1362 modeli
This is a reconstruction/remix from the original one that you can find on thingiverse here . Please, for any issues contact me or leave a comment, I will replay as soon as possible!
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop No supports, scale up any size. Seems to work on all size & types of bags. So simple and effective it may surprise you. Want MORE? Visit the CHIP CLIP COLLECTION
A low poly remix of McGybeer's Cute Mini Octopus, one of the best articulated designs that exists. This model can be printed without any supports, although you may want to use a brim if you don't have very good bed adhesion. Like this…
All Things STL wine bottle holder: Does require 2 small tree supports. There are two different models one for 200x200 plates and one for 220x220 plates. If you have a Prusa (or this size printer) print the 200x200 If you have a larger…
Layer Height- 0.2mm Print Without Support PLA Infill Density- 15%
A mix with octopus and sonic , print with painted support only under the hair
Cute octopus with eyes, articulated and printed without supports. It is designed to be printed at once. It is not necessary to use supports. V2- fixed problems with model, re-design model.
Easy to make a cute Octopus keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
This is a magnetic breakaway adapter mainly for the octopus/backup regulator on a normal (non-DIR) setup. I designed it to be as compact as possible while still accomodating a reasonably strong magnet. The mechanism should connect quite…
Octopus/Kraken door handle for design fans. This remix is based on https://www.thingiverse.com/thing:4836898
I created a BIGTREETECH octopus holder for Voron Switchwire printer Vytvořil jsem držák BIGTREETECH octopus pro tiskárnu Voron Switchwire
be careful when peeling it off after printing. It is made thin to maintain flexibility adaptable to different supports
A bath toy octopus where you can toss rings around the arms (photo of model is printed at 10% with supports just to test printablility)
Allow the model to cool thoroughly first, otherwise there is a risk of damage when removing it from the mat.
I recomend petg for better first layer adhesion, but it is up to you.
PARA IMPRIMIR ESTOS MODESLOS SE DEBE TENER CONOCIMIENTO BASICO DE IMPRIMIR DOS COLORES EN UNA SOLA CAPA CON UNA IMPRESORA 3D CON UN SOLO EXTRUSOR. O DESCARGAR LOS ARCHIVOS G CODE E IMPRIMIR EN EL ORDEN ENUMERADO Y RESPETANDO EL CAMBIO DE…
Odvětrávací otvory do hardtopu na korbě, slouží pro odvětrání tepla z prostoru (u nás kvůli psovi). Je to dělané na stěnu 3,5mm při použití podložky i méně. Vnitřní průměr 76mm, venkovní 100mm, venkovní výška 26mm.
Cute mini Octopus , the ORIGINAL! It's designed so it can be printed at once. No assembly or supports required . Many different STL files, with straight or spiral tentacles, both with and without included support. UPDATE!! v6 fixes some…
28.12.2025 / New Multipart Version (Leg Plug In System) 🆕What’s new? The octopus legs can now be printed separately without any issues. Since many people had problems with bed adhesion when printing the legs, this should now fix that…
Remix of the popular Cute Octopus with a shorter nose for an easier, support-free print.
This is a remix of fumbucker's smooth rocktopus from Thingiverse.
Fidget toy mashup of the “Print-in-Place Fidget Ring” by Makkuro, and the “Cute Mini Octopus” by McGybeer. The inner ring spins, with articulated tentacles attached to the outer ring. Updated V3 - Improved fit of inner ring, and flusher…
This is a remix of the awesome looking OctoGlasses from Ramalama2 which fixes some issues in the original design. Design There are the following changes: The terminal cover on the left side of the board is now fully accessible The fans…
Changes to original model scaled up the model by 120% in Z removed/changed nose (now supportless printable) The difference can be seen on the second picture.
Create your own dragons – directly in Blender! Stop downloading pre-made models. Become a designer yourself! With my modular dragon kit for Blender, you can transform your visions into 3D models. I've done the hard work, precisely…
Octopus Wine Bottle Holder 1 Color AMS, MMU or, ACE Pro PLA Basic Purple Bambu Labs .3mf Included Commercial License Available For commercial use: https://www.patreon.com/c/atro3dprints/membership Special Thanks to PCBWay! This project is…
This is beauty at it's finest! At .2 mm layer height, 15% infill, and 55 mm/s infill, This Prints in 1 hour and 39 Mins.
Print the model with a collar of at least 3 mm, or stick it with glue.
My 11yo daughter saw a Rocktopus on a random Youtube video and asked me to print her one. I elected to scale it up to 150% so the links have more diameter and last longer. As well, I removed and replaced the head with some more neck and a…
Note: This is a reupload of DrLex's model, unmodified. Go to Thingiverse to give him credit! Funny Flexi Octopus *3D printable flexible articulated octopus (formerly thing:3531563)* License Creative Commons - Attribution Attribution This…
Tips for printing: Filament: PLA (only use PLA) Supports: No! Layer height: 0.16mm (optimal) (0.2mm also works) Wall loops: 3 Infill: 15% Seam position: back Wall generator: - Detect thin walls: - Brim: No! BuildPlate: Smooth (Textured…
Want the same results? Click here to find the filament I use for results like these. Print-in-Place Articulated Octopus **Might become paid depending on popularity** This fully articulated, single-piece octopus model is designed for…
For more flex I made 3 hollow versions of the octopus. - This also results in a shorter printtime than the original. Thanks to @DiabaseEngineer for the design.
/!\ Print with support (Tree) and brim /!\ V2 with Tentacles better laid on the build plate from @Arcayenneist advice Inky the Playful Octopus This octopus is a delightful addition to any collection. Whether you’re looking to decorate…
The Rocktopus is one of the funniest 3d models I've ever printed. NO SUPPORTS NEEDED Might want to use a brim or raft for better bed adhesion. I just used slower first layer speeds and it printed fine. This is an original design by the…
The author's model was reduced in quality compared to the original octopus model, so I reworked the model using the original parts. I also added five additional tentacle segments because I had some extra space on the bed. Quick tip: Print…
ℹ Tips for printing: Filament: PLA Supports: No! Layer height: 0.16(0.15)mm or 0.2mm Wall loops: 3 Infill: 15% Seam position: back Wall generator: - Detect thin walls: - Brim: No! BuildPlate: Smooth (Textured Build Plates not…
🐙 Flexi Octopus – Print-in-Place Edition A cute articulated octopus designed to print in one single piece with no supports required . All tentacles move smoothly straight off the print bed, creating a fun and satisfying flexi motion.…
Źródło oznaczyło ten model jako treść 18+.
I wanted to combine 2 cool models that I have not seen yet but I thought would be funny. Printed at 50% scale .20 mm quality Skirt adhesion no supports
Just a cute octopus. i needed a brim, but no supports needed 0.2 layer height NOT my model, but just want to share it here
The original articulated octopus is extremely hard to print, this one creates rings that act as a partial brim.
Create your own dragons – directly in Blender! Stop downloading pre-made models. Become a designer yourself! With my modular dragon kit for Blender, you can transform your visions into 3D models. I've done the hard work, precisely…
Remix of this famouse model: https://www.printables.com/model/178035-cute-mini-octopus. It doesn't need any support.
Most Rocktopus have a very rough transition between head and body. I rebuilt this Rocktopus from the original Dr. Smolder Bravestone and the latest version of the mini octopus and made a nice smooth neck. The 3MF file is from Bambu Studio…
The Alktopus - Your party partner with eight arms! With the Altopus you can elegantly serve the next round, please your friends and all without spilling anything. Whether you're at a beach party, celebrating your birthday, or just…
We all know that trend going around where we're sticking the famous people's heads on the articulated octopus, so why put the all-time best animal on there as well? Introducing the Capypus! It was made from Cute Mini Octopus by McGybeer -…
This OctoOctoRocktopus has 57 heads or should I say Pentacontaheptagon . This is a masterpiece. DOWNLOAD NOW! Print large since heads become very small.
SKULL.stl @ 1.4 million triangles (in case you want to print BIG) SKULL-reduce.stl @ 700,000 triangles SKULL-agressive-reduced.stl @ 300,000 triangles
Using the Multi-Material 2S I made a colored octopus from the Thingverse design: https://www.thingiverse.com/thing:3495390 There are two versions of this octopus, one colored by segment and one colored by layer. There is also a lizard…
The octopus features a two-tone color scheme. The top of the head (mantle) and the upper sections of the legs are white, while the underside and the lower segments of the tentacles are a chalky blue.The figure has a smooth, bulbous head…
Meet the brand-new Cute Octopus! 🙌 A really adorable little creature — whether as a keychain to keep by your side or as a cute fridge magnet to brighten up your kitchen. Features: Separated eyes Multicolor version No supports required For…
Printed with a small painted support under the nose of the octopus and painting the seam up the back (Otherwise for some reason the seam goes up the front). .20 layer height, Quality setting. Probably would work with other settings just…
This is intended to be a somewhat realistic looking flex octopus. Each tentacle is made up of twelve segments. Bed plate adhesion can be a challenge. A textured plate can really help. I consistently print it in PLA on a textured plate…
creeper octopus print in place
Another in the series of models with movable joints . This time it is Cute octopus . It has eight arms, each with eight movable joints. The head rotates. I recommend printing with a layer height of 0.15 mm, use a more flexible PLA so that…
Dimensions (LxWxH) 82,9 x 105,5 x 39 mm (100% scale) Basic information The ring octopus has four tentacles dedicated to holding your rings, small jewelry, earrings, or basically anything else you desire. It's awesome for protecting your…
⚡ CLICKFLOW – IMPORTANT INFO 🔧 Assembly Note: This model was tested using a blue mechanical keyboard switch . For a more secure and durable assembly, I recommend using a small amount of glue on the connecting parts to keep everything…
LRS-200 : M4x5-8mm BHCS, SHCS x4 *8mm bolts may too long, be careful. RS-25 : M3x5-8mm BHCS, SHCS x 2 *8mm bolts may too long, be careful. raspberrypi : M2.5x5mm or longer BHCS/SHCS x4, designed for considering self fixation without using…
Old Treasure: Mixed with Meshmixer 2019 from “Cute Mini Octopus” & “More Realistic Ball-Joint Articulated Octopus” Thanks to McGybeer & Stanos Happy Printing 😉👍
A remix of the Rocktopus by UNION3DPRINTING . Improved quality over the original Rocktopus. I've smoothed out the seams between where the head and body connects, resulting in a better looking print. Supports are recommended under the…
Shrek and an octopus had a child... HIS NAME IS TOPUS!!!
This is a remix of a remix. I took this model https://www.thingiverse.com/thing:3551422 from thingiverse and repaired the mesh. I also fixed some unnecessary overhands and added a semi-hollow version that's kind of like a finger puppet.…
each tentacle consists of 7 links каждая щупальца состоит из 7 звеньев
This was remixed from tatami's Cute Mini Octopus with ring (remix) I split the file for a two color printing and the models have been cleaned up so they are manifold, this avoids problems with certain slicers. Be sure to check out all my…
20% infill small layer height print in place
This is original model of rocktopus ,no supports needed . Use a raft if you are worried about the small contact points.
Remeshed the model and properly corrected and shaped the neck to look properly part of the rest of the squid update: Added lower poly/smaller file sized versions for people with not so good computers/internet. They are all the same…
Remix of the alktopus. Changed the bottom part to fit Shot Glas with approx. 35mm in Diameter and 55mm in height.
I modified the pumpkin to light, you can put more of them next to each other like a chain. There are 2 hats.Lantern1 fits perfectly on the headLantern2 is larger than in the photos and creates a cap
This is a cute mini octopus keychain Category: Toys & Games
Mini octopus but with much longer tentacles. I am planning to make them even longer, but bed size limits their length. Second photo for comparison with the original mini octopus
This well known articulated octupus model is prety popular, but it was missing something..... A hat.
Chobotnice ve stylu Hexa (tisk na Bambulab A1 mini cca 1:50h )
Just a bunch of random Octopus tentacles
Update! Modified model- After the comments, I increased the tolerance even more for freer movement of the octopus joints Armored Robotic Octopus Recently I like to create models with movable joints printed by Print-in-place, here I…
An easily assembled articulated octopus. I recommend using Super Glue to attach the bottom plate which holds the tentacles in place. In order to achieve the honeycomb texture on the tentacles i told Prusa Slicer not to print the top and…
License: Free for Personal use only For commercial license & exclusive models visit: https://www.patreon.com/FluffyTails (Instant access to 44+ models) If you print the SMALL KEYCHAIN version in the .3mf file with H = 40.67 (excluding…
No supports, raft not needed any pal has worked, you can try other filaments
Here is a remix for the well known “cute mini octopus” with a crown added supports are only needed for the nose
Instaid of the millionth itteration (or reupload) of McGybeer's (awesome) cute mini octopus I started from scratch and came up with my own articulated print in place octopus. This one has suction cups and a more detailed skin/shape. I…
I paused at line 45 and changed colour. I painted the eyes, bow, nose and whiskers. Printed using PLA Printed without supports.
This model is designed to be printed without supports, saving you time and material. The octopus features articulated tentacles that allow for a range of movements and flexibility, adding a playful, interactive element to your prints. The…
Reprint of the McGybeer mini octo
Made the longest octopus that would fit a 220mm x 220mm printbed. This model needs very long to slice (1-2min for me) so be patient. Its also a pretty hardcore benchmark since the small segments tend to get ripped of the build plate so…
the familiar octopus as keychain with nose support
Articulated octopus-style ring with eight flexible tentacles and a smooth central loop. Each arm moves independently, creating a satisfying fidget motion and an eye-catching organic shape. Designed to print in one piece, fun to…
I love this design by mbrady because it sends air where you want it, rather than randomly blowing it away like the top down models do. I oriented my Octopus so this blower shoots the air straight out the back of the base. I used a nice…
A minimalist octopus-shaped tealight holder. A real eye-catcher in your living space. Quick and easy to print. Fits standard 40 mm tealights. (Freely scalable) The standard dimensions are 160 mm x 131 mm x 83 mm . Printed with the…
Our famous hero!! Standard print settings, no supports needed (0.2 layer will do, finer is better)
Lego compatible flexible octopus! Just had to do it. Printing Bed adhesion is important, if you keep having trouble a raft could work. Tested at 0.2mm layer height. Collection of lego compatible stuff Print in place hinges Print in place…
My Iron Spider needed a villain. Enter: Doctor Octopus aka Doc Ock. Leader of the Sinister Six, archenemy of Spiderman. All parts print without supports or brims on my printer. Tentacles Each tentacle is a series of ball-socket links. I…
Had to upload as a 3mf as the stl wouldn't save right out of the slicer where I edited the model. I have printed it on my modified Ender 3v2 with a brim and it prints fine. The clean up isn't ideal, but it works. Tried my Prusa MK2S and…
Mount for the BigTreeTech Octopus V1.1 board using a DIN rail. Options for 92mm and 120mm fan. Prints without supports. Printed in PETG at layer height 0.2mm. I mountend the Octopus with M3 brass standoffs. Fan Mounts are designed for M3…
