46 modeli
Wandhalterung für das Ladegerät vom Audi E-Tron. Ladegerät kann entfernt werden, ohne die Halterung zu lösen. Kein Support notwendig, keine speziellen Druckeigenschaften notwendig. Wall mount for the charger from the Audi E-Tron. Charger…
It's a wallholder, it adheres to the wall using doublesided tape. Edit 2024: added a hole for a thumbtack.
Wallholder for Apple Watch Ultra bands, they are a bit wider
A wall mount for Mitsubishi's air conditioning unit's remote controller (type SG16L). It's a snug fit. Will probably fit other remotes as well. Mounts with two 3mm countersunk wood screws. Print Settings Printer Brand: Wanhao Printer:…
This is a Silica Gel Holder for Dry Boxes. It is designed for reusable Silica Gel with diameter 2mm-4mm, for example this:…
Wandhalterung für Shelly Modul, welche einfach in die gehäuseschale eingeklippt werden kann. Die Löcher haben einen Durchmesser von 4mm.
Remix of the attachment holder for the vacuum pipe into a three Accessoir Wallholder. Should work for all 32mm diameter accessoires. Mine printed on a Voron 2 with Nobufil Astro Black ABSx in 0.2mm and three perimeters
Wallholder for 16 batteries. AA and AAA versions included. Uses 2pcs 3x15mm (or longer) woodscrews. Holders in pictures are printed with 0.6 nozzle, 0.3 layer height, 2 walls of 0.8 extrusion width with 3 bottom layers and 4 top layers…
camera mount for tapo c210.. but it works with tapo c200 too. Category: Parts
I created a 90 degree corner holder for the Unifi Protect G5 and also G5 Pro Camera.
Bose Solo 5 - Wandhalter Optimal zur schönen Darstellung des Wohnzimmers. PLA Lochvorgabe führ Schrauben Optimal
It can be locked so it won't come off easily. Therefore, it is also possible to install the wall holder upside down.
Very simple brackets for mounting a Bosch DIY tool charger AL1830CV on the wall (DIY chargers don’t have the wall mounting feature as the professional tool chargers). It uses only the 4 standard enclosure screws, no modification of…
This is a hygrometer wallholder. It fits for this hygrometer: https://www.amazon.de/gp/product/B07JDSHD4Z/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 You can glue it at a Wall of your transperant dry box and slide the hygromter in it.…
Wallholder for Hairdryer. Diameter 83cm. 3 Versions: For Screw (never tested, tell me if it works properly) For Flat Doubletabe For Geltape (tested, wors fine)
A simple remix of the GREAT Xiaomi Mijia Thermometer Wallholder by knackwurst that can fit between two wood pieces of the Nordic Acoustics woof & wool wall panels. Printing You gonna need supports . I recommend to print with the mount…
This is a yet another system for filament color samples. The samples can be clipped together and hung on the wall. The samples are best printed with the receptacle facing to the heat bed. It hides color bleed if many are printed in…
Please look at the original: Playstation VR2 (PSVR2) Headset Stand (updated Mar 4) von psybertech | Kostenloses STL-Modell herunterladen | Printables.com
Wallholder for a total of 6 plates. Slots are 2 mm wide. I uploaded my 3mf file because the wallholder itself has some support blockers in it.
I am using a tablet with QI charging in my apartment. I didn't want to use a fixed mount as I wanted to be able to quickly grab a tablet and use it elsewhere. Therefore I designed this magnetic wall charger. It uses 4 10kg rated magnets.…
First version is just simple holder. Second version is made with place for decorative plate. Hole in back is made for this style of sucker. Or you can use flathead screw.
A simple Wallholder for standard 1kg spools, with a clamp-style Holder for a PTFE-Bowden Tube. Some Data: Fits 4mm outer diameter PTFE Tube Filament spool holder diameter: 35mm Filament spool holder endstop diameter: 45mm Partslist: 6x…
Desigend for the Sony WH-1000XM5 but works with any Headphone/ Headset. Wallmount hole is for a 3mm Screw. My Printsettings: Layer hight: 0,2 Wall Count: 3 Infill: 15% supports: no
I couldn't find a holder for my neoblade, that fits on my honeycombwall.... so i united two different things 😊
Ein abgewinkelter Wandhalter für Kippschalter mit einem einbaudurchmesser von 20mm. Einer mit extra dünnen Rand.
Ein abgewinkelter Wandhalter für zwei Kippschalter mit einem einbaudurchmesser von 20mm.
Made a sturdier wallmount, u can use up to 40mm spacer on both sides to get some offload. U need to use support on buildplate for the hole in the middle. Print Settings Printer: Voron 2.4 Rafts: No Supports: Yes Resolution: 0.2 Infill: 40…
Simple storage possibility for elec. screwdriver Printed via: MKS3+ PLA 4 x Screws (4 x 20 mm) Silcer scale faktor Maktia → 100 % Milwaukee → 100,8 %
Wall mount for Wera tool sets. I designed this wall mount for the Wera 8100 SB VDE 1 Zyklop and the Wera Kraftform Kompakt VDE Safe-Torque Speed control cabinet set 1. The wall mounts should also fit similar sets . There are 5mm holes for…
This is a wallholder for the toothbrush from 7magic. You can just glue it to the bathroom walls. It is designed for a 33 mm diameter electrical toothbrush so it also might fit for other brushes. With the fbx or step file you should be…
Wallholder for IKEA Samla Box (tilted at 23 degrees) 11L (39x28x14 cm) 22L (39x28x28 cm) other sizes not tested yet Material PLA, PETG Layer height ≤0,3 mm Infill 15% Walls 4 or more Support None. The model was designed not to require any…
Just another wallhanger for the electric haircutter. Adjust the size to your haircutter or electric shaver. Inner circle radius is 43 mm at 100%. Printed on MK3 S. 0,2 mm 10 % Infill No supports. Very easy to print.
I have a wall I keep my regularly used video equipment on. So I created this holder for my new Smallrig light. Can be screwed into the wall. Or use the Multiboard compatible version (download multiconnect connectors from David D. )
Arrow Wallmount hold up to 6 Arrows. Diameter of 8mm Mounts with 2 screws
I needed a tray to inspect 30g+ beans, so I designed this tray.
This compact, stylish vinyl wall mount lets you proudly display any 12" LP on your wall – with a clean, floating look and minimal material use. Designed for quick printing and easy mounting, it's a great way to show off your favorite…
Printet in PETG 50%
self designed wallholder for Demineralisation cartridge (Füllix Entsalzungspatronen Wandhalter) large opening, for easy hose fitting and slotted holes, for wall screws... use washers to support screws... Category: Household
Hi i sketched up a Simple wallholder for the Pixel 10 Pro XL, including silicone case, wich is mounted to the wall by two screws. If you scale it in width it schould fit without case and the non XL models as well. Happy Printing
Wall holder made for Biltema MC battery with dimensions 14 x 69 x 109 mm. Designed for Biltema 80-813 https://www.biltema.no/bil---mc/bilbatterier/mc-batterier/gel-batteries/mc-batteri-gele-12-v-5-ah-114-x-69-x-109-mm-2000029877 Should…
Wall mount for bass guitar with a geometric design. Supports a considerable amount of weight. Tested with my bass guitar.
10-15% infill, all plastic's ok. No supports.
self designed wallholder for Demineralisation cartridge (Füllix Entsalzungspatronen Wandhalter) large opening, for easy hose fitting and slotted holes, for wall screws... use washers to support screws... Category: Household
I needed a tray to inspect 30g+ beans, so I designed this tray.
This is a wallholder for the toothbrush from 7magic. You can just glue it to the bathroom walls. It is designed for a 33 mm diameter electrical toothbrush so it also might fit for other brushes. With the fbx or step file you should be…
Wandhalterung für das Ladegerät vom Audi E-Tron. Ladegerät kann entfernt werden, ohne die Halterung zu lösen. Kein Support notwendig, keine speziellen Druckeigenschaften notwendig. Wall mount for the charger from the Audi E-Tron. Charger…
