Liczymy pasujące modele…
Update 11.03.2026 - fixed Right part of the chassis and the rear left arm - there were some incosistancies in between the left and right arms: Update to RUDE - 09.2025 I had some of the non-printed components available in my storage so…
comes with the spoiler which you should be able to print without supports. also comes with a guide for drilling the holes. drill holes, then secure in place with 4 m3 screws and nuts. you can glue the guide piece in place for added support.
The body shell on the Robak has always been a bit of an afterthought. It was never quite perfect. Either hard to install and remove or with a tendency of popping off during landings or crashes. After trying out an SUV body in the recent…
My body was moving sideways with the normal version and I didn't want to use screws, so made modified Front clip to use clips. I printed mine out of hard TPU but other materials should work nicely. You'll need to drill ~5mm holes on the…
Introducing the All-New Robak 2: The Ultimate RC Car for Makers. The second generation features an optimized suspension, providing increased off-road clearance. Many structural components have been beefed up to endure more than just mild…
Update 11.03.2026 - fixed Right part of the chassis and the rear left arm - there were some incosistancies in between the left and right arms: Update to RUDE - 09.2025 I had some of the non-printed components available in my storage so…
Verstärkte Version der Steering Blocks um Crashs besser zu überstehen.
This is a part that fits the Robak 2.2 3d printed rc car: https://www.printables.com/model/119715-robak-2-rc-car --- I drove Robak 2.2 on concrete. It hit a pothole and became inverted. The car slid on the top, damaging the shocks, a…
This 3D model represents a practical tool hanger designed specifically for the dough hooks of the Wilfa Probaker dough machine. The hanger is engineered to safely and neatly store the dough hooks when not in use, ensuring that they remain…
Printed in PCTG with supports. Robak car: https://www.prusaprinters.org/prints/119715-robak-2 Paddle tires: credit to SkippyMcSlappyPants for the great paddle tires design.…
comes with the spoiler which you should be able to print without supports. also comes with a guide for drilling the holes. drill holes, then secure in place with 4 m3 screws and nuts. you can glue the guide piece in place for added support.
Notes The pictures were taken over the course of almost a year, so the actual files may differ from the designs shown. The red/white and purple/white cars are the most recent versions. These bodies require proper cable management, as…
Two halves connected with M2x8mm bolts and nuts (x7) Robak car: https://www.printables.com/model/119715-robak-2
[OBSOLETE] Please note that these model files are outdated. For the latest version, use the most recent files from the original Robak 2. https://www.printables.com/model/119715-robak-2 ------------ This package contains upgrade parts for…
Thank the author a lot for making the Robak 2 project. I implemented wifi control, low latency with WebRTC, with camera could turn around using Rasberrypi Zero 2, servos, and a 3d print pan tilt module I designed. I learned a lot from…
Body post for Robak 2 RC, also played around with post you can add a magnet to hold the body with but I have not tested it yet. Will need two M3x8 and washers to mount the post.
Please leave a like and add it to your Robak collection. I am always happy to collect free filament from Prusa. Thanks and have fun. Check out my curated spreadsheet with shopping links / prices, order tracking options Credits for the…
The HSP 108015 axle shaft has a thread that is too short to use it with the original adapter. I reduced the thickness of the hub from 4 to 2.2mm. See drawing. That blind hole is there on purpose. Helps generating supports better. Remove…
Stand for Robak, or any RC car similar in size. To honour First Robak and with love to this project, included logo in design. You need: top - x1 leg - x2 connector - x2 a bit of glue ;P Print with any material You want, no supports needed.
HSP differentials and drive gears have quite poor precision and the gear mesh usually needs to be adjusted. In the design there is ~1.5mm clearance in the housing to adjust the diff position. Print the shims and test which pair works…
Must be printed with supports - not tested yet on the Robak. Rim's on the photos are printed with Extruder Flex Hard. Remix from robaki - thank you for the very cool rc-car
Skrobak do szyb. Drukuj obrys x4, wypełnienie kratka 50%, wartswa 0,2-0,25, brak podpór.
Update your Robak 2 with this 19:1 gear reduction mod, which increases torque at the expense of top speed. Benefits include: Higher acceleration Improved climbing capacity Reduced motor startup hesitation with sensorless setups More…
Connector piece should friction fit and allow the stand to be used without glue.
Skrobak, czyścik szyb z odsysaniem. Wypust na wąż fi 12mm
The hole in the middle was covered with a 0.2mm layer to prevent supports in the hex socket. After printing use a knife and cut the hole open. Printed out of PETG but a hard TPU lasts probably longer. Print settings: 5 Walls 40% infill…
I've (poorly) mashed together a few models to mount a stepper motor along with the KNOG led clip to the front of the robak brace to allow for fpv head tracking. The brace and the Knog LED clip models were taken from the robak files while…
After printing the excellent Robak RC car, I designed a different body for it. It consists of two main parts that bolt together using M3 screws and two light pods designed to house Some Injora double LED pods. Included is the STL File so…
For my needs, I made it easier to access the electronics, the battery Material Magnet 10x4 strength 3kg ( https://www.unimagnet.cz/p-10_z831/ ) 3 pcs screw M3x8mm (used original) 1 pc screw M5x8-10mm Robaki - many thanks for a great model…
Super Bright LED Light Bar RC Car Roof Lamp CH3 Control for 1/10 RC Crawler Axial Capra SCX10 II 90046 RGT EX86100 TRX6 TRX4 D90
Update 04.10.2025: Some people who tried this upgrade found the original arms a bit thin with certain materials, so I’ve uploaded a strengthened version. Both versions are interchangeable. Lower arms are now 6 mm (were 4 mm), and upper…
![[ARCHIVE] Robak 2 Modpack .001](https://media.printables.com/media/prints/278397/images/5191813_fd4c3445-1ca6-4b63-a0bc-ab8bfce810e8_55809432-ad0d-4eff-990a-bc7ef2f8f60a/archive.png)
