1 / 1
Pioneer SX-838 Indicator Lamp Housings
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement indicator lamp housings for Pioneer SX-838 and likely other similar models.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 186
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
The indicator lamp housings were crumbling apart on my Pioneer SX-838. I was unable to remove the old bulbs and replace them without destroying them. These are exact replacements.
You'll need to install the new bulb from the front (fish the leads thru the hole first) and they will push in. I made these out of PLA, but if you make them out of TPU you may be able to push the bulbs in from the back.
The housing for the stereo indicator needs to be put in a certain way, flip it over if the bulb is cut off by the sheet metal.