Birdfy Pro Elite Perch and Accessories
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
You've seen the Birdfy Pro Perch, now feast your eyes upon the Pro Ultra Elite Diamond Perch!Bigger! More holes!…
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 134
- Makes
- 0
- Views
- 717
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
You've seen the Birdfy Pro Perch, now feast your eyes upon the Pro Ultra Elite Diamond Perch!
Bigger! More holes! Compatible with original Birdfy Pro perch accessories.
There is the file for the main perch, and two additional expansion wings ("-Wing01" and "-Wing01R") that you can add to the holes on the sides.
Print "ElitePerch-HoleWing01" with the corresponding "BirbPin2"x4 to connect these together to the main perch. These are plastic snap in pins. You can also use M5 x 16mm screws for an even better hold.
If you're feeling lucky and are confident in your layer adhesion, you can print "ElitePerch-Wing01" with the built-in, push in, pins. These will let you connect the side wings without additional fasteners, but are very easy to break.
Be careful when pushing these together or pulling them apart (clean and sand the holes and posts first to make sure the fit is not too tight).
Print in ABS/ASA/PETG for outdoor durability.
Also included is the "SupportClip01". Print 2 or 4 of these to clip the side wings onto the main feeder, to make sure they don't sag or wiggle as much.
For the other Pro accessories, see also: Pro Perch Accessories Hummingbird Feeder Suet Ball Holder
Bonus custom Accessories: Suet Cube Holder
Print Settings
Printer Brand:
VoronDesign
Printer:
Voron2 300
No
Supports:
No
0.2
Filament: Generic PETG
Category: Outdoor & Garden