Liczymy pasujące modele…
The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have it printed from petg with 100% infill. it could be that you have to deform it with the hot air dryer, since the steering wheel is slightly curved. fitting accuracy 100%
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It has always been impractical that the battery cover of the Stromer ST3 or ST5 does not remain closed when the battery is removed. With this holder, you can now keep the cover closed. And if it's not holding the cover, you can stow it…
Wydruk około 1,02 €–1,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Build with PLA 0.20mm 0.4 nozzle 40% infill + support everywhere Print time: 17h32m
Wydruk około 19,14 €–23,40 € nettoWstępna wycena jednego wariantu
The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the baseplate for an additional compartment that can be mounted to the rear fender of your Stromer ST5 (might work with other Stromer bikes as well). You can hide a second GPS, alarm or whatever. It's designed to store a PAJ EASY…
Wydruk około 0,91 €–1,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the cover for an additional compartment that can be mounted to the rear fender of your Stromer ST5 (might work with other Stromer bikes as well). You can hide a second GPS, alarm or whatever. It's designed to store a PAJ EASY…
Wydruk około 2,26 €–2,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you are a fan of Stromer e-bikes (ST3 or ST5) and want to show that on your Lindr beertap. The model in the 3mf files are for Prusa Slicer project. They have settings to get a fuzzy surface, except where the ST3 or ST5 logo is. It is…
Wydruk około 2,65 €–3,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The model is designed to mount an original Garmin Oregon Bike Mount on a STROMER ST3 or ST5. It uses the provided stem cover and fits on both stems (Sport and Comfort). The connector parts are not necessary, but they prevent a rotation on…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ce modèle est un assemblage de 2 modèles : "PZRacing Start ST500 Laptimer Mounting Bracket for Yamaha R6 RJ27" de Knorrf1x sur Printables "Support d'indicateur de vitesse pour Kawasaki er6n" de Keep3r sur Makerworld Compatible avec :…
Wydruk około 3,80 €–4,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…
hák pro zavěšení strunovky DeWalt DCMST561 na stěnu. Upevnění pomocí 4 vrutů ke stěně. šířka háku je 70mm a maximální průměr zavěšované rukojeti je 31mm. Model tisku “na bok” a tím pádem nepotřebuje podpěry a je zachována maximální…
I created meanwhile a parametric design: Stromer Mudguard Extension V8 - ST2, ST3, ST5 and ST7 The front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is a little too short for rainy road…
The original solution from STROMER for ST3 and ST5 to mount a smartphone or a GPS looks not very nice. So, I created three different plates to improve the look. With these plates, any mount (Smartphone or GPS) looks nicer. In addition, it…
Recently I found out about these tools for removing microfit pins from their housings and they're the best dang extractor tools I've ever used, and deserve a nice case to house and protect them. I remixed the amazing rugged box by Whity…
I purchased the TP-Link TL-ST5008F off of AliExpress but it didn't come with any metal brackets for mounting to a 19" rack, so I modeled these up. They'll probably work for other switches with the 4-screw hole side mount as well, if the…
I designed this case to serve a dual purpose. Mainly as a Gridfinity compliant tool tray that can be stored in a drawer or on a bench/shelf in the workshop and can also be stored in a closed case to be carried to a work site. The design…
Gedruckt aus Petg mit 0.25 layerhöhe drucksupport wird benötigt um eine glatte Fläche für die led Lampe zu ermöglichen
My Virpil MongoosT50 CM3 throttle lives on a swivel chair. The cables stick out from the front, and I'd like them to not get bashed by my carelessness. Hence, a bash guard. I think it'd fit a CM2, but I don't have one to try. Replace the…
Gedruckt wurden die Teile aus Petg mit einer layerhöhe von 0.25 bei ABS empfehle ich 0.15-0.2 layerhöhe beide Teile werden danach zusammen geklebt. dank der inneren Auflage liegt der Deckel perfekt drin und ermöglicht somit ein einfaches…
Biltema ST56 snow blower chute. It seems to be a whitelabel product from china so should fit a lot of other brands. The replacement chute that is of really poor quality and thin plastic costs around $60 so this is definitely cheaper. It…
This is a Garmin mount for the Stromer ST3 or ST5 with a comfort stem. (This only has been tested and fitted to a ST3. The ST5 stem fits but not flush to the opening) I wanted something where I can mount my existing Garmin GPS which fits…
The buckle fits the DEWALT DCMST561 model perfectly. I recommend printing with PETG or with a minimum of 60% PLA filling
This Dewalt trimmer is a great tool, but the balance is off. It is very nose heavy, making it awkward and tiring to use... This small design clamp itself tightly on the main shaft with two M4 screws. Insert a small carabiner into the…
thing for flyingbear ghost5
По-быстрому на коленке сляпаный мод для вулкана. сопла удлининнены на 8.5мм For Flyingbear ghost5
This is head-link for chain I like. Made for Direct Alien lightweight extruder for Flyingbear ghost5. chain files are also added. Original chain: https://www.thingiverse.com/thing:4398459 Original Alien lightweight extruder:…
This is a 1x4 Gridfinity bin to store two JRready DA Removal Tool Ser-B depinning tools. They have raised icons indicating plug or socket and a layer change, mmu, or sharpie can make them easier to read. The icons were enlarged for the…
So couple of thermostats in my house were vertically mounted (old school). I switched to Emerson Sensi and there was no conversion plates at the local hardware store. Hence, I designed a Backplate for Emerson Sensi ST55 that will help you…
TST507 Tire Pressure Monitor Holder Can be put on center of the dash on F150s and other trucks I use a brass threaded insert to attach the two pieces. Print Settings Printer Brand: Prusa Printer: i3 MK3 **Supports:** Yes Filament: COEX…
Here is my Mounting Solution for the PZRacing Start ST500 Laptimer. It is specifically designed for the Yamaha R6 RJ27 (2017-) , but may fit other Motorcycles with a 36mm Fork Bridge Nut too. I recommend installation with 3M Dual lock…
made these because the two outside vents on the top of my helmet are not covered by the fresh air supply duct letting the fresh air out letting in dust.
small part to hold ptfe tube for direct mod.
protects the extractor tips and keeps tools together.
Amarre telefono para iphone. amarre especifico para la potencia de una st530 de decathon. enjoy.
Allows you to mount a Sensi ST55 thermostat to a vertical mounting box. I was lazy so added a slot so I wouldn't have to undo the wires in order to install the mounting plate. Onshape link if you need to edit the design:…
I printed the chain guard from the https://www.printables.com/model/151726-chain-guard-for-btwin-rockrider-50 webpage, but the mounting points weren't right. I didn't want to reprint it (waste of filament?), so I designed an accessory…
This Dewalt trimmer is a great tool, but the balance is off. It is very nose heavy, making it awkward and tiring to use... This small design clamp itself tightly on the main shaft with two M4 screws. Insert a small carabiner into the…
The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
