X-Acto Ranger 55 Pencil Sharpener Table Top Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Table/countertop friction mount for the X-Acto Ranger 55 pencil sharpener.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 16
- Makes
- 0
- Views
- 146
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Current design is intended for use with 22 mm thick tops and 3 mm thick foam. Offset or move geometry as necessary for your top's thickness. I have left 1 mm total clearance (0.5 mm per side) for the mount to table top surface. Foam compression is targeted at 1 mm per side. The sharpener mounts with #8-32 x .875" screws and nylon-insert locknuts in the existing design I had the hardware on hand. Adjust geometry as necessary for your hardware. The holes and thickness will work fine for M4x20 mm screws but you'll want to offset the nut pocket by ~0.8 mm per side for the 7 mm hex of an M4 nut.