Liczymy pasujące modele…
I added a set of trunnions to each side of the amplifier and a stand. The trunnions (pivots) are close to the center of gravity of the assembly. This means the tightness of the screws isn't as important. I used rubber washers to aid in…
I made several variations of the original design by haphazardlynamed. Also, it requires an M5 nut and M5x16mm bolt (the original post says 10mm but that was too short). I've added versions that are Aeon Pro compatible Made for 17/32"…
I broke the trunnions on my Racktime SNAPIT basket and printed these as replacements. For maximum strength I used these parameters: Material: PETG Print Speed: 30 mm/s Wall Perimeters: 15 Temperature: 235 °C I was concerned it wouldn't be…
Barrel adapter for the Dart Zone (Adventure Force) Nexus Pro allows the mounting of a longer protruding barrel tube (16mm) aluminum barrel hardware needed: 5mm x 10mm bolt, head diameter less than 9mm 5mm nut with 8mm wrench flats…
Seals for the bottom of the spitfire trunnion that leak, clean trunnion with contact cleaner to remove any oil grease etc. coat inside of seal with silicone and slide on, allow to dry. printed in TPU
On the Matthias Wandel 16" bandsaw, the carriage bolt to lock the trunnions need a small block. Normally this is made out of wood but the ones I made had poor grain direction and broke easily. Great use case for a 3D printed part instead.…
This is a faceplate / trunnion for a Motorola XTL1500 to hold it into a 10" rack. I based this on the 10" rack that many homelabbers are using for Ubiquiti gear. I thought a 10" rack would be perfect to hold two way mobile radios. The…
This is a faceplate / trunnion for a Yaesu FTM-100D to hold it into a 10" rack. I based this on the 10" rack that many homelabbers are using for Ubiquiti gear. I thought a 10" rack would be perfect to hold two way mobile radios. This…
The cast aluminum detreated and crumbled. I am using these to get buy until I can get metal ones in. I think they will work fine in the horizontal configuration of the cut plate.
Concept CAD collection for a DN100 PN40 trunnion-mounted ball valve with an ISO 5211 actuator interface. Includes the full assembly, cutaway, valve internals, and sphere/stem unit. STEP files are provided for CAD review and educational…
This is a faceplate / trunnion for a Motorola XTL1500 to hold it into a 10" rack. I based this on the 10" rack that many homelabbers are using for Ubiquiti gear. I thought a 10" rack would be perfect to hold two way mobile radios. The…
My remix of Noctua's fan amp but scaled for 140mm fans. Also remixed the Trunnion Mount for the new fan size and added mounting spot for a USB-C input PWM controller dial. The screws into the fan amplifier and M5 heatset inserts and then…
3d printed replacement part for Hoover U5269 vacuum part number H-36131118
Background A simple Remix that reduces the hole Sizes to use instead of the originals M5 inserts I only have M3 inserts laying around and Voron-spec seems to become a new standard so why not adapt Print Settings Material: PLA or PETG…
