1 / 6
Vinyl record holder - wall mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A wall holder for records that are just "under the needle"
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 21
- Makes
- 0
- Views
- 240
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Wall mount for Vinyl records
A wall holder for records that are just "under the needle"
print instructions
print in PLA or whatever you like
0,2mm Layer height, 3 walls, 5 top/bottom
20% gyroid infill
support needed:
- in orca slicer activate support
- type: tree(auto)
- activate “on buildplate only”
You can print it as it is aligned. This way it needs less support (only for the overhangs of the letters) (Var1)
But if you don't mind using a littlebit more filament, I would recommend putting it on the buildplate with the front upsidedown. This gives you a smoother surface on the visible side, but requires more support. (Var2)