Liczymy pasujące modele…
This is a newly designed model that I came up with myself. Rafts: Yes Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Rems do not use Supports!! only rems: Speed 60mm/s
I'm very glad to present you the Tiny Grasshopper, a flexible Print in Place Model Video This little friend is printable without using Support Structures. I also printed it with 80% size and the Result is great. Prints great with PLA.…
Geometric grasshopper with elongated polygonal legs in a minimalist pose.
This stylish open-top handbag was designed as a lightweight and flexible fashion accessory. Whether you're heading out for a picnic, casual shopping, or a trendy night out – this minimalist tote could become your go-to printed companion.…
Press down on it's tail and let your finger slip off to make it jump forward. It jumps up to 2 meters forward. Print on its side. Stronger walls recommended.
Printing Information: Use tree support to support the voronoi structure (both antennas need to be supported) Use a brim to improve the contact surface with the printbed
a Jumping Grasshoper whery easy print!!! no support needed!!! standart printing will work great!! For great jump use PTGE!!!! Commercial Membership – all my models with a commercial license: https://www.patreon.com/c/BondFire
This is a set of 2.2 dish wheels that I designed for use on the Tamiya Hornet, Grasshopper, and Frog. I print them at 100% infill and 0.1 layers. Category: 3D Printing
Rear blace for TAMIYA SUPER HORNET & GRASSHOPPER2 Installation video. https://www.youtube.com/watch?v=cLVxrM2hq1s&t=3s
I've tested it in both PETG and Woodfill PLA, it's best to start by printing 1 leg section and 1 pin to test the fit. Pins should slide in easily and allow the leg piece to spin freely. If it is not working, try adjusting the extrusion…
remake of the original battery cover of the tamiya grasshopper/ hornet,...
Here's a set of 2.2 wheels for the Tamiya Grasshopper 2/II. You have to use the old 5 pin style drive hub found in the kit or print a set of them from here: https://www.thingiverse.com/thing:4159329 These are the same as my wheels for the…
To fit the shell i trimmed down the point of the chassi to the level of the bumper mounts and notched the bottom of the front of the beetle shell maybe 3mm. The files for this are the front+rear mounts, they attach to the chassi using…
Have fun with this low poly grasshopper! Check out my profile for more low poly animals.
This adapter lets you mount the Cybex Shopper in the lower basket position without losing any stroller functionality or sacrificing storage space. Key Features: Remove the shopper freely without taking off the adapters, carrycot, or…
I repurposed the excellent truggy wall hanger from @Qrome to fit my old Tamiya Grasshopper. Printed in PETG w/ 3 perimeters and 20% gyroid infill. Two (2) #4 screws are required
For those who may be using Rhino and possibly Grasshopper for modeling, here is a boomerang that is made in Rhino and Grasshopper. Design-wise, it is pretty similar to my Yet Another Vee design. In terms of construction, it is basically…
This is a grasshopper leg that has been extracted from a micro CT scan.
Dispenser di shoppers di grandi dimensioni + tappo. Base 15cmx10cm, altezza 35cm
Grasshopper definition to make basic gridfinity units. Test it and see if it works for you! 3dm and GH file are in the zipped folder.
Tamiya Spot Light for Hornet Frog Grasshopper Hotshot Falcon in order to replace the original one.
Came across a 1951 or so Elna “Grasshopper” sewing machine, the rubber feet from 70 years ago were unsurprisingly as hard as rock. Once the original is pried out the new should just push on. You can change the walls and infill on TPU to…
I designed this light because, once I flipped my hornet the light fell of. I am sure this has happened to allot of people. Print Settings Printer Brand: Creality Printer: Ender 3 Resolution: 100 Infill: 50% Filament: Tinmorry PLA Any…
Part broke off so designed replacement. Should fit the default M3x8 self-tapping screw Goes well together with the battery cover by @Pedro34 https://www.thingiverse.com/thing:3250898 If you want to buy the original parts tree search for:…
I tried so many carriages and was never fully happy with them. This design allows me to be able to see the nozzle while printing and still has dual Turbo Fans and a Pinda Probe. The fan ducts come from: Cobra Carriage - E3D V6 Carriage -…
Take a look at this Scout woggle featuring Pukeena, the Jungle's grasshopper. It's a great fit for awarding to a Cub Scout named after this character from Rudyard Kipling's 'The Jungle Book.' From later tales by Rudyard Kipling, Pukeena…
GHR-5H Grasshopper for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files • ghr-5h4.stl…
This will be a great addition to your grasshopper and will make it a lot stronger. This is a print to save you the hassle of finding what sheet the suspention piece that you broke when using your grasshopper with a 540 motor in it! you…
Take a look at this Scout patch badge featuring Pukeena, the Jungle's grasshopper, ready to be stitched on. It's a great fit for awarding to a Cub Scout named after this character from Rudyard Kipling's 'The Jungle Book.' From later tales…
A smiling grasshopper with rounded legs and a compact body, optimized for one-piece printing. Powered by MakerWorld – Image-to-3D ( https://makerworld.com/makerlab/imageTo3d )
Grasshopper that moves! The wheels and legs are designed to move while moving. Or such. Again, for best results use wooden filament, but your choice. The antennas thingy may be challenging to print, do not be afraid to use supports. Or…
This is a volumetric doser - useful for measuring dry granular material; like petfood! This is a completely parametric object - which requires Rhino3D/Grasshopper. If you have these tools the atttached grasshopper script will allow you to…
Grasshopper Rear Belt Shield Isolator Grasshopper OEM 422090 Recommended Filament: TPU COMPATIBILITY INFO: Isolator for Grasshopper Midmount rear belt shields and liquid-cooled models with grille assembly Fits MidMount air-cooled models:…
The handles on my Altran Velo bicycle basket bounces and rattles with every small bump in the road, which is really annoying. This clip locks the handle firmly in place while being easy to clip in/out. The clip is designed for the Atran…
🦗 Meadow Grasshopper Wildlife Bookmark
A steampunk grasshopper monk with a ridged head, long antennae, veined wings flaring from the shoulders, a scarf collar, riveted armor and hose tubing. Edition No. VIII of The Bust Collection. PRINT NOTES Size: 67 x 114 x 120 mm, scalable…
Replacement plug housing for Elna Grasshopper sewing machine. It has been modified to make it easier to route the wires and attach to the machine. PETG recommended for this model. **Model is in imperial units
Mein GrassHopper fx hat einen Tillerlenker. Die Öffnung für den nicht genutzten Untenlenker–Steuersatz hatte der Hersteller seinerzeit "kreativ" verdeckelt. Schlussendlich fiel das Dingens irgendwann ab – also schnell einen passenden…
A smiling grasshopper with rounded legs and a compact body, optimized for one-piece printing. Powered by MakerWorld – Image-to-3D ( https://makerworld.com/makerlab/imageTo3d )
With this lid, I can reseal tuna cans and put them in the fridge without stinking up the rest of the food. It was modeled around an 86mm Euroshopper Tuna can but will fit a bunch of other stuff. The text is just some extra I put up, you…
A model of the F9R test rocket Space X used to test vertical landing technology before building the Falcon 9 the model is simplified and designed to be scaled down and printed in a normal 3d printer
