1 / 1
1/4-20 Camera Mount for Official Prusa Enclosure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fits a PTZ security camera
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 30
- Makes
- 0
- Views
- 162
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I've been using an Amcrest IP2M-841 V3 PTZ camera with a docker container to export still images to prusaconnect. I was wanting a way to mount the camera to the top of the enclosure but found none. Thanks to @Lars putting together the entire Prusa enclosure in Fusion 360, I was able to design a camera mount that worked for the official enclosure. Easy install if you have the hinged lid (highly recommended).
To make the camera work with Prusa Connect, I use nunofgs' docker config.
Use any RTSP camera with Prusa Connect · GitHub
How I printed on my Prusa MK4:
- Prusament PETG
- 0.2mm layer height
- 4 perimeters
- 20% adaptive cubic infill
Additional Hardware:
- 4x 3mm hex nuts
- 4x M3x10 socket cap screws
- 1x ½" ¼-20 screw to attach camera