Ergo Utility Blade Holder w/sheath
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ergonomic utility knife
- Rating
- 5 / 5
- Likes
- 58
- Downloads
- 144
- Makes
- 1
- Views
- 1,051
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Update 10/10/24: Added 2 sheath options; lid only cover & belt clip holster;
This is an ergonomic utility blade holder modeled to fit a standard Stanley blade. It does not need screws as the head of the holder has a small latch that bends down allowing to slide in the blades. Light duty use only.
Prints in 3 pieces as pictured and snaps together by contact, you can put a tad of glue in the holder to secure everything in place. No supports needed. Make sure you have a good first layer so that the blade holder latch does not fuse. My slicer makes a 0.5 width first layer by default so i changed it to 0.42 and the clearence is perfect. Use extra walls and over 25% infill to have a firm piece.
If you enjoy this project, please consider following me and joining my supporter tier to help keep my free models coming! Be sure to explore the remixes and check out my other models for compatible accessories and upgrades.
Please note: This model is for personal use only and is not intended for commercial purposes unless you have an active subscription to a commercial license