1 / 7
Hot tub (Spa) diverter valve rotor - Master Spa - X279625 — image 1
1 / 7

Hot tub (Spa) diverter valve rotor - Master Spa - X279625

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a diverter rotor for the Master Spa - X279625 2" diverter valve.

Rating
0 / 5
Likes
3
Downloads
68
Makes
0
Views
323
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

The original part breaks, warps, and sticks.  This improved part sticks less and should hold up better.  The fillets and struts are designed to reduce turbulence and thus noise.  Apparently PETG holds up better than PLA in chlorinated water.  Will update after I get some use.  Use a stainless steel M3x12mm for the spindle.  This is the part that breaks on the original because the lower face warps out of square.  The vertical struts are designed to help prevent the warpage in the first place.   The OEM replacement part is $30 and they don't sell just the rotor, you have to buy the whole valve which is a PITA to replace so end up using the rotor and throwing the rest away. 

The make was printed in clear R-PETG (because that's what I had handy) at 70% adaptive cubic infill.   Print it on its side (cylindrical shell on the platter) with supports, so the inter-lamina interfaces are not subject to torsion.  Less likely to break that way.  Old and new parts side by side below. 

Tags