Liczymy pasujące modele…
A stylish remix of a Ticwatch Pro 3 stand - The model is separated into 3 models for easier print with minimum support and allows you to print it with two different colors. A wider Base with the company's logo. I provided only STL files…
Rotate Y-axis by 90 degrees Infill: 20% Resolution: 0.28mm Support: yes Block support for text part (and pen holder)
Print this flat with 0.2mm layers. at layer 37 insert BBs to give it ballast/weight
I couldn't find a stand for the TicWatch E3, so I modified my older design to fit this watch. C3: https://www.prusaprinters.org/prints/10936-ticwatch-c2-charging-stand TicWatch E3: (#ad) https://amzn.to/3CCaHko While doing so I created a…
Connect the TicWatch Pro 3 to USB using this dock and pogo pins specified in the attached image.
Respecting author's original model and linking to signpost for Ticwatch Atlas users. A great stand which allows the charge cable to be inserted and makes it a desktop stand.…
Simple charging stand for Mobvoi TickWatch 5. Initial idea came from looking at https://www.printables.com/model/148003-ticwatch-e3-charging-stands so thank you @RT3D for your model Requires the charging cable that comes with the watch…
This is a charging station for the ticwatch e3 to match this charger , which is larger than the original
I couldn't find a stand for the new TicWatch C2, so I whipped this up in Fusion 360. Simple TicWatch C2 watch stand for the original charging base. Update 1/1/2019: Added a second model "v2", increased the spacing around the charging…
This is a custom charging stand for the Mobvoi TicWatch Pro 5 , designed to fit a magnetic cable from AliExpress (example link ). The design is based on the idea of the original stand , but modified to fit this slightly different cable.…
Charging stand for TicWatch GTH. For extra grip glue some rubber under the base or print in TPU Print Settings Resolution: 0.2 mm Infill: 100% for weight Supports: No Rafts: No
I used support under the little tab in the middle. Just be careful when removing it. I cut it with some flush cut pliers. The TPU is surprisingly durable. I have used this replacement for two weeks now and it is working well so far. It…
Charger and phone stand for Mobvoi TicWatch Pro 4G LTE. This is a remix of "TicWatch Charging Stand + Phone Charging remix" by "mordr3d" from Thingiverse (thing id: 3213369), which by itself is a remix of "TicWatch Charging Stand + Phone…
This is a design I quickly created after receiving my new Ticwatch E. You can fit the original charging cable into the stance and secure the wire with some thin 2 sided tape. There is a little hole for a screw to keep the charging…
Mount mooneye with its magnetic adapter cable to a flat surface.
Couldn't Find a watch Holder I like so I made this one. Enjoy!
This is a charging stand for the Mobvoi TicWatch e3. I recommend printing it on the backside. You might be able to get by without supports. I made the slot for the charger a little oversized so an aftermarket charger should be able to fit.
This is a custom charging stand for the Mobvoi TicWatch Pro 5 , designed to fit a magnetic cable from AliExpress (example link ). The design is based on the idea of the original stand , but modified to fit this slightly different cable.…
This is a charging stand for the Mobvoi TicWatch e3. I recommend printing it on the backside. You might be able to get by without supports. I made the slot for the charger a little oversized so an aftermarket charger should be able to fit.
Simple charging stand for Mobvoi TickWatch 5. Initial idea came from looking at https://www.printables.com/model/148003-ticwatch-e3-charging-stands so thank you @RT3D for your model Requires the charging cable that comes with the watch…
Connect the TicWatch Pro 3 to USB using this dock and pogo pins specified in the attached image.
Charger holder Ticwatch Pro 5 for Ikea Skadis board. Uses the Skadis T-Clip system
This is a remix turning the mount for use with the Ticwatch E3. Its a little wonky but it works great for me. Category: Accessories
Use 0.15-0.2 layers, and TPU 80-85A prints well using a standard 0.4 nozzle, but it doesn't print well using the high flow variant prints well using a 0.6 HF nozzle print objects separately
Most of the TicWatch Pro 3 (and Ultra) charging stands require supports to print, and the supports are often difficult to clean out of the bean-shaped cavity where the actual charging connector goes. Ron did an excellent job remixing…
I couldn't find a Watch stand for my TicWatch Pro, so I created one. you can use cable tie if you need I use a bit of blu tack at charger back Print Settings Printer: Mini Kossel Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20%…
TickwatchPRO only i designed this so i would stop losing the actual charger for my watch, (many many cables to sift nightly) you simply snap the charge base into this mount. the included picture was an accidental nice fit, and actually…
Modified the base of Ron's TicWatch Pro 3 stand to incorporate it into the CuTop base and modular system. Had some trouble printing the head with the supports. It needs supports to print, but I keep getting supports inside of the holes…
Many thanks @Ron for the original model ! My modifications are: added slots for 1 eurocent coins to the bottom of the base; up to 18 coins in total separated wire clips from the stand to print them stronger removed the mobvoi logo from…
My bedside was getting cramped so I designed this so I can use the watch mount that I already had by remixed by Liron and have it above the Echo Dot (4th/5th gen) I didn't intend on uploading since its pretty specific but it shouldn't be…
Hi, this is my version of Ticwatch S&E stand :) Mine was printed on old Anet A8 0,1mm layer 1,6mm wall thickness (0,4 nozzle) 20% infill Thumbnail provided by David Wong :)
The original strap/band holder for my TicWatch E3 finally broke, so I designed a replacement. I printed this in TPU in order to keep it somewhat flexible. I also moved the little plug that hooks into the strap's holes to stop it from…
Hang Ticwatch pro charger on the wall to save your desk space. Print Settings Printer: East3D Gecko Rafts: No Supports: Doesn't Matter Resolution: 0.2mm Infill: 25 Filament: Kexcelled PETG Red Post-Printing Use 3M double-sided adhesive…
Hang Ticwatch 2 charger on the wall to save your desk space. Print Settings Printer: East 3D Gecko Rafts: No Supports: Yes Resolution: 0.2mm Infill: 25% Post-Printing Use 3M double-sided adhesive tape to stick the dock to the wall.…
![TicWatch 3 Band [Alpha]](https://media.printables.com/media/prints/31e55930-9e1e-497e-bfcc-a864e91307c5/images/12262803_a25de2f4-8664-41d0-bb52-050b5931a61e_5609a686-446b-484e-ab3c-1554f3d98a28/tic-watch.jpeg)
