Liczymy pasujące modele…
Print in upright position, no supports needed. Holes are designed slightly undersized so before assembly, drill through holes with 4mm drill. Designed for M4x30 bolt and M4 nut. 1/8 inch imperial hardware should work as well.
This is a 3d printable Magazines for the Tikka T3X Tac A1, CTR and Arctic rifles. Included are models for a 5 rnd and a 10 rnd version (with the 5 round variant being the more practical choice) which are a dircet replacement for…
A custom bigger bolt knob for tikka T3X. You will need to glue in in place like the original one.
A tool I made years ago but remade now that I know how to actually CAD correctly. This is a tool helps you take the end cap off as well as ‘cock’ the striker so you can put the bolt back in your rifle since the spring inside can be rather…
This is another model to expand the collection of flagazines from DeWZ.
Liked the original and modified it a little
Felt like my Tikka T3x CTR stock was slightly too short for optimal comfort so I designed and printed a stock extension that fits nicely with the stock and recoil pad. Print settings I used a 0.60mm nozzle, 5% infill and 7 walls to make…
Tikka T3x bolt opening tool, for opening the bolt for maintenance. Print with 4-5 wall lines so it can handle the wear from usage.
Ergonomic bolt knob attachment for Tikka T3x bolt. 1x M5x25 cap head machine screw needed to expand the shaft and grip the bolt handle internally.
A single shot block for Tikka T3x tactical. Compatible with CTR magazine model only. ---------------- Material: ABS Supports: NO Outer walls: 5 Infill: Any. I used 40% just to make it heavy.
This single feeder is designed for Tikka T3x rifles and replaces the standard magazine to allow convenient single-round loading directly into the action. It is ideal for shooters who prefer or require single-shot operation, such as during…
Housing for a BME/BMP280 sensor (5V edition) or a SHT3X sensor. Can be screwed down with a M3x6 screw.The base can hold a 8x3mm magnet. Print instructions Category: 3D Printing Summary Housing for a BME/BMP280 sensor (5V edition) or a…
Drop-in cheek riser replacement for Tikka Tac A1. Dimensionally very close to the original, with minor design improvements. Elongated cutout for easier bolt removal. Separate files for right-handed (RH) and left-handed (LH) users. Printed…
This is an enclosure for housing a SHT3x sensor, LOLIN D1 mini Pro and a 18650 battery. The station is used to monitor temperature and humidity values and send them via WiFi to a home automation server. I use Home Assistant and the…
This model is designed to attach to the inside of a safe. Additional to the printed part you will need one or two magnets (20x10x5mm) and some thin rubber to increase friction (needed if you want to store a full magazine!). Slice with an…
I used this to mount a SHT3x sensor to a plastic box. You can get others, but I used https://amzn.eu/d/5XorIlr as the sensor. A dab of hot glue is needed to stop the sensor from rattling. Dupont (Jumper) cables can be run out the back of…
This model is designed to attach to the inside of a safe. Additional to the printed part you will need one or two magnets (20x10x5mm) and some thin rubber to increase friction (needed if you want to store a full magazine!). Slice with an…
This is a 3d printable Mirage cover for the Tikka T3X Tac A1 rifle. it attaches to the fron most half M-lok slot and so doesent influence the freefloating of the barrel. I modeled this around use with my Fortmeier over barrel bipod, but…
Ergonomic bolt knob attachment for Tikka T3x bolt. 1x M5x25 cap head machine screw needed to expand the shaft and grip the bolt handle internally.
This single feeder is designed for Tikka T3x rifles and replaces the standard magazine to allow convenient single-round loading directly into the action. It is ideal for shooters who prefer or require single-shot operation, such as during…
Felt like my Tikka T3x CTR stock was slightly too short for optimal comfort so I designed and printed a stock extension that fits nicely with the stock and recoil pad. Print settings I used a 0.60mm nozzle, 5% infill and 7 walls to make…
A design I made several years back that I'm uploaded to Thingiverse and I'm reuploading here. Its a simple tool that helps you ‘decock’ the striker in the bolt to help you take it apart.
v5 is a new stronger design over the original. Shown here printed in ASA. Uses original mounting points and hardware to mount to factory Ace Target stock.
Tikka T3X target 308 chamber/mag well flag. shows Text "SAFE" in the chamber. utilizes the mag release catch. Made with the snazzy Hex pattern Loop for key chain tag
McLaren 720S GT3X as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
A tool I made years ago but remade now that I know how to actually CAD correctly. This is a tool helps you take the end cap off as well as ‘cock’ the striker so you can put the bolt back in your rifle since the spring inside can be rather…
