Magnet clothing clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clip to your clothes, magnet to your stuff!
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 19
- Makes
- 0
- Views
- 136
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This clip was designed to allow you to clip it onto your clothing and attach things to the embedded magnet.
I have a pair of glasses that included a magnetic sunglasses topper, I could never find a good place to put them when I wasn’t using them and wished for the days when I could simply hang my sunglasses on the collar of my shirt.
You will need a 5mm X 1mm magnet to press fit into the hole.
when printing I would recommend checking the diameter of your magnet with calipers, if the diameter is less than 4.8mm you’ll want to scale this design down a few percent to try and compensate for the difference between the magnets I designed this clip around. The hole was made with a .2mm clearance for the magnet which usually makes a nice press fit. If your magnets are exactly 5mm they will likely be too “big” to fit in the hole and you’ll want to scale it up a few percent to get a good fit. A 4.9mm magnet should technically work but it’ll be really tough to get the magnet in there so be warned.