Liczymy pasujące modele…
Feel free to print these files for yourself or get them printed through specific services like 3Dhubs. Please don't support the illegitimate eBay/Facebok sellers that stole the design without attribution! If you use these files, I would…
These are parts I made myself in order to screw on the full fairings on the sv650s. The fairing hold really well eventhough I did not use the Frame Sliders. The Holder on the radiators have to be printed twice. You can choose between the…
Based on an old design with slip in stacks in factory rubbers which saw a 3.5hp improvement on the dyno without tuning. Decided to improve it as multiple friends are now tracking these bikes so made a full boot replacement and improved…
Very easy to print suzuki sv650 mirror spacer for the people like me that can't see anything through the original ones except for your own shoulders. Just use some longer bolts and take the rubber from the original mirrors. happy riding!…
Remplacez votre poignée passager arrière par ces obturateurs de poignées. Je recommande le PETG pour cette pièce afin d'avoir une bonne tenue à la température ainsi qu'aux conditions extérieures. Faites une symétrie pour avoir la deuxième…
If this looks way too small in your slicer, please scale to from 100% to 2540%. [Updated] Went back and made a sleeker version. I've not gotten a chance to print and use it but there should not be any changed that affect functionality.…
A spacer/holder for Suzuki sv650 motorcycles with 10mm indicators. I designed these to keep my new led indicators securely in place. There are two versions, a low and a high version. the only difference is how far your indicators will…
Frame caps for suzuki SV650 Category: Automotive
Hier ist eine Blinkerhalterung für LED Blinker für eine Suzuki SV650 Baujahr 2022. Die Aussparungen für die Originalblinker ist zu groß, um die kleineren LED Blinker anzubringen. Daher habe ich diese Halterungen erstellt. Damit kann man…
Swap in velocity stacks for Gen1 SV650 OEM airbox. Printed in TPU 95A. V1.1 Tall stack for use with aftermarket airfilter setup. V1.2 Short stack for use with OEM airfilter setup. No dyno numbers yet.
suzuki sv650 front forks ring, thay are aesthetic and protect the front of the forks I recommande to made them with PETG filament Category: Automotive
suzuki sv650 shift and brake protector I recommande to made them with flexible filament or semi-flexible. Category: Automotive
This is an adapter to fit an H4 led light on a Suzuki SV650. The problem with the stock spring is that the led lamp can't be fixed adequately. Just remove the stock spring and put this adapter! Here's the led I've used…
100% infill, no supports
Will need 7 M3 screws and heat set insert to work.
The rear part is the same as TheMuF version. The front part has been splitted, so you have not to use any glue on your SV650. To me this was a nice design but i like better when the actual installation is cleaner. Category: Automotive
I made this adapter to fill the plug of the original turn signals. This will allow you to mount aftermarket signals. Printed in PETG and has been holding up fine after a few seasons of riding.
Ich musste an unserer Suzuki SV650 Knubbel (2004) die Blinker weiter nach hinten versetzen, damit die Packtaschen passen. Dafür habe ich diese Adapter erstellt, welche die Schräge am Schutzblech ausgleichen, damit die Blinker wieder…
Indicator risers Designed for the SV650S Gen 2. There is a flush mount version (The riser ending at the highest point of the body) and there is a slightly taller version. The Version Pictures is Nothing VS the Flush Mount For Printing I…
Da die Originalblinker nur eine innere Platte nutzen, die auch noch unpassende Löcher aufweist, habe ich diese konstruiert. Die Bohrung ist für LED-Blinker mit einer Aufnahme mit 8mm Durchmesser konstruiert. Bitte daran denken, einen…
Schlauchhalter Hinterrad für Kettenöler, work in progress
Create a clip for securing the SV650 OEM tank prop to the frame underneath the buddy seat. It secures to the frame with 2 tyraps. Maximal width: 5 mm. I would recommend to print with Pet-G, no support needed. Top layer: 3, Bottom Layer:…
This is a mounting plate / an adapter for the Suzuki SV650 (S) First Gen (AV) Models front indicator / blinker / turn signal. I wanted to recess my indicators / blinkers by making an adapter for them and in order to do that I had to…
Interior hole is sized for a ¼" bolt, 1 ½" long was the one used in the picture if memory serves me best. I've upload both .obj and .f3d files for remixing.
I have broken the holder of the blinker light between the light itself and the chassis, so I made a replacement. For Suzuki SV650S 2003
When my friend was swapping his handlebars on his Suzuki SV650, he needed these parts so he doesnt have to file the original parts. Custom handle bars dont have holes for the locating pins, so we needed the same part without pins. But we…
