1 / 6
Keystudio's RPi Pico Breakout Board Mounting Plate
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting Plates for the Keystudio Raspberry Pi Pico Breakout Board.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 23
- Makes
- 0
- Views
- 174
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a mounting plate for the KeyStudio Raspberry Pi Breakout Board. I have included three types or configurations of this plate.
- “base_plate_with_mounting_holes.stl” This Plate has four tabs to screw, bolt or glue to another surface.
- “base_plate.stl” This is the same plate, without the mounting tabs. This Plate is good for protecting the bottom of the Breakout Board and preventing short circuits while using it on your work surface.
- “vice_block.stl” Vice Mount Block. Using either plate, glue the “block” to the back of the plate. This block works well when using the “Prima Nano Vise”, https://www.thingiverse.com/thing:5149089
Hardware Needed to mount the Breakout Board to the Plate: 4, M4x4mm Pan Head Screws.
KEYESTUDIO Raspberry Pi PICO Shield Pico Breakout Board for Raspberry Pi Pico/Pico W/Pico H
https://www.amazon.com/dp/B0D3KWTLF2?ref=ppx_yo2ov_dt_b_fed_asin_title