VW Passat/Golf wheel center hub cap
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.53 – €0.65 net (excluding VAT)
For file: VW cap-outer-clips_0.4n_0.2mm_PLA_MK4ISMMU3_34m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.59 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 33.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Wheel center cap modeled after the original but with modification to be easily printed. Blank or with VW logo.
- Rating
- 0 / 5
- Likes
- 72
- Downloads
- 773
- Makes
- 0
- Views
- 2,611
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
VW Passat / Golf wheel center cap modeled after the original but with modification (split in two separate parts) to be easily printed OR if you don't want the logo inside, you can go with “blank one object” but supports will be needed. The outer diameter is 65,8 mm and the inner diameter is 56 mm (see the last image in gallery). Please measure your wheel before print.
I also added Gcode files with multimaterial print and input shaping to achieve smoother top layers.
The “outer clips” part can be printed supportless upside down, there are just minor overhangs. The “inner cap” part have some larger overhangs which would require some support of outer ring.
The two separate parts are meant to be superglued together. Tight fit won't cut it. Also note that PLA is not really suitable material for such abused part.. I would suggest at least PETG but rather ABS, nylon etc..
This was made in OnShape, so you can fork it any modify it yourself:
https://cad.onshape.com/documents/a349ed61a2f79110026b47cb/w/7e5ab0b13866a2e95a0454dd/e/0bcd9aa864e93f88b2c2a52d?renderMode=0&uiState=66e1714c7ba965415bfbbc09