Liczymy pasujące modele…
UPDATE 2025/01/19: It seems my model got messed up prior to uploading to Printables. I have uploaded now a fixed model with a battery gap of 3.75mm (on paper, which is the loose fit) and will also recreate the tight fit model (3.45mm…
A simple 1x2x3U Gridfinity Bic lighter bin. this holds the lighter in a flat position. This was designed to be used in a storage box. The bin sits snug around the lighter so it doesn't move to much during transport.
When empty, another 1x1 or 2x1 Gridfinity entity can be stacked on top.
Gridfinity 3x1x3u bin with dividers for 5x 100mm (~4") bits with press fit magnet holes (PFM) This design fits 5x 100mm bits, is stackable, and has press fit magnets (PFM) It is recommended the outside corner magnet holes be used to limit…
Gridfinity 2x1x3u bin with dividers for 5x 65mm (~2.5") bits with press fit magnet holes (PFM) This design fits 5x 65mm bits, is stackable, and has press fit magnets (PFM) It is recommended the outside corner magnet holes be used to limit…
A 3x Atomizer / Vape Stand 1x2x3U for Gridfinity
Please Check Out all my other Gridfinity Tool Holders here ! :D ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1x1x3u Gridfinity Universal Holder for ¼ in Socket Wrench * Any/All ¼ Inch Drive Sockets should fit so…
Once all my other batteries where sorted, what to do with the clunky 9v blocks? and on top, for my few remotes, i do need some spare AAA batteries stored. Lets use the free space of a 4x 9v Block Gridfinity box and store some additional…
I Introduce to you the Microsoft Surface Gridfinity pen case. The case fits snugly around you're pen so it doesn't wobble around. I'ts secured in place with 2 6x2 magnets placed where the magnets inside the pen are. So the pen doesn't…
While I was at designing trays for my batteries, I realized that I wanted non-touching stackable trays for my CR-based batteries. I do not have an extensive need for many CR2450s but I need a few, so a 1x1 by 3u high tray was the deal for…
This wall mount is for a Fanvil X3U VOIP phone. Designed using a base model that was designed by Kyle Campbell. Worked off that model to make the slanted back and hole for Ethernet wire. I found that the best way to print this is to place…
Created a simple carrying/travel case for my Soocas X3U toothbrush body + 1 brush.
This is a replacement phone stand for a Fanvil X3U phone. This stand may also work on similar Fanvil models. If you do try it on a different model please let me know if it works or doesn't and I can update the description. It is modeled…
A Gridfinity bin designed to store and organize watch caseback press dies. Accommodates 12 dies in total: 16mm wide slots: 18/20mm, 21/23mm, 24/26mm, 28/30mm, 31/32mm, 33/34mm, 36/38mm, 40/42mm, 44/46mm, and 48/50mm. 11mm wide slots: 1x…
This is just the die holder for when you use a different box for your crimp tool, as I have with the Paron JX-1601 I picked up from either Temu or AliExpress. This is also a lower height than the original at 1U, as it's just the dies and…
Please Check Out all my other Gridfinity Tool Holders here ! :D ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2x2x3u Gridfinity Socket Holder for the Metric ¼in Sockets and Wobble Extension from the - Harbor Freight…
Corner Radius Gridfinity Bin 1x1x3U This tool can help you find the radius of a corner within 1 - 18 mm. While still fitting in a 1x1x3U gridfinity bin size. You need 1 M3 x 16 screw and nut to hold the bin in place. There are 2…
Replacement for the Soocas X3U cap. Printed in TPU
This 2x4x3U Gridfinity module is designed to securely hold two Surefire 6P flashlights, providing an organized and efficient storage solution. The module features precise, snug-fitting compartments tailored to the dimensions of the…
Please Check Out all my other Gridfinity Tool Holders here ! :D ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2x2x3u Gridfinity Socket Holder for the Imperial ¼in Sockets and Extension from the - Harbor Freight…
A Revoltage Beam Prefiled Pod Holder 1x2x3U for Gridfinity.
Please Check Out all my other Gridfinity Tool Holders here ! :D ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 3x2x3u Gridfinity Socket Storage for: - Harbor Freight QUINN ½ inch drive Sockets and ½ inch extension,…
Please Check Out all my other Gridfinity Tool Holders here ! :D ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2x3x3u Gridfinity Socket Holder for the Metric 3/8in Sockets and Wobble Extension from the - Harbor…
Gridinfinity 3x5u 90mm and 3x3u 50mm 1/4" Hex Bits Holder.
Please Check Out all my other Gridfinity Tool Holders here ! :D ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2x3x3u Gridfinity Holder for: - Horusdy 13 Piece Female Star Socket Set and included adapters ( Amazon…
This is a small 1x1x3U Led light ‘Bin’ for the Gridfinity system. It uses a small standard Led as light source. You don't have to use a white Led. Assemble the parts by putting them together on one side and the press them together on a…
Please Check Out all my other Gridfinity Tool Holders here ! :D ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Extra 10mm Socket holder for: 1/4 inch drive 10mm x2 Up to 14mm Diameter 3/8 or 1/2 inch drive 10mm Up to…
Gridfinity holder for three WD My Passport drives.
Please Check Out all my other Gridfinity Tool Holders here ! :D ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2x3x3u Gridfinity Holder for: - Horusdy 13 Piece Female Star Socket Set and included adapters ( Amazon…
Please Check Out all my other Gridfinity Tool Holders here ! :D ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 3x2x3u Gridfinity Socket Storage for: - Harbor Freight QUINN ½ inch drive Sockets and ½ inch extension,…
I did not like the much more space saving designs which stack batteries because of them touching each other. Hence here comes yet another battery holder for CR2016 in a 2 by 1 by 3 units high bin. It can hold up to 30x CR2016 batteries.…
While I was at designing trays for my batteries, I realized that I wanted non-touching stackable trays for my CR-based batteries. I do not have an extensive need for many CR2450s but I need a few, so a 1x1 by 3u high tray was the deal for…
Once all my other batteries where sorted, what to do with the clunky 9v blocks? and on top, for my few remotes, i do need some spare AAA batteries stored. Lets use the free space of a 4x 9v Block Gridfinity box and store some additional…
Please Check Out all my other Gridfinity Tool Holders here ! :D ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2x3x3u Gridfinity Socket Holder for the Imperial 3/8in Sockets and Extension from the - Harbor Freight…
Gridinfinity 3x5u 90mm and 3x3u 50mm 1/4" Hex Bits Holder.
I did not like the much more space saving designs which stack batteries because of them touching each other. Hence here comes yet another battery holder for CR2016 in a 2 by 1 by 3 units high bin. It can hold up to 30x CR2016 batteries.…
Just a simple gridfinity 1x3x3u to store a tap set. This is the set I have
A Dual Revoltage Beam Pod Holder 1x1x3U for Gridfinity.
I needed storage solution for tons of AA rechargable batteries to be organized. I opted for a design to easy pull the batteries over being able to stack batteries on top of each other, as it would contradict my drawer philosophy to have…
A cheaper alternative to the phone mounts available for purchase. Included is a hole jig in addition to the mounts for easier aligning of screws.
Stackable dremel / proxxon horizontal bit holder for gridfinity system 2x2x3U. Maximum bit head diameter: 14 mm. The clearance depends on your printer calibration, but the parts were designed in two variants: D3.5 - snug fit for the…
Store your kitty filament swatches in a nice little display that slots right into your Gridfinity bases! The print holds 39 swatches (programmer off by one error included!) and it could have been more, but I made the option to sacrifice a…
