Wyniki wyszukiwania: tstop

Heartstopper Bookmark

Heartstopper bookmark I made for my daughter as I couldn't find any on here. I'm sure someone can improve it but she loved it anyway!

Footstop

Basic footstop used for downhill longboarding.

PitStop FanCover

To cover the colorful Noctua Fan or the PitStop-Extruder and bring it back into the color concept.

Holder for a door-windstopper/Halterung für Türzugluftstopper

A model I made to hold the windstopper, so it goes along with our door. It is made for a windstopper with a diameter of 85-90mm and a doorwidth of 45cm. I added a bit of felt so it could slide along our hard floor. Feel free to remix the…

Shortstop - 3D Printed TF2 Prop Gun

I thought this weapon looked neat, so I decided to make it! I took the model from the game files and split and modified the model. The break-action and trigger were also modified to move. If you'd like to do the same to one of your…

Fully 3D printed LTD Stirling Engine (ProjectsToPrint)

This is a fully 3D Printed Stirling Engine made by New Zealand ProjectsToPrint (now defunct). It only requires a printer, printer materials and a few basic home tools and materials to make. It is powered by hot and cold water. This does…

Zigarettenbox für Selbststopfer

Zigarettenboxen mit verschiedenen Stückzahlen für Selbststopfer. Unterteil gedruckt aus ASA, Oberteil (Deckel( gedruckt aus TPU.

Vierkantstopfen | Square plug square tubes

Vierkantstopfen 25mm für vierkant Stahlrohre | Square plug for square tubes with 25mm

Dichtstopfen M25x1,5 / Seal Plug M25x1.5

Einfacher Dichtstopfen für eine 230 V Außenanschlussdose mit M25x1,5 Gewinde. Ersetzt die mitgelieferte Kabeldurchführung / Simple sealing plug for a 230V outdoor plug socket with M25x1.5 thread. Replaces the originally delivered cable…

Wacky Races - Penelope Pitstop & Peter Perfect - 1968-1969

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Wacky Races - Penelope Pitstop's Compact Pussycat - 1968-1969

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

TurboSnail Part Cooler for Pitstop Extruder

Introducing the TurboSnail Part Cooler for the Pitstop Extruder. Expect this to perform on part with the Prusa shroud given a moderate bump in fan speed to compensate for the added restriction. The idea is to have a smaller, more directed…

PitStop Linear Rail Adapter

This is a modified version of the PitStop Extruder (created by Mihai Designs) backplate + Adapted-Revised-X-Axis to allow for the use of linear rails instead of smooth rods + LM8U bearings. Bill of Materials: Parts from original revised…

TORVOL QUAD PITSTOP BACKPACK PRO - Nameplate

This is a nameplate base for the Torbol Quad Pitstop Backpack pro. Please print with flexible material or TPU for better results. Use any 3d file editor to add your name.

PitStop - MK3 / MK3S / MK3S+ X-Axis Linear Rail Guide

1x MGN12H Lineární kolejnic 350mm 4x M3x5mm countersunk screws

V2.4 A1 Silicon Wiper & Sheetstop

For Beacon or Carto it is highly recommended to use a silicon wiper. This is my version Use a A1 wiper pad and glue it to the printed part. Secure everything with 2x M3x8 and some t-nuts. Use the decontaminator bucket to collect the wiped…

Door Limitstop / Türstopper/Anschlag

I printed it with a Prusa Mini, Nozzle 0.6 mm and variable layer height with TPU in about a hour. At the bottom I added some small infill to make the bottom more stiff, otherwise this thing is empty to make it more flexible. You can stick…

Riptide Slab inspired footstop

Downhill longboard Riptide Slab inspired footstop. For best results, print in TPU. Use 15 to 16mm washers on top and bottom for mounting.

RHD CS Nozzle Fan (Part Cooling) for Prusa Mk3s PitStop Extruder

A remix of the RHD CS NOZZLE for the pitstop extruder. Angle and attachment of radial fan was altered. A spacer was created to adapt from original mounting holes. Printability was improved (I think) by an addition of a fin inside the…

Vierkantstopfen

Simplet Vierkantstopfen, da zu teuer.

Pitstop and Pint Pin-Up

Mosquito Pitstop

This allows anyone with a Prusa MK3 or MK3S to mod their printer to use the Pitstop for better cooling, and the Mosquito Hot End (smaller, lighter and reliable). With this design you can replace the nozzle without taking anything apart. I…

Tütstopper Maulschlüssel

Ich habe einen einfachen Türstopper im Maulschlüsseldesign gemacht. Diesen habe ich mit einer 0,8mm Düse gedruckt aber natürlich lässt dieser sich auch mit kleineren Düsen drucken.

Hello Internet Hotstopper

Bootleg Hello Internet Hotstopper. Nail and Gear doesn't belong to me, but I did design the hotstopper myself in 3D builder with basic shapes. Print instructions Category: Kitchen & Dining Print Settings Printer: Anet A8 Rafts: Yes…

Pitstop Extruder Modified

This model is sized perfectly for melting the prusa mmu2s bowden coupler into the 3d printed part Print instructions Printer - Prusa Mk3s Infill - 20% Gyroid Supports - None

Heartstopper - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Gold PLA+ Sunlu Silver PLA+ Sunlu White This print uses 4 unique filaments Swap Instructions: Start with Black At…

Wall spacer for Ikea Rodulf desktstop

Let a space between the wall and the desk to allow free move.

Multi color Pitstop extruder fan grill (Prusa logo)

A new fan grill for the pitstop extruder, multi color print

Nick Nelson - Heartstopper Funko

Nick Nelson Funko made with AI and Blender

Grill Door Magnetstop Sparepart

The doorstop of my lovely bbq grill is broken this summer. So I quickly redesigned a new case for the magnets with Fusion360. Printed in PETG check the fotos for bed alignment. You'll need support for both 90° overhangs.

Gurtstopper

sollte mindestens mit PETG gedruckt werden, PLA wird zu schnell weich im Auto

Replacement carrier for GEZE Einzugsdämpfung Levolan Softstop

Angeled printing is advised – so that the mechanically stressed parts (especially the hook for the spring) are bonded together more stable. I made it for a SoftstopDuo, but it could work for single sided as well.

Heartstopper - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 85x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu Silver PLA+ Sunlu White This print uses 4 unique filaments Swap…

penelope pittstop model with upgrade

here is a disappointing Penelope Pittstop - from wacky races model. I am afraid there is no way for her brolly to survive. it is also a nightmare to get the supports out of the inside of the car without pulling her arm off! I have added…

Lightstopper - Rollohalter

Die angehängte .stl ist der Doppelpack für ein Fenster und stützt sich beim Drucken selber. Keine weiteren Supports nötig. 100% Infill empfohlen.

Brompton Seatpoststopper

This part slots into the lower member of the rear triangle (as seen in the picture) and is held in place by a cable tie. The cable tie is non-load bearing. Should fit all 16“ Bromptons, allthough ive only tried it on my brompton from the…

PitStop 1.2 Mosquito Remix

This is a remix of MihaiDesign's awesome PitStop 1.2 extruder. The 1.2 version of the PitStop does not appear to be here on Thingiverse, so if you want to use these parts, you'll need to go to the MihaiDesigns website and get them. This…

Hello Internet Hotstopper

I created this model a while back to have my own hot stopper displayed on my desk. I'm not 100% happy with the proportions yet, but it's passable. Note: The Nail and Gear has been released into public domain by Hello Internet. ( ref )

penelope pittstop model with upgrade

here is a disappointing Penelope Pittstop - from wacky races model. I am afraid there is no way for her brolly to survive. it is also a nightmare to get the supports out of the inside of the car without pulling her arm off! I have added…

Holder for a door-windstopper/Halterung für Türzugluftstopper

A model I made to hold the windstopper, so it goes along with our door. It is made for a windstopper with a diameter of 85-90mm and a doorwidth of 45cm. I added a bit of felt so it could slide along our hard floor. Feel free to remix the…

Door Limitstop / Türstopper/Anschlag

I printed it with a Prusa Mini, Nozzle 0.6 mm and variable layer height with TPU in about a hour. At the bottom I added some small infill to make the bottom more stiff, otherwise this thing is empty to make it more flexible. You can stick…