Liczymy pasujące modele…
Gedruckt aus PLA. PETG, ASA und andere, nicht Flexible Materialien Funktionieren aber auch. Mit mindestens 3 Wandlinen Drucken! Stützen sind nicht nötig. Fusion360-Datei angehängt, somit habt ihr freien Spielraum bei der Anpassung der…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
If you use an "EXTECH EX330" multimeter (although this also happens with other brands), you may have noticed that sometimes when storing it, the "NCV" button gets pressed. This causes the batteries to drain. To solve this, you can use…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Intro: The motivation for this design was to build an eGPU with a $250 budget with used parts with a 10 liter maximum volume. At 165mm x 165mm x 330mm, it comes in at 8.98 liters. Full assembly guide here:…
IMPORTANT 2024-06-27: I reconized an Error with the Upper and lower Wall: It is not straight! I will fix it ! You can print both files in a large printer flat, but do not rotate them on the front Side! Updated 2024-02-07 see below! Safe…
Car key/fob combinations are notorious for becoming brittle and failing. I scanned the fob internals and designed the case to use M3 SHCS and nuts. 0.2mm, PLA, Sovol SV01
Belt guard for X5SA 330x330
Very strong case for Lexus RX400h, RX400, RX330. Uses transparent glue to securely hold the case together. I prefer glue because screws and nuts are not attractive for this kind, small detail. Case will not flex and very strong when…
Bonsai display table (No. 06) square 180x180x33 mm, best for bonsais with round pots. Feel free to scale up or downn until you like the result and it suits your tree.
Replacement feet for small stepladders with a frame of 20.40 mm x 33.40mm and a ground angle of 22°. Print instructions Best printed in non-brittle plastics. PETG is what I used. Printed standing up with a snug support. 0.20mm layer…
Fits the 6mm od tube
Made a 6x33cl Fanta slim can crate. It's made for 5 color printing. But this setup i made it in 4 colors. It's an easy change, all colors are marked and it's the light green color on the leaf that i took the same color as the rest. Hope…
Printing tipps Important: You need to print this adapter with transparent filament! Print it with 0.2 mm resolution. Why? Short anwer: Non transparent adapters will result in dark images. The long answer you can find in my blog. The…
Einsätze für den "normalen" Sortiment Koffer, in jedem Baumarkt zu kaufen, der Größe 445 x 340 x 70 mm Außenabmessung. Oft bräuchte man längere oder breitere Einsätze die man nicht zu kaufen bekommt. Es wurden 14 neue Größen gezeichnet.…
This adapter is meant to fit onto the existing plastic port with the rubber gasket. The same port is used for the standard dust collection box. This part is meant to fit snugly onto the rubber O ring on the Bosch port. The opposite end…
Wall mount for Extech EX330 Multimeter. Attach to wall or shelf with flat head screws. Holder for leads is optional. Print Settings Printer: Sindoh 3Dwox Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: Layer Height 0.2mm…
Hello I have re-created a tape cutter for the normal size tape 19x33mm Enjoy =)
Fan blower positioned to the left with height and angle adjustments.
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a case for the Waveshare IMX335 5MP USB Camera (B) , which is 2K USB2 camera with a microphone that works well in low light conditions. Low light means low light - it will not work in pitch black. This is a…
Kamera Halter für den Voron. Ich habe den Halter Konstruiert um die Kamera IMX335 von Svpro möglichst flexibel am gantry vom Voron 2,4 zu befestigen Am besten druckt ihr es aus ABS und im Winkel von 45° auf dem Druckbett. Ich habe es als…
This model was made using a photo taken from the side. The size is 7.76mm x 32.83mm. Please pay attention to the nozzle size when printing. The wall of the tip cap is very thin and may not print properly.
A simple holder brackets for power supplies or anything else, which is 56mm x 33mm. I printed it in PETG to accommodate for the heat output of my power supply.
OPENIPC VTX338_AIO outline and mount holes
Welp. Do you like putting things that are way too big onto things that absolutely did not ask for it? Then this is for you. This adapter lets you strap a massive blower fan onto a 75W GPU... completely reasonable behavior. It's a tight…
4x box 164x104x45 , 2x box 163x140x45 mm
Printed with PLA and it works fine but might need to use a tool to get it off so maybe try PETG. STEP file included.
A model of a 7x33 Sako cartridge, for no reason.
Improved X-ACTO X3311-Compatible Knife Cap I purchased an X-ACTO X3311 because... well... I needed a knife. When I got it, I was very, very disappointed with the sheath/cover that's provided. It's very thin and very loose. Me being as…
Gridfinity 3x1 Stylo x33 - Diam 0.85 with fusion360 file
A simple screw in holder for a 50x33 mm power supply brick. Uses 3.5 mm wide screws.
So I plan to design a mod to fit the YiHi SX330-V3B board. As i couldnt find anything around i thought i would measure out mine and start from there. This chip was taken out of a Sigelei 150w TC mod that has seen better days. Hopefully…
Simple template to route out recess for hinge Habo 571 version 115x33
Prints without supports. While I use with 1" on center metal and wood peg board, There are Sy's peglock for many kinds of walls. Sy＇s Peglock - Locking Pegboard System by StellasFun | Download free STL model | Printables.com Sy＇s Peglock…
Extech ex330 holder for ikea skadis
Small wedge to stop the AAA batteries from disconnecting (the one on the right has an annoying tendancy of coming out of it's socket and rendering multimeter useless). Glue the wedge flat side up to the inside of the battery cover (see…
This is my first upload to Printables, and one of my first successful models from inital problem to solution. These Pro'sKit organizers only come with 12 dividers and have 21 slots. Originally purchased @ Micro Center. Here's the link to…
Gridfinity 4x2x33mm vertical with label for SCA tool cabinet top shelf
As voor de Sencys (Praxis) houder voor afplaktape + afdekfolie 1,1m x 33m
embout rentrant 33x33 épaisseur 10mm vis de réglage 40mm épaisseur 14mm / renfort trou central de 6mm
EN : I really liked the great model from Harry's Workshop and Ben Blackburn , but unfortunately it was not fitting my knife. So I took the liberty of adapting the model to my size. Print time is reduced by almost half when printed in a…
This movement spacer/holder should fit AX32/AX33/PC32/PC33 by Epson/Hattori. Check out my build video to see how it's used. I also designed other move spacers so check out my other designs. Build Youtube video:…
I found it difficult to source 10mm diameter linear rods with a length of 325mm and I am too lazy to cut them, so i extended the original mounts to be able to use linear rods with 330mm length.I found it difficult to source 10mm diameter…
Fasteners: 4 of each - M2x8 Hex nuts - M2 lock nuts (regular nuts can be used if camera is not moving)
Right angle blower mount for radeon Pro V340, Instinct Mi25 Mi50 and firepro S7150 X2. Uses a 97x33mm blower fan, I would recommend the Delta BFB1012H
[ENG] A custom-designed dual-stage replacement gear for the sunroof motor mechanism on Lexus RX330 and Toyota Harrier. This part replaces the original factory plastic gear that commonly dries out and strips its teeth, saving you from…
Durable endcap for stepladders with a precise 20 × 33 mm fit, made from upgraded materials (PETG / ABS / Nylon) for improved strength and longevity. Protects floors, enhances stability, and is suitable for both indoor and outdoor use.…
Prints without supports. While I use with 1" on center metal and wood peg board, There are Sy's peglock for many kinds of walls. Sy＇s Peglock - Locking Pegboard System by StellasFun | Download free STL model | Printables.com Sy＇s Peglock…
This model was made using a photo taken from the side. The size is 7.76mm x 32.83mm. Please pay attention to the nozzle size when printing. The wall of the tip cap is very thin and may not print properly.
embout rentrant 33x33 épaisseur 10mm vis de réglage 40mm épaisseur 14mm / renfort trou central de 6mm
Improved X-ACTO X3311-Compatible Knife Cap I purchased an X-ACTO X3311 because... well... I needed a knife. When I got it, I was very, very disappointed with the sheath/cover that's provided. It's very thin and very loose. Me being as…
Welp. Do you like putting things that are way too big onto things that absolutely did not ask for it? Then this is for you. This adapter lets you strap a massive blower fan onto a 75W GPU... completely reasonable behavior. It's a tight…
![eGPU Thunderbolt chassis for EXP GDC TH3P4 + ATX PSU [165x165x330mm - 9 liters]](https://media.printables.com/media/prints/429812/images/3562411_ec2f4b23-3b18-464a-bc88-986318650ad4/screenshot-2023-03-21-182821.jpg)
