Hot Wheels Wide Track
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.29 – €1.57 net (excluding VAT)
For file: Widener Final_0.4n_0.2mm_PLA_MK4_1h20m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.43 excluding VAT (range midpoint).
- Weight reported by the author
- 20 g
- Print time reported by the author
- 1.33 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Track pieces that widen the track from the standard one car track to be about 2.5 cars wide.
- Rating
- 5 / 5
- Likes
- 96
- Downloads
- 605
- Makes
- 2
- Views
- 2,447
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
Designed for use with the Hot Wheels RC cars
Gives you a straight away that allows you to pass other racers without having to wait until they crash. Could also be used as a landing pad after a small ramp.
If using the RC cars, use the “Widener - Higher/Less Angled Walls” model as the cars are less likely to crash leaving the straightaway with this version. They'll still crash if using the boost button, just not if only using the throttle.
UPDATE with more testing: even with the slightly higher sides, my cars are still flying off. I will upload a higher guardrail version soon.
Should work with the OEM connectors that come with the kits now. They work with the ones I have at least. For printed connectors I use THIS MODEL and it prints without supports.
Supports: YES. The spot for the connectors needs some supports. Using Prusa Slicers and automatic placement of support enforcers was enough for me.
Layer Height: 0.2mm
Infill: About 25%. You want the part to be rigid but not TOO rigid.