1 / 2
Sunbeam Coffee Grinder Shim EM0480109
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Alternative replacement burr shim for the Sunbeam Coffee Grinder.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 25
- Makes
- 0
- Views
- 217
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
The Sunbeam EM0480 coffee grinder has bulk grind adjustment achieved through adding shims under the burr attached to the motor. They come in 0.25mm increments but they leave a small gap under the burr which can trap fine grinds. If you are finding that your finest setting isn't fine enough, take a 10mm spanner and remove the top burr, remove the shims and replace with the next size up from this set.
I printed these from PETG with 0.2 layer height (and 0.25 first layer, hence the odd sizes).