Liczymy pasujące modele…
LONGER LK4 Pro / LONGER LK5 Pro / Alfawise U30 Pro touch screen display cover to protect it from dust when printer is not used. Remixed from https://www.thingiverse.com/thing:4603493 Use a M3 55mm screw for the door pin Print Settings…
Custom hot end cooling for Longer lk4 pro and Alfawise U30 like printer, I've made it smaller than the previous iteration ( blowie-mk1 ) using only one 5010 part cooling fan and a 4010 fan for hot end cooling . I've re-designed the…
This is a pretty sturdy mount for your BLThouch and require no modification on the printer, for mounting it you'll need 3 M3 screws with a lenght between 8 and 11 mm. For mounting the blthouch I used the 2 M2,5x16 bolt that came whith the…
This is a remix of Pappadakko's redesigned dashcam mount for the 5th-gen 4Runner to work with the U3000 rear camera. I printed it in ABS to help prevent warping from heat in the summer. I recommend installing the camera on the…
I recently upgraded my 3D printer to a direct drive extruder, but with the increased weight on the gantry, I notice a significant amount of drift toward the unsupported side of my printer. In this case, I should also upgrade the printer…
1.1.9 marlin with the Ender 3 Pro settings + Screen FW (Screen software) (Fan duct, No no raft or support required - easy to print) (line 877) if you have problems with the extruder dr. define INVERT_E0_DIR true Enjoy and happy 3D…
Main plate of the gantry.
This is a holder for installing a quieter cooling fan for the electronics box on a Longer LK4 Pro or Alfawise U30 Pro. Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 100% Filament: FDPlast SBS orange Notes: Additionally…
The MOD for the ERCF SturdyBunny MOD replaces the ever-problematic micro -Servo with a regular Servo. The design has some similarities to Mr Goodman's Large Servo PushMOD but differs in my design not requiring the Servo to remain…
Check out the new version! Blowie MK2 With this custom hot end shroud you can mount two 5015 blower fans for part cooling that drastically improve the quality of overhangs and bridging compared to the original fan. I used the original…
I can send the source file to solid works by mail, if anyone is interested Print instructions Category: 3D Printer Parts Summary I can send the source file to solid works by mail, if anyone is interested
Version of 2022 Updates: More strong; Small improvements; Back plate without screws; Can be placed on the right or left side of the printer; Version compatible with insert nuts(I used M3x3x4.2mm insert nuts); Version without Reset button;…
Version with the use of a 40mm fan and a two 5015 turbine. "Hurricane" cooling is very efficient and allows for long bridges. The pictures show a 100mm bridge test. I add versions with one turbine (left, right).
Some accessories to improve the guiding of the electrical wires for the Alfawise U30 printer. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.20mm Infill: 30% Filament: Geeetech PLA Blue
Cassettiera che ho montato sulla mia Longer3D LK4 Pro (ma compatibile anche con LK4, Alfawise U30/U30 Pro e simili). i cassetti li ho montati solo a sinistra perchè a destra ci ho messo il raspberry con relativo supporto per il display…
je partage ce petit support de bobine que j'ai modélisé. il se monte sur le profilé 20mm d'une imprimante. vous aurez la bobine dans le même sens que l'extrudeur comparé à d'autres support où la bobine est à 90° de l'extrudeur. vous aurez…
I used the 46 cm model MicroSD extender from www.aliexpress.com/item/32875435875.html?spm . The model now fits the micro 3d card reader extender tightly, wasting less material in the process and printing faster. Also, I changed the holes…
All extra parts you need... Easy to print no raft or support needed Fixed Marlin ;-) 1.1.9 & Screen FW (Screen software) This makes your #3Dprinter (24v.) fans very quiet https://youtu.be/g1-WlRZS110 Enjoy and happy 3D printing...…
Made minor modifications to fit FragrantAbyss's filament guide to most Longer/Alfawise printers. Also added cable clips to manage the extruder/Z cable bundle and the carriage cable bundle. Cable clip borrowed from here:…
I will add describe as soon as possible. thx :D You can use prusa Mk3s manual. Used 3030 alu extrusions: 3x 354mm 2x 330mm 2x 320mm Used 8mm steel rods: 2x 370mm (X axis) 2x 355mm (Y axis) 2x 320mm (Z axis) Print Settings Printer Brand:…
Ho realizzato questa base per poter montare l'Hero Me Gen 3 fan duct, gli altri pezzi potete recuperarli dal progetto originale. I fori per fissare le ventole sono stati adattati per usare dei bulloni M3. Il file potrebbe avere ancora…
STL necessari per montare il sistema di doppio asse Z meccanico su Alfawise U30 Pro. STL modificati per poter utilizzare con cinghia chiusa da 610mm. Print Settings Printer: Alfawise U30 Pro Rafts: No Supports: No Resolution: 0.2 Infill:…
This cooling duct is intended for use with the standard unmodified Alfawise U30 Pro, 3D printer The best cheap or free Alfawise U30 Pro upgrades https://youtu.be/z6c4fTHUUYk Print Settings Printer: Alfawise U30 Pro Rafts: No Supports: No…
Simple clamp mount to grasp the rear view mirror arm on a Kia Niro and to hold the Thinkware u3000 dash cam. This relies on the plastic cable cover shroud to be in place. This holds the camera more out of the way than stuck on the window…
Tested and working. For model of carriage thanks for @hadolfov: https://www.printables.com/model/271037-longer-lk4-alfawise-u30-carriage Models of funduct I recommend from Dmitry Sorkin: https://k3d.tech/ehp/releases/
* Italiano * Non mi piace per niente avere l'ingresso della tessera MicroSD sul retro della Alfawise U30, non mi piace neanche il formato Micro-SD. Cercando in rete ho trovato vari adattatori ma tutti quelli che ho trovato fanno…
I really liked CyfroN's fan housing. I love how it's a single part that is easily and quickly attached/removed from the gantry plate without having to disassemble anything (unlike most other big fan mods). But I felt it could use some…
Remix pour la mise en place d'un Micro Interrupteur Fin de Course avec 3 Broches comme détecteur de fin de filament. Eng Remix for using micro switch with lever arm for the filament sensor. Category: 3D Printer Accessories
* Italiano * Ho provato vari supporti per le ventole ma quello progettato e realizzato da Freedzy lo ritengo il migliore in assoluto, è adatto per le ventole originali della Alfawise U30 e genera un ottimo flusso d'aria per quando si…
Modular Fang made for Alfawise U20/U30, Creality CR10, TEVO Tornado, etc. Made to use 2 40mm fans, one for cooling, one for the hot-end). Support multiple hot-ends: MK8/MK10 E3D V6, All In One Evo Also support BL-Touch and Touch-Mi…
This remix is based on the remix of The Mad Slicer , which was based on the original model from AngryHulk on Thingiverse . It can now be mounted on an Alfawise U30 using the original screw mounted bracket. The file is named…
For microSD holder you need 2 screws M4x12 or M4x15. Maybe some glue )). Print Settings Printer: Longer LK4 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 30% Filament: FDPlast SBS orange Category: 3D Printer Parts
Alfawise U30 smoother mount holder.
This is a microSD to SD Card adapter for Alfawise U30. I made this because I do not like microSD cards and because I do not find it practical the card reader to be on the back of the printer. I used this card extension:…
This is a mount that lets you mount a Thinkware U3000 rear camera to a Silverado EV with a midgate. The rear of the truck cab completely opens up and the glass is removable and stowable. For the stock glass stowing compartment to work,…
I made this LED holder for my Alfawise U30 hotend that is modified with https://www.thingiverse.com/thing:3140632 . Created for an extra bright 5cm cold white LED strip with 12 Volts. For 12 Volts I bought an DC-DC Converter and used the…
A skr 1.4 support to the longer lk4 or alfawise u30 support. Printed in PLA
LD-Systems #U308 #IEM T -#CLIP #RepairSet /////////////////////////////////////////////////////////////////// https://www.paypal.com/paypalme/satch5150 ///////////////////////////////////////////////////////////////////
This is the version for installing titanium extruder and E3Dv6 on Longer LK4 Pro (Alfawise U30 Pro). Hotend in Melow store version - does not contain a fitting, but only a plastic piece for holding the tube. UPD.v3 Fixed several model…
Remix from: https://www.thingiverse.com/thing:3826719 Instead of source microSD now with Standard SD Print Settings Printer: Alfawise U30 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 25% Filament: Amazon basics PLA red…
Support pour Strip Led autocollante de 8mm a insérer dans l'axe X pour éclairer les impressions Category: 3D Printing
support tool alfawise U30 Category: 3D Printer Accessories
This is a remix of the hot end design and it makes the good design better, It allows for all the fane to be slid in and does not require any screws. Print Settings Printer: Alfawise U30 Rafts: No Supports: Yes Resolution: .2mm layer…
Upgrade for mounting a microswitch sensor to enable automatic bed leveling on the alfawise u30. This model is made to mount the filament runout sensor that came with the printer and use it as a probe to gather bed leveling data. Feel free…
front switch link switch : https://fr.aliexpress.com/item/32950008721.html?spm=a2g0s.9042311.0.0.1d2a6c37wuBMrS Print Settings Printer: AlfaWise U30 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Generic PLA silver Category:…
This is a variant of installing a Titani extruder with E3Dv6 on a Longer LK4 (Alfawise U30). The project is under development and has not been tested yet. Category: 3D Printer Extruders
A viser sur l'axe X de l'imprimante avec les vis d'origine
I have a Thinkware u3000 that won't stay running so I purchased a Focuway T5-Pro to replace it and made this adapter to avoid sticking something else on the window but the Focuway is apparently DOA so it is being returned, sigh. However,…
This is a minimal mount for the E3D Revo6 with Evo6-style mount for Longer LK4 Pro or Alfawise U30. Mount consists of three main parts: X-Carriage Base Adapter Revo6 Mount Base - Part A Revo6 Mount Base - Part B This also includes a mount…
Just like it says on the label, this is a gantry adapter plate to mount the Hero Me Gen 5 fan system on several Longer/Alfawise printers. It has been tested to work with the stock Longer hotend, CR-10 hotend, and micro swiss hotend. The…
Filamentguid with runoutsensor. Remix from: https://www.thingiverse.com/fatihmazi I elavetd Filamenttunnel to match the hight of my extruder: https://www.amazon.de/gp/product/B07WV653KW/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 Now…
Modified the cooling fan on my Alfawise U30pro to get some air around the stepper motors when printing ABS, PC-ABS or Nylon, so the housing was removed and a 60x20mm fan was added. Unfortunately, the fan exceeded the total height the feet…
EDIT: After several months, I noticed the printed washers had warped significantly. Maybe it's PLA's tendency to do exactly that when under constant stress, or maybe it's the heat making its way through the neoprene. Probably it's both.…
This is a custom-designed camera holder for the Alfawise U30 3D printer. It allows easy mounting of a camera for monitoring or time-lapse recording. The mount is optimized for stability, easy access, and simple installation – no printer…
I added 4040 Rail Mounts and a pair of tie loops. Print Settings Printer: Mingda Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament: unknowen PLA Category: 3D Printer Accessories
I liked this design, I did have to tweak it to fix my stock U30. I rebuilt my U30 clone with new controls and a new hotebd back plate with dual cooling fans: Amazon.com: Longer 3D Printer Dual Blower Kit Upgraded LK4 LK4 PRO LK5 PRO…
I wanted to reuse my U30 Pro filament runout sensor (Same as LK4 Pro), but the original needed 0.5mm adjustment for me, I modified the screw holes to be M2 to reuse original screws, I redesigned it a bit but it's 95% same as the original
I needed a powerful 5V power supply module for my Raspberry PI setup. And I found this module on Aliexpress. It advertised as 5V 5A power supply and my testes confirmed that it holds 5A just fine and keeps 5V output voltage up to 8A. It…
From scratch design of an assembly that enables a Neewer NL660 pole mounted studio light to be mounted atop a Dell U3011 's rear monitor arm. Print the pole lying down for extra strenght. I printed in PolyTerra PLA Black, 215/60, 0.6mm…
How do i transform my Alfawise to include all changes PRUSA release for its printers. I suggest to print with no less than 35% infill. And remember, parts that goes aroungd extruder is better to have in PETG not to melt them down as first…
Support pour strip LED autocollante 8mm. Réalisé en plusieurs parties de 10 cm emboîtables début milieu, fin) et une de 3.5 pour avoir la taille du plateau. Modulable à la longueur que l'on veut donc. Les fichiers ont été modifié car…
Comparatore per livellare il piano della Alfawise U30 realizzato con un calibro per misurare il battistrada dei pneumatici. Il calibro si aggancia al supporto ventole con 3 calamite (quelle per le lavagne magnetiche), la piastra frontale…
Contenitore per MicroSd posizionato sull telaio della AlfawiseU30 Category: 3D Printer Accessories
Cover di protezione per il display dell'alfawise U30 Per la chiusura ho utilizzato delle calamite e per i perni due chiodini e due ranelle Category: DIY
Guidafilo per Alfawise U30 con 4 rulli con possibilità di direzionare il filamento in varie direzioni sù giù, destra e sinistra estraendo e ruotando le testa con i rulli. Per i perni dei rulli ho utilizzato dei semplici stuzzicadenti…
Maniglia per spostare il letto/piatto di stampa per alfawise U30 Category: DIY
Supporto per prevenire la rottura dei cavi estrusore Category: DIY
Mollette/clip da agganciare al telaio della stampante, gli smoother sono semplicemente infilati nella clip Category: DIY
Z Stop per Alfawise U30 in due versioni una in verticale e una in orrizzintale Category: DIY
This is a replacement for the original Extruder. You have to put PTFE tubes in the the Parts so that the Filament runs through them. I designed this because the original Extruder was squeaking sometimes due to the filament rubbing on it.…
Ordered my lens from Japan and it did not come with a Tripod Mount ring, So I drew one up. Printed it on its side and use tree supports for easy removal.
