1 / 10
Clicky Citrus Spinners (2-in-1 Fidget Toys) — image 1
1 / 10

Clicky Citrus Spinners (2-in-1 Fidget Toys)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

You get twice the fun with these two-in-one fidgets: a rotating magnetic “ratchet” fidget and a spinning top 🍋🍊

Rating
0 / 5
Likes
32
Makes
0
Views
780
Reviews
0

Updated at source:

Model information

You get twice the fun with these two-in-one fidgets: a rotating magnetic “ratchet” fidget and a spinning top 🙌

Important: You will need (8) 6mm x 3mm neodymium magnets for each fidget (4 magnets for each half of a fidget)

Here is an Amazon link to the magnets and filament I used: https://amzn.to/3XA7HkC

3D Print Settings for the Lemon & Lime Fidgets: 

  • 0.2mm Layer Height 
  • 25% Infill 
  • Outer Wall Speed 100mm/s 
  • No supports needed 
  • Outer brim on ‘peg’ piece

I have also included a 3MF file with the following print profiles: 

  • Print plate #1 (lemon fidget): 2 colors; pause added at layer 22 (layer height 4.40mm) to insert magnets (make sure to orientate the magnets correctly - see photo)
  • Print plate #2 (lime fidget): 2 colors; pause added at layer 22 (layer height 4.40mm) to insert magnets (make sure to orientate the magnets correctly - see photo)

3D Print Settings for the Orange Fidget: 

  • 0.2mm Layer Height 
  • 25% Infill 
  • Outer Wall Speed 100mm/s 
  • No supports needed 
  • Outer brim on ‘peg’ piece

I have also included a 3MF file with the following print profiles: 

  • Print plate #1 (Orange bottom piece): 2 colors; pause added at layer 22 (layer height 4.40mm) to insert magnets (make sure to orientate the magnets correctly - see photo); variable layer height adjustment added at top of this piece (to help fidget spin better)
  • Print plate #2 (Orange top piece): 3 colors; pause added at layer 22 (layer height 4.40mm) to insert magnets (make sure to orientate the magnets correctly - see photo)
  • Print plate #3: peg piece, 1 color

To assemble insert peg into bottom of each fidget (this will be a snug fit). The top piece will fit easily over the peg so it can be removed on and off.

Have fun printing! 🍋🍊

Tags