Liczymy pasujące modele…
This is a Case for the XL4016 Step-Down Converter. The circuit board size is 65x36,5mm. The holes for the screws have a distance of 58 mm at the longe side and 26mm at the short side. The diameter of the hole is for 3x7,5mm sheet metal…
housing for a step down converter Link Amazon can be printed in PET (preferred) or PLA includes 2 cavities for zip ties to secure your cables inludes a version with “printhelpers” to improve adhesion to the bed and can be cutted off…
Case with mounting holes for jl-12a300 or XL4016. It's a 300W stepdown DC converter. Print top cover upside down, PLA may have too low heat resistance, ABS and other would be better. Module is mounted on 4 plastic elementnts inside, you…
Mounting bracket for the XL4016 DC buck converter module from AZ-Delivery.
XL4016 Case XL4016 Case that can fit on 20x20 or 20x30 extrusion using T-Nuts T-Nuts used https://www.printables.com/model/243890-t-nut-m3-drop-in-rotating-v-slot Im using this to convert the 24v from the power supply to 5V 3A for a…
XLSEMI - XL4016E1 Based Buck Module
This is for the boards with a voltage readout (see images). Adding a fan will allow you to use the buck converter under heavier sustained loads. You will need: 3010 axial fan M2/M3 screws Optional: M3x5x4 (Voron standard) heatset inserts…
A base for XL4016 to protect it, for easy use and to prevent touching it from the bottom when using it.
This is a very good buck converter for LED or other projects, capable of delivering 150W of power. You can find the link for the step-down converter here: https://s.click.aliexpress.com/e/_oCTKc3B
2025-06-24 UPDATE: Top lid should hold in place by itself now. I haven't printed updated version, but everything should be fine. Printed with PETG 0.16 layers 2 walls 20%infill Print with front face on the bed without supports. Buck…
You should be able to print this with no supports. Make sure you run the wires through the supports supplied, and connect the wires before inserting XL4016 into cover. You could super glue or simply melt the inserts if it wont stay in place
Mount for AZDelivery XL4016E1 DC-DC Step Down Buck Converter to power RPI4 with DSI Display and cam. Mounted inside the original Reborn 2 electronics box. Screwed with t-nuts to the right beam, the AZDelivery XL4016E1 DC-DC Step Down Buck…
xl4016 snap-on model,xl4016 with fan
I needed to mount an XL4016 DC-DC converter into my Voron, so I took this DIN mount and sorta turned it inside-out. I put a few non-conductive washers in between the XL4016 PCB and the mount since the bottom of the PCB is not perfectly…
Designed this simple model to make sure i get the dimensions right in other designs. This is not designed for printing. In addition, a CAD file (Kompas-3D) is present.
I needed a suitable enclosure for my step-down module to power my LEDs. I found a file created by @MartinL_2160 and modified it to suit my requirements, as his module differed from the one I am using. It is installed in my VzBot330 to…
Only some slight modifications made. I raised the height about 10mm and remade the appropriate cutouts for terminals. Also had to recessed the cutout to lay board. Only modified the bottom plate..
