Liczymy pasujące modele…
Cardholder for toploader or multiple sizes of tradingcards, slightly angled, for diffrent layer heights,no massiv infill
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
storage for 25 toploaders. The model has a cutout on the front to easily access the sleeve and to see how many are inside the box. If you have cards in the toploaders, there is a lid to add additional protection from light/UV damage and…
DESCRIPCIÓN DEL MODELO 3D Descripción: Este es el archivo .stl de mi caja de mazos para los juegos de mtg. Cualquier reventa o reproducción de este modelo sin mi consentimiento está prohibida. También necesitarás dos imanes de 8mmØ x 2mm…
My son wanted a Toploader card holder that resembled a pokeball which meant painting the cover in the Slicer. This wasn't easy as it was a single part. So I used Fusion 360 to create separate parts for the different colours which made…
A storage holder for your Sleeves, Toploaders and semi-rigids!
Rinjamin's model is great, I just had a hard time fitting all of my tokens inside. There's a couple of versions, starting at 5mm wider (which is plenty wide for my deck + tokens), up to 25mm wider, in increments of 5 mm.
Toploader Trading Card Frame Pallet Style is an easy to print frame that you can show off your cards in a toploader! Use a command strip and hang on wall, have fun! NEW added a way to print flat in half the time! .gcode file is attached.…
I really liked this design but it didn't fit the hair ties I already had, so I shortened the hair tie paths to fit them better. The hair tie paths are also cleaned up to remove an overhang in the middle. I added a chamfer to the top and…
This is a solution to display your favorite Trading Cards with a Toploader (i used Ultra Pro) inside the ikea picture frame called “SANNAHED”. (https://www.ikea.com/de/de/p/sannahed-rahmen-weiss-00459116/) These Frames have the perfect…
Toploader holder for kpop photo cards or other photos with space to personalize
I needed a safe wall mounted frame for some of the trading cards of my kids so i made this one. It fits perfectly when using the Ultra-Pro regular toploader cases. On the back there is a hole for mountig. Print it standing upright with no…
This deckbox is for EDH/Commander Magic the Gathering decks and can hold 100 double sleeved cards plus some extra. It has a slot for a thick toploader sleeve in the front. Best way to open it is to push the top forward from behind, see…
Descripción del modelo Este modelo 3D consiste en un marco diseñado para exhibir cartas de TCG dentro de toploaders , ideal para coleccionistas y entusiastas de juegos de cartas como Pokémon, Magic: The Gathering o Yu-Gi-Oh!.…
Simple and quick to print little display for your TCG toploaders to go into pegboard. These do not need to be printed strong at all. default setting will be more than enough with supports on buildplate only. They take 2x toploaders - i…
I remade yet another spool holder for the SKADIS organization system. Credit for the base design goes to @Nitek (https://www.printables.com/model/136877-ikea-skadis-spool-holder-optimized) I struggled with bending the side parts to insert…
Wall Display for any game card or photo that can be fit in a standard toploader The hole size its for a 1 inch nail.
This box holds about 50 Ultra Pro Toploaders comfortable. "Ultra Pro Regular 3"x4" Toploader" I have some generic toploaders too and they fit just the same. You can provide the box with a label and they are stackable so easy for…
A mod for the Ankermake M5 to enable it to pull filament from above instead of through the Reverse Bowden tube. This also brings the runout sensor closer to the printhead reducing waste.. You'll need several M3 screws and headset inserts.…
This is just a very simple case for you to be able to slide a TCG Toploader into for extra protection. I made it for people who use letter envelopes when posting. I myself feel that cardboard is not enough and can be bent. The inside of…
This stand is for holding a single trading card from many of the most popular trading / collectable card games. It fits cards from Pokemon, Yu-Gi-Oh, Magic the Gathering, Lorcana, Star Wars and many other cards of similar sizes. It holds…
Multiple toploader holders for your cards Check the one you want to print before printing. The version increase does not mean new version, just a different one My toploader size is roughly 100x77
Magnetic Toploader Deckbox Hello, this is my custom deckbox design that I use to store and transport my commander decks! My goals while making it were: to not be much wider than your typical deckbox a strong magnetic lid that would be…
Show off your Pokémon cards in style with our Toploader Card Stand! Perfect for displaying your favorite graded or sleeved cards securely. Download and print your own stand today! Additionally, the logo can be printed separately without…
Comfortably fits dragonshield or similar sleeves, and has the height to fit penny sleeves that I use for my tokens. When taking the lid off, grip both sides of the lid and pull up one side at an angle for the easiest time opening. Before…
I wanted to put a couple of my cards on my shelf but didn't want to have them just leaned up there, so I made this :) It fits a standard top loader which will give it a layer of protection from dust and other stuff, also makes changing…
Here is a really cool top loader storage box that I made. I use this to store all my really nice pokemon cards in. You can either print the little box that holds 10 toploaders or the larger one that stores 25. You can also print the clips…
Card hanger for hard Toploader sleeves https://amzn.to/3ItpmoS These are the toploaders I use. works great.
Fits 3"x4" toploader card sleeves Need 6x2mm magnets x4
This is just a simple stand that I created because I couldn't find one with all the features I was looking for. Those features being: a cutout in the front wall to show as much of the card as possible, a support on the back to help…
This is the toploader picture frame! This frame is magnetic, so that you can display your favorite or most valuable cards in style. The frame firmly holds a toploader, just make sure to center the card within the toploader before fitting…
Transform your valuable trading cards into true display pieces! With this custom-designed 3D printed grading frame , you can showcase your cards in a Toploader – just like professionally graded slabs (PSA, CGC, BGS & more), but with your…
This will fit a toploader pretty well without being hard to remove. Card will be mostly centered. Printed at 0.2 layers, 15% gyroid infill. Additionaly, I use a 5mm brim with no seperation gap, snug supports with a 0.1mm gap (you may need…
TCG Card Slab Frame – Display im PSA-Stil für -Karten Dieser 3D-druckbare Kartenrahmen im PSA-Stil wurde speziell für Sammelkarten entwickelt und eignet sich ideal für Pokémon, Yu-Gi-Oh!, One Piece, Magic: The Gathering und weitere TCGs .…
Diese hochwertige 3D-gedruckte TCG Display Box ist speziell für Sammler entwickelt, die ihre Karten stilvoll, geschützt und stabil präsentieren möchten. Sie kombiniert drei Funktionen in einem Modell: ⭐ 3-in-1-Design Front-Display-Rahmen:…
My son wanted a Toploader card holder that resembled a pokeball which meant painting the cover in the Slicer. This wasn't easy as it was a single part. So I used Fusion 360 to create separate parts for the different colours which made…
Edit: Added Version 2. Version 2 fits on top or the bottom of the deck box and it dos not matter in which direction it is attached. I recommend to use version 2. Just print the file 2 times.
This deckbox lid uses the same magnets as the original model. You will need to set up the colors, but each part is named for what color it should be to make it easier for you. The mana symbols are only 0.8 mm thick, so you could manually…
Wall Toploader Stand 2x3, perfect for toploader and connecting artworks!
A storage holder for your Sleeves, Toploaders and semi-rigids!
These will require some supports, orient the FDM prints so the top is on the bed and support the overhangs. The resin print should be oriented so the side that faces out of the system is pointed to the fep film for the best quality. This…
A minimal frame and stand for trading cards in toploaders with a precise, secure fit and no added bulk. Currently only testet with Ultra PRO toploaders. Just added v2 that improves the fitment a bit. Tested Print Settings PLA 0.4 mm…
This is an alternative back for the CardFrame | Toploader Card Frame & Stand Tested Print Settings PLA 0.4 mm nozzle 5% infill No supports needed
Rinjamin's model is great, I just had a hard time fitting all of my tokens inside. There's a couple of versions, starting at 5mm wider (which is plenty wide for my deck + tokens), up to 25mm wider, in increments of 5 mm.
A simple frame designed to hold an Ultra PRO toploader (3x4 inches). Requires 4 countersunk M3 screws, with a max length of 6mm. I've included 4 different sizes: Hitchhiker's Guide - 62mm x 87.5mm, pictured Pokemon - 62mm x 85.8mm…
una mensola semplice e leggera per esporre le vostre carte da collezione
Tandemaus and Maushold grew on me. Made a little cute card holder for the card i pulled. One mouth close, one mouth open.
Holder for 8 Toploaders, to display your favorite TCG cards. It supports standard Toploader size (7.5cm x 10cm - 3" x 4"). Cards are displayed at a 22.5° angle. Material : PLA Infill: 20% Layer height : 0.2mm Supports: no
Improvement on my original toploader storage box model now to contain a lip around the bottom so that they can be stacked and thicker walls.
The same as the original design, but for commanders without a toploader. Also rounded the window corners.
Remixed from another card holder to hold Semi Rigid card sleeves & Toploaders I printed a fuzzy outer edge on the top which was a nice effect On Prusa Mini print without skirt or it'll be too big
Designed so that you just drop the toploader into the top and its auto centered and displayed perfectly. Prints in two pieces that fit together without glue. Outer Frame I like to print with a single tree support on the top edge overhang.
The ShowCase CardStand Toploader Edition is a high-quality trading card display stand, specifically made for showcasing cards in toploaders. This model lets you exhibit your prized cards in a secure and elegant manner. Its sturdy design…
The QuickDraw Sleeve & Toploader Dispenser is a premium storage solution specifically designed for efficient organization and dispensing of your trading card sleeves and toploaders. Its innovative design enables hassle-free storage and…
This is a display stand for your UltraPro toploaders that I made based on the design of 0d7i0s to display some of my favorite Pokemon trading cards. The size of the model is perfectly adapted to the size of the toploader.
Hey!!! This is a Pokeball Rigid Toploader Display Stand (78.5mm) that I designed to proudly display some of my favourite Pokemon trading cards. If you print my stand please send me a picture on here or my IG page, id really like to see…
This is a modified version of the original deck box to fit Ultra Pro 3" x 4" top loader card protector for the commander card and slightly increased in size to accommodate Dragon Shield Matte sleeves for the rest of the deck. The…
Parameterized Card Stand for Ultra Pro Toploader This is a fully parameterized Card Stand for Ultra Pro Toploaders to store your TCG Cards. The included STL-File contains a 0.2mm tolerance for the Toploader dimensions. You may have to…
Display your favorite cards cards with this frame and stand for your top loaded cards. The fit of the cover and frame was optimized for the settings on my printer, but the cover can be scaled if the fit isn't perfect. The toploaders that…
Portable small wallet for cards. No supports needed! Backstory: This model was designed after I encountered some general wear with my Slim Parametric Wallet from Mildly_Admirable . After browsing for a while I came across Puffs Ridge by…
I needed a way to join a set of Pokemon cards to put into a frame and couldn't find anything on here, so I made it myself. I wanted this to be modular, so as many of them could be joined together in any way possible for differing sets. My…
Toploader Trading Card Frame Pallet Style is an easy to print frame that you can show off your cards in a toploader! Use a command strip and hang on wall, have fun! NEW added a way to print flat in half the time! .gcode file is attached.…
This is a box to hold UltraPro toploaders. Sure there's boxes you can buy online that are longer and hold more, but why do that when you can print it? Walls are thick because on the thinner wall test I did the walls warped. This model is…
I didn't see any models for displaying anything other than one touch or standard toploader stands, so I made my own for 5x7s. I have printed and tested the verical one with UltraPro and BCW 5x7 cases. However I have not had a chance to…
I've designed a frame that allows you to display your favorite card. The frame is easily changeable thanks to the magnets behind it. It requires a 6x3 magnet to securely hold both pieces together and a toploader, where you can put your…
Simple backplate replacement, allowing for either a mini-din or megadrive/genesis 2 socket to be installed. I used this one, because it has a nice breakout board with it (did have to file to top flush a little bit);…
This is a modified version of the original deck box to fit Ultra Pro 3" x 4" top loader card protector for the commander card and slightly increased in size to accommodate Dragon Shield Matte sleeves for the rest of the deck. The…
Hi, this Stand is designed to hold toploaders, I use the one from Ultimate Guard. Please contact me if you need another size e.g. for Baseball Cards. It has a 5° tilt to the back and is held by a small lip at the bottom front and the…
Came up with this model as an easy way to display 3 toploaders. To get it to in fact hold 3 toploaders, if your bed size is less than 240mm in any direction, it must be printed on its small face. Do not scale down the model. For print…
Came up with this model as an easy way to display 3 toploaders above of my original stand. To get it to in fact hold 3 toploaders, if your bed size is less than 240mm in any direction, it must be printed on its small face. Do not scale…
This is a top loading sleeve/case for TCG cards. There are 2 different versions, standard size and japanese size. I have tested the standard size with Magic cards sleeved with Dragon Shield and it is a perfect fit. I have done the exact…
I was sending some baseball cards across the country, I had no cardboard on hand, but had a bunch of spare leftover filament. Modeled this up in Fusion and printed a few out and shipped them in a PWE. I removed the indexes as they're not…
Toploader Card Storage Box. Do you put your cards in the Toploader card sleeves? If so this box will hold 10 - 15 toploader card sleeves. Great way to protect your valuable collectors cards. This was made with Fusion 360 and was printed…
I use a small glob of poster putty to stick it to the wall.
Print hole going vertical with brim infill >25% layer height doesn't matter, pictures printed with 0.2 layer height
This is a fairly straightforward storage box designed to hold cards in toploaders and protect them even more from dust and the sun. The front features the Enchanted symbol from Disney Lorcana. I print this with .2 layer height and no…
A stand i made quickly because i needed a stand and wanted to upload something.
