations; if they look weird, that's how they were drawn. :) !These are not meant to be printed out by themselves! They are…
1:16 scale weapons pack for F-16 This is a pack of additional weapons to supplement this f-16 scale model that includes a somewhat accurate model of the following: AIM-9L Sidewinder AIM-9X Sidewinder (same as included in the F-16 model)…
LEGO Counter-Strike Weapons
Hi Josh, Here is my collection of killzone weapons. As always still lots ta do on my projects list. But maybe there is something here worthy of your project. I'll upload Armour and helmets in due course. Do check the sizing suits your…
A simple card full of awsome weapons for Dummy 13. .2 layer hight
An unresponsive yoyo that takes a standard size C bearing, 12mm axle and slim 19mm response pads. Smaller axle can be used with a thinner bearing. I used a centre trac bearing, and aliexpress pads. Printed with 100% infil, 0.6 line width…
This one has been on my list for a while. The shipping container terrain I releases a few years ago for Gaslands was part of the reason I started my patreon. After Gaslands Refuelled was released I kept meaning to update my containers…
This model features several weapons made for the Dummy 13 found in The Legend of Zelda: Tears of the Kingdom. The weapons are: The Gloom Club, The Master Sword, The Royal Claymore, The Knight's Broadsword, Biggoron's Sword, and The…
A collection of rigged humanoids, body parts, weapons, my Cura profile, and a Blender work space that is inch based. Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models…
Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 I designed this weapons for DUMMY 13 goes to COMIC CON - Mass Effect - Commander Shepard (male/female) . You may also…
A batarang and grappling hook for the Mini 13 model by soozafone. All models fit the closed hand included in the Mini 13 model. The Batman-Batarang.stl is the batarang. The Batman-Hook.stl is the grappling hook. The…
Dummy 13 Fortnite smgs Print with supports. photos are coming when I print Enjoy:)
This is a compilation of some of my older weapon designs that I want to share with the community. The models are already scaled for Gaslands and 1:64 vehicles. Most can be printed on an fdm printer without supports. Some may need a little…
Designed to be printed in resin, but some for the bigger, simpler pieces (eg: rocket pods) would probably work. Would easily work for kitbashing warhammer and other tabletop games. Let me know if you attempt any of these on a FDM printer,…
I wanted one, so I made one. Not scaled, sizings eyeballed, but it looks pretty good and is decently accurate to the geometry I could see without having the models themselves. This includes the inner face of the orb. The model is around…
Original models from the Everquest Mass Multiplayer Online Role Playing Game (MMORPG) extracted from the EQG files. Available as both 3MF and STL. Great for use in miniatures, tabletop RPGs, 3d modeling, reminiscing about an exquisite…
To achieve the character's intended size, it is recommended to scale these 3D models according to the dimensions depicted in the manga 'Spy x Family.' Additionally, for improved printability, consider using Prusa Slicer to cut and add…
Another Zelda weapons pack for the dummy 13. I went a little crazy with this one, but I had a lot of fun with it. This pack includes the following weapons from ToTK- Fierce deity blade, Dusk Claymore, Feathered Edge, Zora Spear, Boulder…
Tau Ceti is a dangerous place, so you better hit the armory and load up. Here's a set of weaveable scale weapon accessories from the game Marathon by Bungie, modified to include and attach to Carbon 13/Dummy 13 models and the Marathon…
Just a set of weapons from the armor of the black Templar (And not only) Dummy 13)
Here you go… A little something for the upcoming zombie apocalypse.
The Intro is a yoyo for the first time learner or experienced player, designed to be easily 3D printed. I designed this yoyo to easily share and introduce yoyoing to others and to provide a reference model for my 3D printed designs. The…
A selection of heavy weapons for my Soldiers of the Imperium. A certain company have horrible tripods that look like they will fall over as soon as the weapon fires. The carriage is basically the design of Forpost_D6, modified for 3 mm…
Free sample STL file. This file does not contain the full details/textures, nor the full poses, weapon and pet options of the main pack. Rat swarm clan leader armed with a single blade. Includes a version with a back banner and one…
Gidday Brent, as discussed, this was all I had regarding the GOW weapons. good luck with your project and post some pics if and when you can Cheers Jace
The latest mods from Ellie Valkyrie's garage! GUNS GUNS GUNS! More guns than any Freeway Flier can shake a stick at! Requires supports. If you like my work and want to see (and print) more of it, please consider stopping over at my online…
This is Ka-Bar sword and knife for Dummy13. It is also compatible with Lucky, Easy, and Mini 13. I used .2 layer hight, a raft, and tree supports to print this. I also raised it about 5mm in the air.
Another terrain piece for the modern/sci-fi wargaming table. Might make a nice objective. I've been wanting to take one of my bombed-out buildings and make it more visually interesting, so I grabbed onebitpixel's crate and Forpost_D6's…
I've designed some most common and widely used weapons for my jets. The set consists of: AIM-9, AIM-7, AIM-120, R-73, R-27, R-77 air-to-air missiles AGM-88 Harm, AGM-65 Maverick, Paveway II, Kh-31 Krypton, Kh-25 Kegler air-to-ground…
--------!- These are not meant to be printed as is -!-------- With that out of the way, here is a random assortment of different bows for you to use to customize 28mm D&D style miniatures, using Blender, Meshmixer, Zbrush, etcetera. The…
Download Bane villain Batman DC Comics fanart STl 3d printing by CG Pyro [Thundercats collection 30 characters and 40 busts] We are celebrating, we have reached 30 characters and 40 busts in the Thundercats collection. Hello friends, I…
Supports not required! Each model is carefully designed to capture the look of the most legendary guns from Counter-strike, reimagined as portable keychains.
If you're reading this I'm going to assume you're interested in joining or are already in the 501st Legion. Please log in and read my build thread on FISD for full details:…
Scenario 21 of the Gloomhaven: Jaws of the Lion board game features two weapons shelf obstacles. I created a weapons shelf for the game by editing and combining .STL files from a variety of sources on Printables and Thingiverse: Shelf…
Pls comment if it works.😊👍
Add supports, and please tell me if you have any complaints/recommendations for me. Thanks
Halloween pencil weapons - I only invented a scythe and a ball mace, I couldn't think of anything else at that word. I couldn't think of something scary with a mace, so there's a scythe :) You have a choice of two ways to print ball mace:…
A few weapons from WoW I made over the last couple months. No specific printing instructions but Valeera is scaled pretty small and most of them are 10x too big for pretty much any printer to handle, so size those down a bit. Otherwise,…
Did you enjoy the game World of Warcraft ? It might please you to have the opportunity to 3D print various weapons that appear throughout the game for display and cosplay. Printing If you have a large enough printer, or if you have a way…
Update: Oct 13, 2025 - I added some more weapons used on various models as well as a new "thicker" swirl. The original swirl is fine but this thicker one has more geometry on the tip so it should print better on FDM (although will need…
Mini 13: Figurine System Compatible Melee Weapon Set, includes Blunt weapon designs: Axe - Fancy Halberd Head Axe - Simple Halberd Head Hammer Banded Mace Knob Mace Spiked Mace Nightstick Baton
You love the game Ark Nova and want to make it look even better? Here is a collection of additional game materials to make the game to a 3D experience. The models have the perfect size for the original game, so you just have to print…
Simple printing without supports. Use an M3x20mm screw to connect the hinge. Tampon size normal.
If one person out there actually uses this I will be shocked, but I needed this part for a GFB blow off valve that I bought for my WRX that didn't come with the stock part. I may try to improve this part to achieve different blow off…
A custom set of 1/144 scale weapons for use on Gunpla Models, based on the styling of mecha designer Ippei Gyoubu and his work on Gundam: The With From Mercury's Jeturk House Mobile Suits. Included are: Beam Bazooka Beam Rifle Shot…
Castle Gargoyle from Elden Ring with Weapons (double-sided sword, battle axe, short sword, & short axe)
DUMMY 13 Weapons Storage Rack (Holds 26 Weapons) A compact storage rack designed specifically for Dummy 13 weapons, holding up to 26 pieces while only using around 32g of filament. Perfect for keeping your growing Dummy 13 arsenal…
Funny Sign - “Todays good mood has been sponsored by coffee” Complete with recesses for 10mm x 1mm magnets to make the sign easily mountable on any flat ferrous surface. One of the files is a multi-object file to make it easy to colour…
