Mk3S Heatbed wire manager
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.07 – €1.30 net (excluding VAT)
For file: HeatbedConCoverWisker_0.1mm_PETG_MK3S_1h35m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.18 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 1.58 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
a spring stiffener to keep the heatbed wire from getting wonky
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 131
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Modified from the latest heatbed cover (top) from Prusa. place a 6 inch (or so) filament (with some curve to it) into the small hole in the part, then slide the filament into the wire bundle and attach the top to the heatbed.
I did this as I was getting way too many Y-crashes for no apparent reason. it seems that the wire bundle sometimes gets wayward and bumps the extruder wire bundle this fix effectively keeps them away from each other - did not eliminate the problem, but reduced it greatly.