1 / 7
ClickTags - magnetic nametag with attachable interest wings - the queer & kinky nametag — image 1
1 / 7

ClickTags - magnetic nametag with attachable interest wings - the queer & kinky nametag

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The ClickTag was originally designed for a kinky event to enable people to show their contact interest and role

Rating
0 / 5
Likes
20
Downloads
94
Makes
0
Views
945
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

The ClickTag is a nametag that was originally designed for a kinky event to enable people to show their contact interest and role.

Attach or detach one or up to four of the color coded wings as your mood or interests change - they snap into place with a very satisfying click. 

The tags are designed to be attached to your clothes or accessoires with a magnetic holding plate or alternatively a safety pin if you prefer that option or don't have magnets at hand. 

TL:DR

  • 4 pieces 10mm x 2mm gold plated magnets for each ClickTag
  • Use PETG, not PLA
  • Use a multi material printer
  • Read and obey the license at the end of this description

Color-Coding

We used the following filaments and color coding at our event, but of course you can modify, extend and adapt the concept to your needs:

Body and Teams

Body Standard  ◆ matte white RAL 9003 ◆
Body Paramedics  ◆ red RAL 3024 ◆
Body Awareness-team  ◆ teal RAL 5018 ◆ 
Body Info-team  ◆ gold RAL 1036 ◆

Text

Text dark  ◆ matte anthracite RAL 7016 ◆
Text light  ◆ matte white RAL 9003 ◆ 

Contact interests

I'm interested in talking  ◆ magenta / pink RAL 4010 ◆
I'm interested in playing  ◆ signal-green RAL 6037 ◆
Please don't seek contact to me / leave me alone  ◆ marine blue RAL 5003 ◆

Role

Top / Dom  ◆ red RAL 3001 ◆
Switch  ◆ neon orange RAL 2005 ◆
Bottom / sub  ◆ yellow RAL 1023 ◆
 

How to print

I strongly suggest NOT to use PLA for the tags. Leaving them in a car or tent or even backpack in the summer sun might heat the tags so much that PLA will deform to an ugly mess. I used PETG for all tags I made.  

The text / logos on the ClickTag is made directly in Prusaslicer using the emboss tool (T) in modifier mode or add an svg modifier for logos. Text / logos should be embossed at least two layer heights deep, usually 0.4mm. Use the oneLine-3mf or twoLine.3mf as an example. 

The wings can be printed with or without supports. With supports, you can place the visible face on the print bed, that gives them a nice surface. without support, the wings will have the top layer surface your printer produces. 
If you print with supports, custom support parts are included in the model. Print them from PLA if the wing is printed from PETG. That way the supports are very easy and satisfying to remove. 

The tag should be printed with 100% infill. The magnet holder and wings are fine with 2 perimeters and 20% infill. All parts are fine with 0.2 mm layer height.

The model is designed with a multi material printer in mind. You could print the ClickTag with a single material printer, but you would need to make filament swaps by hand or print blank tags and write on them by hand. 

How to assemble

You need 4 magnets 10mm x 2mm for each tag - two for the tag and two for the magnet holder. 
I strongly suggest NOT to use the normal (silver) nickel plated magnets for this model. Having nickel together with sweat so close to your skin for extended periods of time can lead to allergic reactions. Use gold plated magnets instead, they are only a few cent extra. 
Attach the magnets with superglue. Doing this on a steel surface will cause the magnets to hold themself in place during the drying time of the glue - I strongly recommend that. 

If you want to use a safety pin, use one with 0,6 mm wire and 26 mm overall length.

Our design guidelines - for reference

For our event, we used the font “Cloudy with a chance of love”, 12 mm text height for the names and 10 mm text height for the pronouns. 

Licence

  • You are NOT allowed to use this model, if you don't agree to one or more of these rules.
  • You are free to use the model in any noncommercial way. That means you can print it for yourself or others, as long as you don't follow business interests.
  • You are free to remix the model, and you are especially encouraged to design additional wings. All remixes must be shared under the same license agreement as the original model, including this text and the license details below. 
  • If you send the model to someone else, this text and the license details must be transmitted together with the model. 
  • You are NOT allowed to earn money with this model or remixes of this model, as long as you didn't get a specific license for this use case. Get in contact if you're interested. This includes the use for commercial events, festivals or similar, where you don't directly sell this model or prints of it, but use it as a giveaway or present to your paying customers or visitors.  
  • You are NOT allowed to share this model on other platforms under your own name, this includes remixes that are only a minimal change to bypass this rule. 
  • You are ABSOLUTELY NOT ALLOWED to upload this model or remixes of it on the platform www.makerworld.com , this includes copying the click mechanism and holding geometry of the wings to other models and uploading them. 

If in doubt whether your use case of this model violates the license agreement, feel free to get in contact for clarification.  

Tags